Hi!

I've been using owfs on my wl500g Deluxe stable for ~4weeks, and yes
it is mainly DS2438
on my bus, parasitic powered, and it's been working flawlessly for
those ~4 weeks.

Mainly ibuttonlink's , but as off now when i'm testing i've hooked off
all except from one sensor. didn't help much.

will try loading the ohci module, doubt that will change anyuthing,
but it's theone of the few things i havent tried :-)

Thanks for the lsmod



On 6/26/06, Vincent Fleming <[EMAIL PROTECTED]> wrote:
> Hmm...
>
> Here's my module listing:
>
> [EMAIL PROTECTED]:/# lsmod
> Module                  Size  Used by    Tainted: P
> fuse                   30112   0
> ehci-hcd               20140   0 (unused)
> usb-storage            65216   0 (unused)
> sd_mod                 12500   0 (unused)
> scsi_mod               70248   1 [usb-storage sd_mod]
> usb-ohci               19252   0 (unused)
> usbcore                74632   1 [ehci-hcd usb-storage usb-ohci]
> vfat                   11692   0 (unused)
> fat                    36856   0 [vfat]
> nfs                    90296   0 (unused)
> lockd                  64060   0 [nfs]
> sunrpc                 81512   0 [nfs lockd]
> ext3                   72788   0 (unused)
> jbd                    54872   0 [ext3]
> ext2                   41496   0 (unused)
> switch-robo             4604   0 (unused)
> switch-core             4832   0 [switch-robo]
>
> It might vary a little from yours, but note the ehci-hcd, usb-ohci, and 
> usbcore.  Those should be there for you.
>
> I see others on http://forum.openwrt.org/ that seem to be doing similar 
> things as you.  You should check if there are any answers from there.
>
> Good luck, and don't throw anything yet... ;-)
>
> -Vince
>
>
>
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:owfs-
> > [EMAIL PROTECTED] On Behalf Of Kurt André Selbach
> > Sent: Monday, June 26, 2006 3:19 PM
> > To: [email protected]
> > Subject: Re: [Owfs-developers] OWFS openwrt - Asus deluxe/premium
> >
> > No
> >
> > i'm staying as you said away from 2.6 on my embedded devices.
> > This is from 2.4.32 kernel.
> >
> > Still having issues, managed to get it working for some seconds before
> > i get the fuse "write error" or something similaer.
> >
> > Trying your image now, but i had to install the ipkg's (owfs not on
> > after new flash) but seems to be same issues. but i havent given up
> > just yet.
> >
> > But i'm starting to get mad :-) and it's just seconds before i buy a
> > ITX soloution and throw my routers out the window in the direction of
> > the freeway :-)
> >
> > Have a nice day,
> > Best regards
> >
> > On 6/26/06, Vincent Fleming <[EMAIL PROTECTED]> wrote:
> > > Is it a 2.6 kernel?  The dmesg shows a usb error message similar to what
> > I've seen with 2.6.
> > >
> > > > -----Original Message-----
> > > > From: [EMAIL PROTECTED] [mailto:owfs-
> > > > [EMAIL PROTECTED] On Behalf Of Kurt André
> > Selbach
> > > > Sent: Monday, June 26, 2006 12:37 PM
> > > > To: [email protected]
> > > > Subject: Re: [Owfs-developers] OWFS openwrt - Asus deluxe/premium
> > > >
> > > > This is with kernel on my own,
> > > > havent tested yours yet.
> > > >
> > > > Might do it soon, let's hope it doesnt brick :-)
> > > >
> > > >
> > > > On 6/26/06, Vincent Fleming <[EMAIL PROTECTED]> wrote:
> > > > > Are you using my system image & kernel or your own?
