Emiliano Vazquez
<[email protected]> writes:
>
> config switch
> option name 'switch0'
> option reset '1'
> option enable_vlan '1'
>
> config switch_vlan
> option device 'switch0'
> option vlan '1'
> option ports '0 1 2 3'
Shouldn't frames be tagged at port 0
--8<---------------cut here---------------start------------->8---
config switch_vlan
option device 'switch0'
option vlan '1'
option ports '0t 1 2 3'
--8<---------------cut here---------------end--------------->8---
> config switch_vlan
> option device 'switch0'
> option vlan '3'
> option ports '4'
And this vlan shouldn't be connect?
--8<---------------cut here---------------start------------->8---
config switch_vlan
option device 'switch0'
option vlan '3'
option ports '0t 4'
--8<---------------cut here---------------end--------------->8---
>
My configuration was:
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config interface 'lan'
option ifname 'eth1.1'
option type 'bridge'
option proto 'static'
option 'ipaddr' '192.168.200.218'
option 'netmask' '255.255.255.0'
config interface 'lan3'
option ifname 'eth1.3'
option proto 'dhcp'
option defaultroute '0'
config interface 'wan'
option ifname 'eth0'
option proto 'dhcp'
config switch
option name 'switch0'
option reset '1'
option enable_vlan '1'
config switch_vlan 'eth0'
option device 'switch0'
option vlan '2'
option ports '5 6'
config switch_vlan 'eth1'
option device 'switch0'
option vlan '1'
option ports '0t 1 2 3 '
config switch_vlan
option device 'switch0'
option vlan '3'
option ports '0t 3'
--
http://blogdebart.pl/2009/12/22/mamy-chorych-dzieci/
_______________________________________________
openwrt-users mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
