On 24 May 2022, at 12:03, Kumar Amber wrote:
> The mfex pcap generation script is improved for varied length
> traffic and also removes the hard coded mfex_pcap and instead uses
> the script itself to generate complex traffic patterns for testing.
>
> Signed-off-by: Kumar Amber <kumar.am...@intel.com>
> Acked-by: Cian Ferriter <cian.ferri...@intel.com>
>
> ---
> v4:
> - Fix MAC and L4 ports to a value.
> - Generate Ip addresses in fixed range.
> v3:
> - Fix comments(Eelco).
> - Script generates mac/ip/l4_ports in a fixed range.
> v2:
> - Add huge page test-skip.
> - Change core id to 3 to 0 to allow the mfex config test-case
> to run on any system.
> ---
> ---
> tests/automake.mk | 1 -
> tests/mfex_fuzzy.py | 85 +++++++++++++++++++++++++++-----------
> tests/pcap/mfex_test.pcap | Bin 416 -> 0 bytes
> tests/system-dpdk.at | 53 +++++++++++++-----------
> 4 files changed, 92 insertions(+), 47 deletions(-)
> delete mode 100644 tests/pcap/mfex_test.pcap
>
> diff --git a/tests/automake.mk b/tests/automake.mk
> index 34ddda6aa..204e86fac 100644
> --- a/tests/automake.mk
> +++ b/tests/automake.mk
> @@ -146,7 +146,6 @@ $(srcdir)/tests/fuzz-regression-list.at: tests/automake.mk
>
> EXTRA_DIST += $(MFEX_AUTOVALIDATOR_TESTS)
> MFEX_AUTOVALIDATOR_TESTS = \
> - tests/pcap/mfex_test.pcap \
> tests/mfex_fuzzy.py
>
> OVSDB_CLUSTER_TESTSUITE_AT = \
> diff --git a/tests/mfex_fuzzy.py b/tests/mfex_fuzzy.py
> index 3efe1152d..b4f8796b4 100755
> --- a/tests/mfex_fuzzy.py
> +++ b/tests/mfex_fuzzy.py
> @@ -3,30 +3,69 @@
> import sys
>
> from scapy.all import RandMAC, RandIP, PcapWriter, RandIP6, RandShort, fuzz
> -from scapy.all import IPv6, Dot1Q, IP, Ether, UDP, TCP
> +from scapy.all import IPv6, Dot1Q, IP, Ether, UDP, TCP, random
>
> +# Relative path for the pcap file location.
> path = str(sys.argv[1]) + "/pcap/fuzzy.pcap"
> +# The number of packets generated will be size * 8.
> +size = int(sys.argv[2])
> +# Traffic option is used to choose between fuzzy or simple packet type.
> +if (len(sys.argv) > 3):
> + traffic_opt = str(sys.argv[3])
> +else:
> + traffic_opt = ""
> +
> pktdump = PcapWriter(path, append=False, sync=True)
>
> -for i in range(0, 2000):
> -
> - # Generate random protocol bases, use a fuzz() over the combined packet
> - # for full fuzzing.
> - eth = Ether(src=RandMAC(), dst=RandMAC())
> - vlan = Dot1Q()
> - ipv4 = IP(src=RandIP(), dst=RandIP())
> - ipv6 = IPv6(src=RandIP6(), dst=RandIP6())
> - udp = UDP(dport=RandShort(), sport=RandShort())
> - tcp = TCP(dport=RandShort(), sport=RandShort())
> -
> - # IPv4 packets with fuzzing
> - pktdump.write(fuzz(eth / ipv4 / udp))
> - pktdump.write(fuzz(eth / ipv4 / tcp))
> - pktdump.write(fuzz(eth / vlan / ipv4 / udp))
> - pktdump.write(fuzz(eth / vlan / ipv4 / tcp))
> -
> - # IPv6 packets with fuzzing
> - pktdump.write(fuzz(eth / ipv6 / udp))
> - pktdump.write(fuzz(eth / ipv6 / tcp))
> - pktdump.write(fuzz(eth / vlan / ipv6 / udp))
> - pktdump.write(fuzz(eth / vlan / ipv6 / tcp))
> +pkt = []
> +
> +for i in range(0, size):
> + if traffic_opt == "fuzzy":
> +
> + eth = Ether(src=RandMAC(), dst=RandMAC())
> + vlan = Dot1Q()
> + udp = UDP(dport=RandShort(), sport=RandShort())
> + ipv4 = IP(src=RandIP(), dst=RandIP(), len=random.randint(0, 100))
> + ipv6 = IPv6(src=RandIP6(), dst=RandIP6(), plen=random.randint(0,
> 100))
> + tcp = TCP(dport=RandShort(), sport=RandShort(), flags='S',
> + dataofs=random.randint(0, 15))
> +
> + # IPv4 packets with fuzzing
> + pkt.append(fuzz(eth / ipv4 / udp))
> + pkt.append(fuzz(eth / ipv4 / tcp))
> + pkt.append(fuzz(eth / vlan / ipv4 / udp))
> + pkt.append(fuzz(eth / vlan / ipv4 / tcp))
> +
> + # IPv6 packets with fuzzing
> + pkt.append(fuzz(eth / ipv6 / udp))
> + pkt.append(fuzz(eth / ipv6 / tcp))
> + pkt.append(fuzz(eth / vlan / ipv6 / udp))
> + pkt.append(fuzz(eth / vlan / ipv6 / tcp))
> +
> + else:
> + mac_addr = "52:54:00:FF:FF:FF"
> + src_port = 200
> + dst_port = 1000
So you no longer want the ports and MAC to be a range as I suggested?
