See if your /etc/hosts looks something like the suggestions here:
http://svn.oscar.openclustergroup.org/trac/oscar/wiki/TipTwoNetworkInterfaces
It is a bit counter intuitive, but that is the way torque likes it.
On Thu, Mar 12, 2009 at 7:08 AM, Marion Randall <ranmar...@gmail.com> wrote:
> Hi!
>
> Yes. I am.
> Here are some specifics:
>
> [r...@gnlserv01 server_logs]# ifconfig -a
> eth0 Link encap:Ethernet HWaddr 00:1C:C0:AF:10:18
> inet addr:192.168.1.254 Bcast:192.168.255.255 Mask:255.255.0.0
> inet6 addr: fe80::21c:c0ff:feaf:1018/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:492293 errors:0 dropped:0 overruns:0 frame:0
> TX packets:794554 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:36007564 (34.3 MiB) TX bytes:858225391 (818.4 MiB)
> Base address:0x30c0 Memory:e0300000-e0320000
>
> eth1 Link encap:Ethernet HWaddr 00:1B:21:2C:70:C2
> inet addr:137.215.104.218 Bcast:137.215.104.255
> Mask:255.255.255.0
> inet6 addr: fe80::21b:21ff:fe2c:70c2/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:228864 errors:0 dropped:0 overruns:0 frame:0
> TX packets:55044 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:100
> RX bytes:43917228 (41.8 MiB) TX bytes:14417765 (13.7 MiB)
> Base address:0x1000 Memory:e0020000-e0040000
>
> :-)
>
> Rion
>
>
>
> On Thu, Mar 12, 2009 at 1:02 PM, Michael Edwards <miedw...@gmail.com>wrote:
>
>> Are you using two NICs on the head node (one internal and one external)?
>>
>>
>> On Thu, Mar 12, 2009 at 5:59 AM, Marion Randall <ranmar...@gmail.com>wrote:
>>
>>> Hi !
>>>
>>> OSCAR 5.1rc1 as far as I know.
>>>
>>> :-)
>>>
>>> Rion
>>>
>>>
>>>
>>> On Thu, Mar 12, 2009 at 11:48 AM, Allan Menezes <
>>> amenezes...@sympatico.ca> wrote:
>>>
>>>> Hi,
>>>> Which version of OSCAR 5.1 are you using OSCAR 5.1b2 or OSCAR
>>>> 5.1rc18047?
>>>> Allan
>>>> Marion Randall wrote:
>>>>
>>>> Hi!
>>>>
>>>> For certain reasons I couldn't use the new OSCAR version and a supported
>>>> distro for it. However, I was wondering whether there might be anyone who
>>>> had the same error with OSCAR 5.1 similar to the output I've included
>>>> below.
>>>> I'm desperate enough to run the start_over script but I'm not sure whether
>>>> I
>>>> will get the same problem when I come to step 7 or not. In other words, I'm
>>>> not sure whether I configured something incorrectly, or whether it's
>>>> something else that needs to be changed.
>>>>
>>>> Thanks!
>>>>
>>>>
>>>> =============================================================================
>>>> == Running step 7 of the OSCAR wizard: Complete cluster setup
>>>>
>>>> =============================================================================
>>>>
>>>> --> Update Wizard Env (as needed)
>>>> --> Step 7: Running: ./post_install
>>>> Gathering processor count from normnode01.gnlserv01.
>>>> Updating database for machine normnode01.gnlserv01 cpus=2.
>>>> --> About to run /var/lib/oscar/packages/ganglia/post_install for
>>>> ganglia
>>>> Checking if the OPKG has to be excluded...
>>>> OPKG ganglia: Analysing default values
>>>> [ganglia] Ganglia gmond configuration file modified, re-starting
>>>> daemon...
>>>> Shutting down GANGLIA gmond: [ OK ]
>>>> Starting GANGLIA gmond: [ OK ]
>>>> editing /etc/gmetad.conf
>>>> match: gridname\s+.*
>>>> match: data_source\s+.*
>>>> [ganglia] Ganglia gmetad configuration file modified, re-starting
>>>> daemon...