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: [EMAIL PROTECTED] [mailto:owfs-
> > > > > > [EMAIL PROTECTED] On Behalf Of Kurt André
> > > > Selbach
> > > > > > Sent: Monday, June 26, 2006 11:59 AM
> > > > > > To: [email protected]
> > > > > > Subject: Re: [Owfs-developers] OWFS openwrt - Asus deluxe/premium
> > > > > >
> > > > > > ok i think i managed to compile everything as it should, but now i
> > > > > > have these errors:
> > > > > >
> > > > > > [EMAIL PROTECTED]:~# owfs -u /tmp/wire --error-level 3 --foreground
> > > > > > CONNECT: fuse mount point: /tmp/wire
> > > > > >    CALL: PARSENAME path=[]
> > > > > > CONNECT: Adapter found: 001/004
> > > > > > DEFAULT: Opened USB DS9490 adapter at 001/004.
> > > > > > DEFAULT: Error setting up USB DS9490 adapter at 001/004.
> > > > > > unique: 1, opcode: INIT (26), nodeid: 0, insize: 56
> > > > > > INIT: 7.6
> > > > > > flags=0x00000000
> > > > > > max_readahead=0x00000000
> > > > > >    INIT: 7.6
> > > > > >    flags=0x00000000
> > > > > >    max_readahead=0x00000000
> > > > > >    max_write=0x00020000
> > > > > >    unique: 1, error: 0 (Success), outsize: 40
> > > > > > unique: 2, opcode: GETATTR (3), nodeid: 1, insize: 40
> > > > > >    CALL: FSTAT path=/
> > > > > >    CALL: PARSENAME path=[/]
> > > > > >    CALL: ATTRIBUTES path=/
> > > > > >    unique: 2, error: 0 (Success), outsize: 112
> > > > > > fuse: writing device: Invalid argument
> > > > > >
> > > > > > dmesg gives this:
> > > > > >
> > > > > > fuse init (API version 7.6)
> > > > > > fuse distribution version: 2.6.0-pre2
> > > > > > usbdevfs: usb_submit_urb returned -22
> > > > > >
> > > > > > [EMAIL PROTECTED]:~# lsmod
> > > > > > Module                  Size  Used by
> > > > > > fuse                   30112   2
> > > > > >
> > > > > > [EMAIL PROTECTED]:~# fusermount --version
> > > > > > fusermount version: 2.6.0-pre2
> > > > > > [EMAIL PROTECTED]:~# owfs --version
> > > > > > owfs version:
> > > > > >         2.3p7
> > > > > > libow version:
> > > > > >         2.3p7
> > > > > >
> > > > > >
> > > > > > Any ideas
> > > > > >
> > > > > >
> > > > > > On 6/26/06, Vincent Fleming <[EMAIL PROTECTED]> wrote:
> > > > > > > Make sure you make fuse first, then make owfs.
> > > > > > >
> > > > > > > To compile, I use the command "make package/fuse-compile" then
> > "make
> > > > > > package/owfs-compile".
> > > > > > >
> > > > > > > Do a "make clean" before you start - you want owfs to
> > "./configure"
> > > > > > AFTER fuse is built, so it will recognize that libfuse is
> > statically
> > > > > > linked (ie: it will use libfuse.a rather than libfuse.so)
> > > > > > >
> > > > > > > You can easily make clean with "make package/fuse-clean" and
> > "make
> > > > > > package/owfs-clean".\, but you may want to "make clean" from the
> > base
> > > > > > directory, and rebuild everything. (the safest).
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: [EMAIL PROTECTED]
> > [mailto:owfs-
> > > > > > > > [EMAIL PROTECTED] On Behalf Of Kurt
> > André
> > > > > > Selbach
> > > > > > > > Sent: Monday, June 26, 2006 5:52 AM
> > > > > > > > To: [email protected]
> > > > > > > > Subject: Re: [Owfs-developers] OWFS openwrt - Asus
> > deluxe/premium
> > > > > > > >
> > > > > > > > [EMAIL PROTECTED]:/# owfs -u /tmp/1wire
> > > > > > > > owfs: can't load library 'libfuse.so.2'
> > > > > > > >
> > > > > > > > [EMAIL PROTECTED]:/# fusermount --version
> > > > > > > > fusermount version: 2.6.0-pre2
> > > > > > > >
> > > > > > > > What is wrong?
> > > > > > > > What exact steps did you do?
> > > > > > > > i create the package/owfs
> > > > > > > > insert the makefile, and how do i compile it?
> > > > > > > >
> > > > > > > > but since i have the whole branch downloaded, how di you do
> > it?
