Hi,
[nag...@mon1 ~]$ /usr/local/nagios/bin/send2slaves
Creating tar file
Processing for london
opsview.tar.1870.gz
100% 22MB 57.1KB/s 06:27
sudo: sorry, you must have a tty to run sudo
Error installing - moving to next server
Errors requiring manual intervention: 1
[nag...@mon1 ~]$
That seems to be alright then on the slave i run the install_slave file and I
get the nmis.conf error as below.
But If I look in the /usr/local/nagios/nmis/conf directory I have
[r...@mon1 nmis]# cd conf/
[r...@mon1 conf]# ls
contacts.csv escalation.csv iftypes.csv locations.csv logs.csv
models.csv nmis.key outage.dat scripts slave.csv sysinterface.csv
thresholds.csv users.csv
enterprise.csv events.csv links.csv logrotate.conf master.csv
nmis.conf nodes.csv privmap.csv services.csv slaves.csv sysnode.csv
toolset.csv users.dat
[r...@mon1 conf]#
But the install_slave doesnt seem to be picking it up.
Alex
On 18 Feb 2010, at 15:40, Tomas Kucera wrote:
as nagios user from master server run
/usr/local/nagios/bin/send2slaves -t
if it is ok run
/usr/local/nagios/bin/send2slaves
Alexander C. Fossa - Xifos Limited píše v Čt 18. 02. 2010 v 15:09 +0000:
Hi,
I seem to be getting a bit further with my slave install.
However it copies the files to the slave server over SCP fine and then
I run the install_slave on the slave as root and get the error below:
[r...@mon1 ~]# cd /usr/local/nagios/tmp && ./install_slave
Can't access neither configuration
file /usr/local/nagios/nmis/bin/../conf/nmis.conf,
nor /etc/nmis/nmis.conf
I'm not using NMIS and I believe it isn't enabled on my master.
Regards,
Alex
On 18 Feb 2010, at 14:01, James Whittington wrote:
First of all normally Opsview will be running as a user other than
root, most likely user “nagios”.
So you should be trying to do something like this:
r...@opsview-demo:~# ssh [email protected] uname –a
You will need to know the nagios user password to copy.
User nagios will also need a ssh key generated
Here is a good link describing setup of certificated based ssh:
http://www.debian-administration.org/articles/152
Basically you
Create the key
nag...@opsview-demo:~# ssh-keygen -t rsa
Copy the key
nag...@opsview-demo:~# ssh-copy-id -i
~/.ssh/id_rsa.pub [email protected]
Then you should be able to run commands without a password as user
nagios:
nag...@opsview-demo:~# ssh 131.125.78.45 ls -la
Hope this helps.
James Whittington
VC3, Inc.
From:
[email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Jibran
Sent: Thursday, February 18, 2010 7:54 AM
To: [email protected]<mailto:[email protected]>
Subject: [opsview-users] Slave setup errors.
Hi every one.
I been trying from long to make slave work.I installed Ubunto hardy
as a master and ubunto hardy as slave opsview on remote.I installed
opsview repository and every thing went fine.But I am having
permission errors doing ssh from master to slave.
When I ssh fro master using
r...@opsview-demo:~# ssh 131.125.78.45 ls
-l [email protected]'s password:when I put the password which is
for opsview.i get error.
Permission denied, please try again.
I cant copy keys and files from master to slave either.
scp /usr/local/nagios/installer/check_reqs
/usr/local/nagios/bin/profile 131.125.78.45:
scp: ./check_reqs: Permission denied
scp: ./profile: Permission denied
I presume permission problem is related to ssh config or
something.Actually I am not expert with linux if some one could help
me out fixing this problem I bumped my head too much fixing this
problem but all vain..
Thanks for any reponses.
--
This message has been scanned for viruses and dangerous content by
the Xifos Limited e-mail system.
Further information can be found at www.xifos.net<http://www.xifos.net>
<ATT00001..txt>
--
This message has been scanned for viruses and dangerous content by the
Xifos Limited e-mail system.
Further information can be found at www.xifos.net<http://www.xifos.net>
_______________________________________________
Opsview-users mailing list
[email protected]<mailto:[email protected]>
http://lists.opsview.org/lists/listinfo/opsview-users
<signature.asc><ATT00001..txt>
--
This message has been scanned for viruses and dangerous content by the Xifos
Limited e-mail system.
Further information can be found at www.xifos.net
_______________________________________________
Opsview-users mailing list
[email protected]
http://lists.opsview.org/lists/listinfo/opsview-users