>>>> Shutting down GANGLIA gmetad: [ OK ]
>>>> Starting GANGLIA gmetad: [ OK ]
>>>> [ganglia] Starting up apache...
>>>> Stopping httpd: [ OK ]
>>>> Starting httpd: [ OK ]
>>>> [ganglia] Ganglia page is located at http://gnlserv01/ganglia/
>>>> ************************* oscar_cluster *************************
>>>> --------- normnode01---------
>>>> Shutting down GANGLIA gmond: [ OK ]
>>>> Starting GANGLIA gmond: [ OK ]
>>>> --> About to run /var/lib/oscar/packages/mtaconfig/api-post-deploy for
>>>> mtaconfig
>>>> ************************************ WARNING
>>>> ************************************
>>>> OSCAR could not set up the configuration for any mailing service on the
>>>> server.
>>>> The current version of the mta-config package in OSCAR only supports the
>>>> Postfix mail transfer agent (MTA).
>>>> It looks like you have another MTA installed (e.g, sendmail or exim); as
>>>> such,
>>>> please be aware that OSCAR will not automatically configure it.
>>>> ************************************ WARNING
>>>> ************************************
>>>> --> About to run /var/lib/oscar/packages/ntpconfig/api-post-deploy for
>>>> ntpconfig
>>>> Shutting down ntpd: [ OK ]
>>>> Starting ntpd: [ OK ]
>>>> ************************* oscar_cluster *************************
>>>> --------- normnode01---------
>>>> Shutting down ntpd: [ OK ]
>>>> ntpd: Synchronizing with time server: [FAILED]
>>>> Starting ntpd: [ OK ]
>>>> --> About to run /var/lib/oscar/packages/oda/api-post-deploy for oda
>>>> generating the /etc/odaserver file on all oscar clients
>>>> . /etc/profile.d/c3.sh && cexec 'echo oscar_server > /etc/odaserver'
>>>> ************************* oscar_cluster *************************
>>>> --------- normnode01---------
>>>> --> About to run /var/lib/oscar/packages/opium/api-post-deploy for opium
>>>> image:
>>>> $VAR1 = 'fedora-8-x86_64';
>>>> ---------------
>>>> gexec_cluster() XML_ParseBuffer() error at line 1:
>>>> no element found
>>>>
>>>> image:
>>>> $VAR1 = 'fedora-8-x86_64';
>>>> ---------------
>>>> gexec_cluster() XML_ParseBuffer() error at line 1:
>>>> no element found
>>>>
>>>> image:
>>>> $VAR1 = 'fedora-8-x86_64';
>>>> ---------------
>>>> gexec_cluster() XML_ParseBuffer() error at line 1:
>>>> no element found
>>>>
>>>> image:
>>>> $VAR1 = 'fedora-8-x86_64';
>>>> ---------------
>>>> gexec_cluster() XML_ParseBuffer() error at line 1:
>>>> no element found
>>>>
>>>> image:
>>>> $VAR1 = 'fedora-8-x86_64';
>>>> ---------------
>>>> gexec_cluster() XML_ParseBuffer() error at line 1:
>>>> no element found
>>>>
>>>> image:
>>>> $VAR1 = 'fedora-8-x86_64';
>>>> ---------------
>>>> gexec_cluster() XML_ParseBuffer() error at line 1:
>>>> no element found
>>>>
>>>> --> About to run /var/lib/oscar/packages/switcher/api-post-deploy for
>>>> switcher
>>>> Undefined subroutine &package_config::get_packages_switcher called at
>>>> /var/lib/oscar/packages/switcher/package_config.pm line 36.