> > > > > > > > feel free to send me the ipkg's (owfs, and fuse)
> > > > > > > >
> > > > > > > >
> > > > > > > > ...via the SDK i think the step should be: make owfs-compile
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > On 6/26/06, Kurt André Selbach <[EMAIL PROTECTED]> wrote:
> > > > > > > > > Do you happen to have a jff2-4mb binary file i could
> > "borrow"?
> > > > > > > > >
> > > > > > > > > On 6/26/06, Vincent Fleming <[EMAIL PROTECTED]> wrote:
> > > > > > > > > > Andre,
> > > > > > > > > >
> > > > > > > > > > I didn't use the SDK - I build the whole system (kernel
> > and
> > > > all)
> > > > > > from
> > > > > > > > sources.  The SDK should work just as well.
> > > > > > > > > >
> > > > > > > > > > I don't know what SVN version I used... it was current
> > when I
> > > > last
> > > > > > > > compiled on 22 May 2006.  I'm unfamiliar with SVN, and I'm not
> > > > sure
> > > > > > how to
> > > > > > > > check.
> > > > > > > > > > (it works like magic!)  ;-)
> > > > > > > > > >
> > > > > > > > > > ...
> > > > > > > > > >
> > > > > > > > > > "svn info" seems to report that I have revision 3722 of
> > > > openwrt,
> > > > > > dated
> > > > > > > > 1 May 2006.
> > > > > > > > > >
> > > > > > > > > > Regards (from New Jersey, USA ;-),
> > > > > > > > > >
> > > > > > > > > > Vince
> > > > > > > > > >
> > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > From: [EMAIL PROTECTED]
> > > > > > [mailto:owfs-
> > > > > > > > > > > [EMAIL PROTECTED] On Behalf Of
> > Kurt
> > > > > > André
> > > > > > > > Selbach
> > > > > > > > > > > Sent: Sunday, June 25, 2006 9:50 PM
> > > > > > > > > > > To: [email protected]
> > > > > > > > > > > Subject: Re: [Owfs-developers] OWFS openwrt - Asus
> > > > > > deluxe/premium
> > > > > > > > > > >
> > > > > > > > > > > Thanks!
> > > > > > > > > > >
> > > > > > > > > > > Your a saving angel, going to take a look at it right
> > away
> > > > when
> > > > > > i
> > > > > > > > come
> > > > > > > > > > > home from work in a couple of hours.
> > > > > > > > > > >
> > > > > > > > > > > Skipping 2.6 kernel then, and going for 2.4 kamikaze.
> > > > > > > > > > >
> > > > > > > > > > > What SVN version of kamikaze  "SDK" did you use?
> > > > > > > > > > >
> > > > > > > > > > > Thanks!
> > > > > > > > > > >
> > > > > > > > > > > Best Regards, from norway :-)
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > On 6/26/06, Vincent Fleming <[EMAIL PROTECTED]> wrote:
> > > > > > > > > > > > Andre,
> > > > > > > > > > > >
> > > > > > > > > > > > I've ported owfs 2.3p7 to Openwrt kamikaze.
> > > > > > > > > > > >
> > > > > > > > > > > > I found it requires fuse v2.6.0-pre2, which is not
> > part of
> > > > the
> > > > > > > > standard
> > > > > > > > > > > Openwrt distribution.
> > > > > > > > > > > >
> > > > > > > > > > > > Your problem sounds like one of the problems I ran
> > into...
> > > > the
> > > > > > > > dynamic
> > > > > > > > > > > linker seems to be broken in kamizaze, so you'll need to
> > > > > > statically
> > > > > > > > link
> > > > > > > > > > > owfs.  So, once I statically linked owfs, the fusermount
> > > > errors
> > > > > > went
> > > > > > > > away.