> + eth = Ether(src=mac_addr, dst=mac_addr)
Now you also have the source and destination MAC the same, is this on purpose?
> + vlan = Dot1Q(vlan=(i % 10))
> + udp = UDP(dport=src_port, sport=dst_port)
> + # IPv4 address range limits to 255
, and IPv6 limit to 65535.
> + ipv4_addr = "192.168.150." + str((i % 255))
> + ipv6_addr = "2001:0db8:85a3:0000:0000:8a2e:0370:" + str(i % 0xffff)
You missed my previous comment, this need to be a hex value with leading zeros.
Guess you could use "2001:0db8:85a3:0000:0000:8a2e:0370:{:04x}”.format(i %
0xffff) here (please verify ;)
> + ipv4 = IP(src=ipv4_addr, dst=ipv4_addr)
> + ipv6 = IPv6(src=ipv6_addr, dst=ipv6_addr)
Here also you use the same source and destination IP, is this on purpose? If so
I’m ok, but a different src/dst makes more sense.
> + tcp = TCP(dport=src_port, sport=dst_port, flags='S')
> +
> + # IPv4 packets
> + pkt.append(eth / ipv4 / udp)
> + pkt.append(eth / ipv4 / tcp)
> + pkt.append(eth / vlan / ipv4 / udp)
> + pkt.append(eth / vlan / ipv4 / tcp)
> +
> + # IPv6 packets
> + pkt.append(eth / ipv6 / udp)
> + pkt.append(eth / ipv6 / tcp)
> + pkt.append(eth / vlan / ipv6 / udp)
> + pkt.append(eth / vlan / ipv6 / tcp)
> +
> +pktdump.write(pkt)
> diff --git a/tests/pcap/mfex_test.pcap b/tests/pcap/mfex_test.pcap
> deleted file mode 100644
> index
> 1aac67b8d643ecb016c758cba4cc32212a80f52a..0000000000000000000000000000000000000000
> GIT binary patch
> literal 0
> HcmV?d00001
>
> literal 416
> zcmca|c+)~A1{MYw`2U}Qff2}Q<eHVR>K`M68ITRa|G@yFii5$Gfk6YL%z>@uY&}o|
> z2s4N<1VH2&7y^V87$)XGOtD~MV$cFgfG~zBGGJ2#YtF$<F=a4i;9x8Q*<ZrSM6Ufz
> xK>KST_NTIwYriok6N4Vm)gX-Q@<yO<!C`>c^{cp<7_5LgK^UuU{2>VS0RZ!RQ+EIW
>
> diff --git a/tests/system-dpdk.at b/tests/system-dpdk.at
> index 7d2715c4a..ac83e5a57 100644
> --- a/tests/system-dpdk.at
> +++ b/tests/system-dpdk.at
> @@ -226,17 +226,19 @@ dnl
> --------------------------------------------------------------------------
> dnl Add standard DPDK PHY port
> AT_SETUP([OVS-DPDK - MFEX Autovalidator])
> AT_KEYWORDS([dpdk])
> -
> +OVS_DPDK_PRE_CHECK()
> OVS_DPDK_START()
> -
> -dnl Add userspace bridge and attach it to OVS
> AT_CHECK([ovs-vsctl add-br br0 -- set bridge br0 datapath_type=netdev])
> -AT_CHECK([ovs-vsctl add-port br0 p1 -- set Interface p1 type=dpdk
> options:dpdk-devargs=net_pcap1,rx_pcap=$srcdir/pcap/mfex_test.pcap,infinite_rx=1],
> [], [stdout], [stderr])
> -AT_CHECK([ovs-vsctl show], [], [stdout])
> -
> AT_SKIP_IF([! ovs-appctl dpif-netdev/miniflow-parser-get | sed 1,4d | grep
> "True"], [], [dnl
> ])
>
> +AT_SKIP_IF([! $PYTHON3 -c "import scapy"], [], [])
> +AT_CHECK([$PYTHON3 $srcdir/mfex_fuzzy.py $srcdir 2000], [], [stdout])
> +
> +dnl Add userspace bridge and attach it to OVS
> +AT_CHECK([ovs-vsctl add-port br0 p1 -- set Interface p1 type=dpdk
> options:dpdk-devargs=net_pcap1,rx_pcap=$srcdir/pcap/fuzzy.pcap,infinite_rx=1],
> [], [stdout], [stderr])
> +AT_CHECK([ovs-vsctl show], [], [stdout])
> +
> AT_CHECK([ovs-appctl dpif-netdev/dpif-impl-set dpif_avx512], [0], [dnl
> DPIF implementation set to dpif_avx512.
