On Tue, 1 Dec 2015 22:53:20 +0100 Morten Christensen <[email protected]> wrote:
> Den 19-11-2015 kl. 19:22 skrev Morten Christensen: > > It is intended to be used as a openvpn-client for home-work, to be > > placed behind the normal home-network. > > > > If there is a cable in the wan-port, it takes about 7minutes 30 > > seconds, from power on to it tell, it has booted with a beep. > > > > Without a cable in the wan-port it only takes 8 seconds until the > > same beep. > In the GUI switch I have changed the second port from LAN to WAN. > With the wan-cable in the second port, boot-time is normal below 10 > seconds. When I tried again in the original wan-port boot-time was > over 5 minutes again. A thought. Sometimes long delays are due to DNS timeouts. I've no clue whether that would apply here. YMMV. Regards, Karl <[email protected]> Free Software: "You don't pay back, you pay forward." -- Robert A. Heinlein _______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
