Paul, thanks once again for your help. I think I'm whole now. There were two slave checks to choose from, and it seems only one of them returns an OK status.
In any event, my slave seems to be working properly and I now have a OK check result. Much appreciated! Craig > From: Paul <[email protected]> > Reply-To: Opsview Users <[email protected]> > Date: Fri, 27 May 2011 10:19:21 +0200 > To: "[email protected]" <[email protected]> > Subject: Re: [opsview-users] New slave issue > > Hi Craig, > > I'm running Multiple: check_opsview_slave_node %SLAVENODE% which reports my > slaves being up/down correctly. > > Could you try that check and see what happens? > > Thanks > Paul > > -----Original message----- > To: Opsview Users <[email protected]>; > From: Craig Pendleton <[email protected]> > Sent: Thu 26-05-2011 17:00 > Subject: Re: [opsview-users] New slave issue >> Thanks for the help Paul. send2slaves -t says its connected to the slave, >> and there are no errors in communicating, which is all good of course. >> Perhaps everything is fine, but I'm just not sure how to confirm this as my >> slave checks are showing critical. >> >> The fact that my slave checks are critical led me to believe my slave was >> not set up properly. On my master server, the "opsview slaves" service >> check says " SLAVE CRITICAL - Problem with slaves: opsview-slave" and the >> "Slave-node: opsview-slave" service check indicates "SLAVE CRITICAL - Error >> returned from retrieval: Status file does not exist" >> >> Is there any configuration that should be done to have these slave checks go >> green (if indeed my slave is working as intended)? Ideally, I'd like some >> way for the master to notify if my slave stops functioning properly. >> >> Thanks in advance! >> >> Thanks, >> Craig >> >> >>> From: Paul <[email protected]> >>> Reply-To: Opsview Users <[email protected]> >>> Date: Thu, 26 May 2011 10:22:02 +0200 >>> To: "[email protected]" <[email protected]> >>> Subject: Re: [opsview-users] New slave issue >>> >>> Hi Craig, >>> >>> /usr/local/nagios/bin/send2slaves -t >>> >>> what does that bring for information? >>> >>> The command you used is to restart the tunnels - I'm running the slaves on a >>> different port; this check complains my slaves are bad too - however they >>> are >>> not :) >>> >>> Hth >>> Paul >>> -----Original message----- >>> To: Opsview Users <[email protected]>; >>> From: Craig Pendleton <[email protected]> >>> Sent: Wed 25-05-2011 22:51 >>> Subject: Re: [opsview-users] New slave issue >>> Attachment: inline.txt >>>> Sorry, I hit send a bit too soon. ?I see these processes running on the >>>> slave: >>>> >>>> nagios ???2014 ????1 ?0 14:42 ? ???????00:00:00 /usr/local/nagios/bin/nrpe >>>> -c >>>> /usr/local/nagios/etc/nrpe.cfg -d >>>> nagios ???2209 ????1 ?0 14:43 ? ???????00:00:00 >>>> /usr/local/nagios/bin/nagios >>>> -uxd /usr/local/nagios/etc/nagios.cfg >>>> nagios ???2213 ????1 ?0 14:43 ? ???????00:00:00 import_slaveresultsd >>>> >>>> The server appears to be configured properly in opsview as a slave. ?Any >>>> idea >>>> what my next troubleshooting steps should be? >>>> >>>> >>>> Thanks, >>>> Craig >>>> >>>> >>>> From: Craig Pendleton <[email protected]> >>>> Date: Wed, 25 May 2011 14:47:02 -0600 >>>> To: Opsview Users <[email protected]> >>>> Conversation: New slave issue >>>> Subject: New slave issue >>>> >>>> I¹ve just installed a slave according to the documentation, and it doesn¹t >>>> appear the slave is set up properly. >>>> >>>> [nagios@opsview ~]$ /usr/local/nagios/libexec/check_opsview_slave -r >>>> cat: /usr/local/nagios/var/nsca.status: No such file or directory >>>> Cannot communicate with slave >>>> SLAVE CRITICAL - Problem with slaves: opsview-slave >>>> >>>> I¹ve verified that I can ssh without password as the nagios user, and >>>> nagios >>>> processes are running on the slave: >>>> ? >>> _______________________________________________ >>> Opsview-users mailing list >>> [email protected] >>> http://lists.opsview.org/lists/listinfo/opsview-users >> >> _______________________________________________ >> Opsview-users mailing list >> [email protected] >> http://lists.opsview.org/lists/listinfo/opsview-users >> > _______________________________________________ > Opsview-users mailing list > [email protected] > http://lists.opsview.org/lists/listinfo/opsview-users _______________________________________________ Opsview-users mailing list [email protected] http://lists.opsview.org/lists/listinfo/opsview-users