> ])
> @@ -245,11 +247,12 @@ AT_CHECK([ovs-appctl dpif-netdev/miniflow-parser-set
> autovalidator], [0], [dnl
> Miniflow extract implementation set to autovalidator.
> ])
>
> -OVS_WAIT_UNTIL([test `ovs-vsctl get interface p1 statistics | grep -oP
> 'rx_packets=\s*\K\d+'` -ge 1000])
> +OVS_WAIT_UNTIL([test `ovs-vsctl get interface p1 statistics | grep -oP
> 'rx_packets=\s*\K\d+'` -ge 16000])
>
> dnl Clean up
> AT_CHECK([ovs-vsctl del-port br0 p1], [], [stdout], [stderr])
> -OVS_VSWITCHD_STOP("[SYSTEM_DPDK_ALLOWED_LOGS]")
> +OVS_VSWITCHD_STOP("m4_join([], [SYSTEM_DPDK_ALLOWED_LOGS], [
> +])")
> AT_CLEANUP
> dnl
> --------------------------------------------------------------------------
>
> @@ -257,18 +260,19 @@ dnl
> --------------------------------------------------------------------------
> dnl Add standard DPDK PHY port
> AT_SETUP([OVS-DPDK - MFEX Autovalidator Fuzzy])
> AT_KEYWORDS([dpdk])
> -AT_SKIP_IF([! $PYTHON3 -c "import scapy"], [], [])
> -AT_CHECK([$PYTHON3 $srcdir/mfex_fuzzy.py $srcdir], [], [stdout])
> +OVS_DPDK_PRE_CHECK()
> OVS_DPDK_START()
> +AT_CHECK([ovs-vsctl add-br br0 -- set bridge br0 datapath_type=netdev])
> +AT_SKIP_IF([! ovs-appctl dpif-netdev/miniflow-parser-get | sed 1,4d | grep
> "True"], [], [dnl
> +])
> +
> +AT_SKIP_IF([! $PYTHON3 -c "import scapy"], [], [])
> +AT_CHECK([$PYTHON3 $srcdir/mfex_fuzzy.py $srcdir 2000 fuzzy], [], [stdout])
>
> dnl Add userspace bridge and attach it to OVS
> -AT_CHECK([ovs-vsctl add-br br0 -- set bridge br0 datapath_type=netdev])
> AT_CHECK([ovs-vsctl add-port br0 p1 -- set Interface p1 type=dpdk
> options:dpdk-devargs=net_pcap1,rx_pcap=$srcdir/pcap/fuzzy.pcap,infinite_rx=1],
> [], [stdout], [stderr])
> AT_CHECK([ovs-vsctl show], [], [stdout])
>
> -AT_SKIP_IF([! ovs-appctl dpif-netdev/miniflow-parser-get | sed 1,4d | grep
> "True"], [], [dnl
> -])
> -
> AT_CHECK([ovs-appctl dpif-netdev/dpif-impl-set dpif_avx512], [0], [dnl
> DPIF implementation set to dpif_avx512.
> ])
> @@ -277,7 +281,7 @@ AT_CHECK([ovs-appctl dpif-netdev/miniflow-parser-set
> autovalidator], [0], [dnl
> Miniflow extract implementation set to autovalidator.