> > > > > > > > > > > >
> > > > > > > > > > > > The problem has to do with the use of .asm()
> > directives in
> > > > the
> > > > > > > > fuse code
> > > > > > > > > > > to support dynamic linking to different (legacy)
> > versions of
> > > > > > fuse
> > > > > > > > from the
> > > > > > > > > > > same library. (I could type for days telling you what I
> > went
> > > > > > through
> > > > > > > > to
> > > > > > > > > > > debug this, but that's pretty irreverent now... ;-))
> > > > > > > > > > > >
> > > > > > > > > > > > I've attached the makefiles I wrote for package/fuse
> > and
> > > > > > > > package/owfs,
> > > > > > > > > > > and patches I needed for fuse.  If you get compile
> > errors on
> > > > > > fuse,
> > > > > > > > try the
> > > > > > > > > > > patches in package/fuse/patches.  These Makefiles should
> > set
> > > > you
> > > > > > up
> > > > > > > > nicely
> > > > > > > > > > > with a statically linked version of owfs for kamikaze.
> > > > > > > > > > > >
> > > > > > > > > > > > As a side note, I had data error problems with the USB
> > > > drivers
> > > > > > in
> > > > > > > > the
> > > > > > > > > > > 2.6 kernel - to owfs, it appeared that devices came and
> > went.
> > > > > > > > Kamikaze
> > > > > > > > > > > with the 2.4 kernel works perfectly.  I haven't had the
> > time
> > > > to
> > > > > > > > figure out
> > > > > > > > > > > why (I spent enough time debugging already), and I don't
> > > > really
> > > > > > need
> > > > > > > > a 2.6
> > > > > > > > > > > kernel anyway, so I haven't debugged it further once
> > finding
> > > > I
> > > > > > was
> > > > > > > > getting
> > > > > > > > > > > heaps of CRC errors in owfs.  It could be related to my
> > > > > > particular
> > > > > > > > > > > hardware platform (netgear WGT), so your mileage may
> > > > vary.  ;-)
> > > > > > > > > > > >
> > > > > > > > > > > > But, again, the 2.4 kernel works just great.
> > > > > > > > > > > >
> > > > > > > > > > > > That's about all I can think of...  good luck!  Let us
> > > > know
> > > > > > how
> > > > > > > > you make
> > > > > > > > > > > out.
> > > > > > > > > > > >
> > > > > > > > > > > > I hope this helps,
> > > > > > > > > > > >
> > > > > > > > > > > > Vince
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > > > From: [EMAIL PROTECTED]
> > > > > > > > [mailto:owfs-
> > > > > > > > > > > > > [EMAIL PROTECTED] On Behalf
> > Of
> > > > Kurt
> > > > > > > > André
> > > > > > > > > > > Selbach
> > > > > > > > > > > > > Sent: Sunday, June 25, 2006 9:24 AM
> > > > > > > > > > > > > To: [email protected]
> > > > > > > > > > > > > Subject: [Owfs-developers] OWFS openwrt - Asus
> > > > > > deluxe/permium
> > > > > > > > > > > > >
> > > > > > > > > > > > > owfs on openwrt,(wl500gDeluxe)
> > > > > > > > > > > > >
> > > > > > > > > > > > > Hi i've had this running quite stable for ~3-4 weeks
> > now,
> > > > > > but
> > > > > > > > > > > > > since misterhouse was running quite slow on the
> > wl500gD
> > > > > > (haven't
> > > > > > > > > > > > > figured the issue yet) i bought the wl500gP which i
> > > > can't
> > > > > > get
> > > > > > > > owfs
> > > > > > > > > > > > > running on.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Anyone experimented with this, tried whiterussian
> > RC5
> > > > and
> > > > > > the
> > > > > > > > newest
> > > > > > > > > > > > > branch (kamikaze) but when i install the newest
> > branch i
> > > > get
> > > > > > all
> > > > > > > > kinds
> > > > > > > > > > > > > of fuse invalid argument errors.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Anyway i can get more debug information from the
> > line
> > > > owfs
> > > > > > is
> > > > > > > > sending
> > > > > > > > > > > > > to fusermount?
> > > > > > > > > > > > >
> > > > > > > > > > > > > Chistian i can't find the source for your newest
> > > > compiles on
> > > > > > > > your
> > > > > > > > > > > > > homepages, i'd like to see if thing is better on the
> > > > > > kamikazee
> > > > > > > > kernel
> > > > > > > > > > > > > 2.6 branch. with working ehci.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Have a nice evening/morning.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Using Tomcat but need to do more? Need to support
> > web
> > > > > > services,
> > > > > > > > > > > security?