>>>> --> About to run /var/lib/oscar/packages/torque/api-post-deploy for
>>>> torque
>>>> [torque] Updating pbs_server nodes
>>>> /opt/pbs/bin/pbsnodes: Server has no node list MSG=node list is empty
>>>> qmgr obj=normnode01.gnlserv01 svr=default: Unauthorized Request
>>>> create node normnode01.gnlserv01 np = 2 , properties = all
>>>> Shutting down TORQUE Server: [ OK ]
>>>> Starting TORQUE Server: [ OK ]
>>>> [torque] Creating TORQUE workq queue...
>>>> Max open servers: 4
>>>> qmgr obj=workq svr=default: Unauthorized Request
>>>> create queue workq
>>>> Configuration of TORQUE queues failed, check the logs at /var/spool/pbs
>>>> at /var/lib/oscar/packages/torque/api-post-deploy line 316
>>>> Script /var/lib/oscar/packages/torque/api-post-deploy exitted badly with
>>>> exit code '2' at ./post_install line 49
>>>> Couldn't run 'post_install' script for torque at ./post_install line 50
>>>> Some of the post install scripts failed, please check your logs for more
>>>> info at ./post_install line 55
>>>> --> Step 7: Failed to properly complete the cluster install; please
>>>> check the logs
>>>> --> Update Wizard Env (as needed)
>>>>
>>>>
>>>> :-)
>>>>
>>>> Rion
>>>> --
>>>> "O wretched man that I am! Who will deliver me from this body of death?
>>>> I thank God - through Jesus Christ our Lord! So then, with the mind I
>>>> myself
>>>> serve the law of God, but with the flesh the law of sin." Rom.7:24-25
>>>>
>>>> ------------------------------
>>>>
>>>> ------------------------------------------------------------------------------
>>>> Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
>>>> powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
>>>> easily build your RIAs with Flex Builder, the Eclipse(TM)based development
>>>> software that enables intelligent coding and step-through debugging.
>>>> Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
>>>>
>>>> ------------------------------
>>>>
>>>> _______________________________________________
>>>> Oscar-users mailing
>>>> listoscar-us...@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/oscar-users
>>>>
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------------------------
>>>> Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
>>>> powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
>>>> easily build your RIAs with Flex Builder, the Eclipse(TM)based
>>>> development
>>>> software that enables intelligent coding and step-through debugging.
>>>> Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
>>>> _______________________________________________
>>>> Oscar-users mailing list
>>>> Oscar-users@lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/oscar-users
>>>>
>>>>
>>>
>>>
>>> --
>>> "O wretched man that I am! Who will deliver me from this body of death? I
>>> thank God - through Jesus Christ our Lord! So then, with the mind I myself
>>> serve the law of God, but with the flesh the law of sin." Rom.7:24-25
>>>
>>>
>>> ------------------------------------------------------------------------------
>>> Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
>>> powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
>>> easily build your RIAs with Flex Builder, the Eclipse(TM)based
>>> development
>>> software that enables intelligent coding and step-through debugging.
>>> Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
>>> _______________________________________________
>>> Oscar-users mailing list
>>> Oscar-users@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/oscar-users
>>>
>>>
>>
>>
>> ------------------------------------------------------------------------------
>> Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
>> powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
>> easily build your RIAs with Flex Builder, the Eclipse(TM)based development
>> software that enables intelligent coding and step-through debugging.
>> Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
>> _______________________________________________
>> Oscar-users mailing list
>> Oscar-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/oscar-users
>>
>>
>
>
> --
> "O wretched man that I am! Who will deliver me from this body of death? I
> thank God - through Jesus Christ our Lord! So then, with the mind I myself
> serve the law of God, but with the flesh the law of sin." Rom.7:24-25
>
>
> ------------------------------------------------------------------------------
> Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
> powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
> easily build your RIAs with Flex Builder, the Eclipse(TM)based development
> software that enables intelligent coding and step-through debugging.
> Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
> _______________________________________________
> Oscar-users mailing list
> Oscar-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/oscar-users
>
>
------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
_______________________________________________
Oscar-users mailing list
Oscar-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/oscar-users
