El 06/10/14 a las 10:44, David Lang escibió:
If you plug these in to a PC, what do you see different about them?
David Lang
|
this is dmesg output when insert those USB-Serial Adapters.
[11469.913099] usb 3-3: new full-speed USB device number 3 using xhci_hcd
[11469.930215] usb 3-3: New USB device found, idVendor=1a86, idProduct=7523
[11469.930223] usb 3-3: New USB device strings: Mfr=0, Product=2,
SerialNumber=0
[11469.930226] usb 3-3: Product: USB2.0-Ser!
[11469.931745] usb 3-3: ch341-uart converter now attached to ttyUSB1
[11219.224337] usb 3-4: new full-speed USB device number 2 using xhci_hcd
[11219.241300] usb 3-4: New USB device found, idVendor=1a86, idProduct=7523
[11219.241307] usb 3-4: New USB device strings: Mfr=0, Product=2,
SerialNumber=0
[11219.241310] usb 3-4: Product: USB2.0-Ser!
[11221.613677] usb 3-4: ch341-uart converter now attached to ttyUSB0
udevadm info -a -n /dev/ttyUSB1 | grep '{serial}'|
Using this command i get wrong information when i execute on OpenWRT.
If i run in Ubuntu 14.04 this is the output => |ATTRS{serial}=="A6008isP"`|
But if i run on OpenWRT A.A. i get this =>
ATTRS{serial}=="ehci-platform"
how can i reproduce the same logger information in Ubuntu?
--
Emiliano Vazquez | PcCentro Informatica & CCTV
Office: +54 (11) 4635-3218 y Rotativas
http://www.pccentro.com.ar
_______________________________________________
openwrt-users mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
