Re: [Oscar-users] SATA DISKS

[Bernard Li]

Hi Carlos:   Your files all look fine (menu.1st, grub.conf) so I am at a loss regarding what's wrong.  Perhaps you can try googling for the kernel panic error messages to see if anything comes up.   One thing Andrea suggested though, is taking a look at your image's /etc/systemimager/autoinstallscript.conf and checking to see if there's anything strange.   Regarding the /etc/fstab message, that is a known issue - take a look at the release notes - those can be safely ignored.   Cheers,   Bernard From: Carlos Vasco Ortiz [mailto:[EMAIL PROTECTED] Sent: Tuesday, June 13, 2006 8:54 To: Bernard Li Cc: Oscar-users@lists.sourceforge.net Subject: Re: [Oscar-users] SATA DISKS Hi, Bernard, I have already tested oscar4.2.1r4779-20060513 + systemimager 3.6.3, and oscar 5, and exactly the same problem arose, 'kernel panic' when booting the node. Not sure what to do next... I also tried a new node (without raid, exactly the same hardware) as a server, and the same behaviour occurs. I attach some logs when the image is created, telling that he can't open /etc/fstab when it is there and has reading permisions. Thanks, Carlos Bernard Li wrote: Hi Carlos:   Can you check the file /boot/grub/menu.lst on the resulting node?  I suspect it is not complete...   But unfortunately, I am not sure what is wrong...  Perhaps you can put a post-install script in /var/lib/systemimager/scripts/post-install to fix grub up after imaging, that would be my suggestion.   Cheers,   Bernard From: Carlos Vasco Ortiz [mailto:[EMAIL PROTECTED]] Sent: Mon 12/06/2006 23:51 To: Bernard Li Cc: Oscar-users@lists.sourceforge.net Subject: Re: [Oscar-users] SATA DISKS Hi Bernard, Here is attached si.log from the node. I also attach a ide.disk like the one we used. Systemconfigurator version is 2.2.2-11ef, we are not using a raid in the nodes (only 1 disk, and no need of space on the nodes). The output of the node installation reads like: mv: cannot stat '/boot/grub/device.map': No such file or directory. Probing devices to gues BIOS drives. This may take a long time. end_request: I/O error, dev fd0, sector 0 (14 times this line, carlos add.) Installation finished. No error reported. This is the contents of the device map /boot/grub/device.map Check if this is correct and fix it and rerun the script grub-install. (fd0) /dev/floppy/0 (hd0) /dev/scsi/host0/bus0/target0/lun0/disc use of unnitialized value in concatenation (.) or string at /usr/lib/systemconfig/Boot/Grub.pm line 315 run post_install_scripts And thats all, apart from the beeps... If there is any log that I am missing, please, tell me. Carlos -- Carlos Vasco Ortiz (ITP Tecnología y Métodos) Tel: 34 91 207 91 21   [ITP-only internal ext.: 91 21] Fax: 34 91 207 94 11 mailto:[EMAIL PROTECTED] -- Carlos Vasco Ortiz (ITP Tecnología y Métodos) Tel: 34 91 207 91 21 [ITP-only internal ext.: 91 21] Fax: 34 91 207 94 11 mailto:[EMAIL PROTECTED]

_______________________________________________
Oscar-users mailing list
Oscar-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/oscar-users