> ])
>
> -OVS_WAIT_UNTIL([test `ovs-vsctl get interface p1 statistics | grep -oP
> 'rx_packets=\s*\K\d+'` -ge 100000])
> +OVS_WAIT_UNTIL([test `ovs-vsctl get interface p1 statistics | grep -oP
> 'rx_packets=\s*\K\d+'` -ge 16000])
>
> dnl Clean up
> AT_CHECK([ovs-vsctl del-port br0 p1], [], [stdout], [stderr])
> @@ -290,11 +294,14 @@ dnl
> --------------------------------------------------------------------------
> dnl
> --------------------------------------------------------------------------
> AT_SETUP([OVS-DPDK - MFEX Configuration])
> AT_KEYWORDS([dpdk])
> +OVS_DPDK_PRE_CHECK()
> +AT_SKIP_IF([! $PYTHON3 -c "import scapy"], [], [])
> +AT_CHECK([$PYTHON3 $srcdir/mfex_fuzzy.py $srcdir 1], [], [stdout])
> OVS_DPDK_START()
> -AT_CHECK([ovs-vsctl --no-wait set Open_vSwitch .
> other_config:pmd-cpu-mask=0xC])
> +AT_CHECK([ovs-vsctl --no-wait set Open_vSwitch .
> other_config:pmd-cpu-mask=0x1])
> dnl Add userspace bridge and attach it to OVS
> AT_CHECK([ovs-vsctl add-br br0 -- set bridge br0 datapath_type=netdev])
> -AT_CHECK([ovs-vsctl add-port br0 p1 -- set Interface p1 type=dpdk
> options:dpdk-devargs=net_pcap1,rx_pcap=$srcdir/pcap/mfex_test.pcap,infinite_rx=1],
> [], [stdout], [stderr])
> +AT_CHECK([ovs-vsctl add-port br0 p1 -- set Interface p1 type=dpdk
> options:dpdk-devargs=net_pcap1,rx_pcap=$srcdir/pcap/fuzzy.pcap,infinite_rx=1],
> [], [stdout], [stderr])
> AT_CHECK([ovs-vsctl show], [], [stdout])
>
> AT_CHECK([ovs-appctl dpif-netdev/miniflow-parser-set scalar 1], [2],
> @@ -339,12 +346,12 @@ Error: invalid study_pkt_cnt value: abcd.
> ovs-appctl: ovs-vswitchd: server returned an error
> ])
>
> -AT_CHECK([ovs-appctl dpif-netdev/miniflow-parser-set -pmd 3 study], [0], [dnl
> -Miniflow extract implementation set to study, on pmd thread 3, studying 128
> packets.
> +AT_CHECK([ovs-appctl dpif-netdev/miniflow-parser-set -pmd 0 study], [0], [dnl
> +Miniflow extract implementation set to study, on pmd thread 0, studying 128
> packets.
> ])
>
> -AT_CHECK([ovs-appctl dpif-netdev/miniflow-parser-set -pmd 3 study 512], [0],
> [dnl
> -Miniflow extract implementation set to study, on pmd thread 3, studying 512
> packets.
> +AT_CHECK([ovs-appctl dpif-netdev/miniflow-parser-set -pmd 0 study 512], [0],
> [dnl
> +Miniflow extract implementation set to study, on pmd thread 0, studying 512
> packets.
> ])
>
> AT_CHECK([ovs-appctl dpif-netdev/miniflow-parser-set study 512], [0], [dnl
> @@ -355,8 +362,8 @@ AT_CHECK([ovs-appctl dpif-netdev/miniflow-parser-set
> study], [0], [dnl
> Miniflow extract implementation set to study, studying 128 packets.
> ])
>
> -AT_CHECK([ovs-appctl dpif-netdev/miniflow-parser-set -pmd 3 autovalidator],
> [0], [dnl
> -Miniflow extract implementation set to autovalidator, on pmd thread 3.
> +AT_CHECK([ovs-appctl dpif-netdev/miniflow-parser-set -pmd 0 autovalidator],
> [0], [dnl
> +Miniflow extract implementation set to autovalidator, on pmd thread 0.
> ])
>
> AT_CHECK([ovs-appctl dpif-netdev/miniflow-parser-set -pmd zero study], [2],
> --
> 2.25.1
_______________________________________________
dev mailing list
d...@openvswitch.org
https://mail.openvswitch.org/mailman/listinfo/ovs-dev
