sudo: sorry, you must have a tty to run sudo in this step script execute opsview reload
double recheck sudoers configurations and finaly try on slave as nagios user command 'sudo /etc/somethnig/opsview reload' without '' .. Alexander C. Fossa - Xifos Limited píše v Čt 18. 02. 2010 v 15:46 +0000: > Hi, > > > > > [nag...@mon1 ~]$ /usr/local/nagios/bin/send2slaves > Creating tar file > Processing for london > opsview.tar.1870.gz > > 100% 22MB 57.1KB/s 06:27 > sudo: sorry, you must have a tty to run sudo > Error installing - moving to next server > Errors requiring manual intervention: 1 > [nag...@mon1 ~]$ > > > > > That seems to be alright then on the slave i run the install_slave > file and I get the nmis.conf error as below. > > > But If I look in the /usr/local/nagios/nmis/conf directory I have > > > [r...@mon1 nmis]# cd conf/ > [r...@mon1 conf]# ls > contacts.csv escalation.csv iftypes.csv locations.csv logs.csv > models.csv nmis.key outage.dat scripts slave.csv > sysinterface.csv thresholds.csv users.csv > enterprise.csv events.csv links.csv logrotate.conf > master.csv nmis.conf nodes.csv privmap.csv services.csv > slaves.csv sysnode.csv toolset.csv users.dat > [r...@mon1 conf]# > > > But the install_slave doesnt seem to be picking it up. > > > Alex > > > > > > > > > On 18 Feb 2010, at 15:40, Tomas Kucera wrote: > > > as nagios user from master server run > > /usr/local/nagios/bin/send2slaves -t > > > > if it is ok run > > > > /usr/local/nagios/bin/send2slaves > > > > Alexander C. Fossa - Xifos Limited píše v Čt 18. 02. 2010 v 15:09 > > +0000: > > > Hi, > > > > > > > > > I seem to be getting a bit further with my slave install. > > > > > > > > > However it copies the files to the slave server over SCP fine and > > > then > > > I run the install_slave on the slave as root and get the error > > > below: > > > > > > > > > > > > > > > [r...@mon1 ~]# cd /usr/local/nagios/tmp && ./install_slave > > > Can't access neither configuration > > > file /usr/local/nagios/nmis/bin/../conf/nmis.conf, > > > nor /etc/nmis/nmis.conf > > > > > > > > > I'm not using NMIS and I believe it isn't enabled on my master. > > > > > > > > > Regards, > > > > > > > > > Alex > > > > > > > > > > > > > > > > > > > > > On 18 Feb 2010, at 14:01, James Whittington wrote: > > > > > > > First of all normally Opsview will be running as a user other > > > > than > > > > root, most likely user “nagios”. > > > > So you should be trying to do something like this: > > > > r...@opsview-demo:~# ssh [email protected] uname –a > > > > > > > > You will need to know the nagios user password to copy. > > > > User nagios will also need a ssh key generated > > > > Here is a good link describing setup of certificated based ssh: > > > > http://www.debian-administration.org/articles/152 > > > > > > > > Basically you > > > > Create the key > > > > nag...@opsview-demo:~# ssh-keygen -t rsa > > > > Copy the key > > > > nag...@opsview-demo:~# ssh-copy-id -i > > > > ~/.ssh/id_rsa.pub [email protected] > > > > > > > > Then you should be able to run commands without a password as > > > > user > > > > nagios: > > > > nag...@opsview-demo:~# ssh 131.125.78.45 ls -la > > > > > > > > Hope this helps. > > > > > > > > James Whittington > > > > VC3, Inc. > > > > > > > > From: [email protected] > > > > [mailto:[email protected]] On Behalf Of > > > > Jibran > > > > Sent: Thursday, February 18, 2010 7:54 AM > > > > To: [email protected] > > > > Subject: [opsview-users] Slave setup errors. > > > > > > > > Hi every one. > > > > > > > > I been trying from long to make slave work.I installed Ubunto > > > > hardy > > > > as a master and ubunto hardy as slave opsview on remote.I > > > > installed > > > > opsview repository and every thing went fine.But I am having > > > > permission errors doing ssh from master to slave. > > > > > > > > When I ssh fro master using > > > > r...@opsview-demo:~# ssh 131.125.78.45 ls > > > > -l [email protected]'s password:when I put the password which > > > > is > > > > for opsview.i get error. > > > > Permission denied, please try again. > > > > > > > > I cant copy keys and files from master to slave either. > > > > > > > > scp /usr/local/nagios/installer/check_reqs > > > > > /usr/local/nagios/bin/profile 131.125.78.45: > > > > > > > > > > scp: ./check_reqs: Permission denied > > > > > > > > > > scp: ./profile: Permission denied > > > > > > > > > > > > > > > > I presume permission problem is related to ssh config or > > > > something.Actually I am not expert with linux if some one could > > > > help > > > > me out fixing this problem I bumped my head too much fixing this > > > > problem but all vain.. > > > > > > > > Thanks for any reponses. > > > > > > > > > > > > -- > > > > This message has been scanned for viruses and dangerous content > > > > by > > > > the Xifos Limited e-mail system. > > > > Further information can be found at www.xifos.net > > > > <ATT00001..txt> > > > > > > > > > > > > > > > > > > > > > > > > -- > > > This message has been scanned for viruses and dangerous content by > > > the > > > Xifos Limited e-mail system. > > > Further information can be found at www.xifos.net > > > _______________________________________________ > > > Opsview-users mailing list > > > [email protected] > > > http://lists.opsview.org/lists/listinfo/opsview-users > > <signature.asc><ATT00001..txt> > > > > > > > > > > -- > This message has been scanned for viruses and dangerous content by the > Xifos Limited e-mail system. > Further information can be found at www.xifos.net > _______________________________________________ > Opsview-users mailing list > [email protected] > http://lists.opsview.org/lists/listinfo/opsview-users
signature.asc
Description: Toto je digitálně podepsaná část zprávy
_______________________________________________ Opsview-users mailing list [email protected] http://lists.opsview.org/lists/listinfo/opsview-users
