Hi all, Here is the screnario . 3 Systems Configuration :-
P IV 3 GHz HT Processor. Intel 865 motherboard. 2GB DDR RAM DGE 530TX Ethernet Card. 80 GB Samsung Puma HDD I installed RH 9 and recompiled the kernel for make support for Ethernet Card and 2 GB RAM on Mother Computer with the partitions ( using disk druid at installation time ) scheme given below. Primary : /dev/hda1 200 MB EXT3 /boot /dev/hda2 35000 MB EXT3 /home /dev//hda3 2048 MB swap Extended : /dev//hda5 * EXT3 / and installed Oscar 4 Server Succesfully. After that I tried to build oscar client with follow setting in sample.disk.ide /dev/hda1 200 ext3 /boot defaults /dev/hda3 2048 swap /dev/hda5 * ext3 / defaults nsf:/home - nfs It build properly only with one fatal error " Can not open /etc/fstab " . But /etc/fstab were there. Whatever - it make a oscar image with that error. Now started to add client one by one. I added one cleint 192.168.1.1 by boot through bootable floopy created by osar . It got the ip - started to install , and when starting disk partitioning - it faild. And giving the error - "Can not make disk partition outside of the Disk" - after creating Primary /boot partition and then a extended partition. Can you suggest me where I am making error ? Or what to right in sample.disk.ide ? Regards, Krish Now, Installed Oscar Server Successfully . And Then Tried to build -- Impossible = "I" "m" "Possible" . ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ Oscar-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/oscar-users