> > > > > > > > > > > > > Get stuff done quickly with pre-integrated
> > technology to
> > > > > > make
> > > > > > > > your job
> > > > > > > > > > > > > easier
> > > > > > > > > > > > > Download IBM WebSphere Application Server v.1.0.1
> > based
> > > > on
> > > > > > > > Apache
> > > > > > > > > > > Geronimo
> > > > > > > > > > > > > http://sel.as-
> > > > > > > > > > >
> > us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> > > > > > > > > > > > > _______________________________________________
> > > > > > > > > > > > > Owfs-developers mailing list
> > > > > > > > > > > > > [email protected]
> > > > > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/owfs-
> > > > developers
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > Using Tomcat but need to do more? Need to support web
> > > > services,
> > > > > > > > > > > security?
> > > > > > > > > > > > Get stuff done quickly with pre-integrated technology
> > to
> > > > make
> > > > > > your
> > > > > > > > job
> > > > > > > > > > > easier
> > > > > > > > > > > > Download IBM WebSphere Application Server v.1.0.1
> > based on
> > > > > > Apache
> > > > > > > > > > > Geronimo
> > > > > > > > > > > > http://sel.as-
> > > > > > > > us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> > > > > > > > > > > >
> > > > > > > > > > > > _______________________________________________
> > > > > > > > > > > > Owfs-developers mailing list
> > > > > > > > > > > > [email protected]
> > > > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/owfs-
> > > > developers
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Using Tomcat but need to do more? Need to support web
> > > > services,
> > > > > > > > security?
> > > > > > > > > > > Get stuff done quickly with pre-integrated technology to
> > > > make
> > > > > > your
> > > > > > > > job
> > > > > > > > > > > easier
> > > > > > > > > > > Download IBM WebSphere Application Server v.1.0.1 based
> > on
> > > > > > Apache
> > > > > > > > Geronimo
> > > > > > > > > > > http://sel.as-
> > > > > > > > us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> > > > > > > > > > > _______________________________________________
> > > > > > > > > > > Owfs-developers mailing list
> > > > > > > > > > > [email protected]
> > > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/owfs-
> > developers
> > > > > > > > > >
> > > > > > > > > > Using Tomcat but need to do more? Need to support web
> > services,
> > > > > > > > security?
> > > > > > > > > > Get stuff done quickly with pre-integrated technology to
> > make
> > > > your
> > > > > > job
> > > > > > > > easier
> > > > > > > > > > Download IBM WebSphere Application Server v.1.0.1 based on
> > > > Apache
> > > > > > > > Geronimo
> > > > > > > > > > http://sel.as-
> > > > > > > > us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> > > > > > > > > > _______________________________________________
> > > > > > > > > > Owfs-developers mailing list
> > > > > > > > > > [email protected]
> > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/owfs-
> > developers
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > > Using Tomcat but need to do more? Need to support web services,
> > > > > > security?
> > > > > > > > Get stuff done quickly with pre-integrated technology to make
> > your
> > > > job
> > > > > > > > easier
> > > > > > > > Download IBM WebSphere Application Server v.1.0.1 based on
> > Apache
> > > > > > Geronimo
> > > > > > > > http://sel.as-
> > > > > > us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> > > > > > > > _______________________________________________
> > > > > > > > Owfs-developers mailing list
> > > > > > > > [email protected]
> > > > > > > > https://lists.sourceforge.net/lists/listinfo/owfs-developers
> > > > > > >
> > > > > > > Using Tomcat but need to do more? Need to support web services,
> > > > > > security?
> > > > > > > Get stuff done quickly with pre-integrated technology to make
> > your
> > > > job
> > > > > > easier
> > > > > > > Download IBM WebSphere Application Server v.1.0.1 based on
> > Apache
> > > > > > Geronimo
> > > > > > > http://sel.as-
> > > > us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> > > > > > > _______________________________________________
> > > > > > > Owfs-developers mailing list
> > > > > > > [email protected]
> > > > > > > https://lists.sourceforge.net/lists/listinfo/owfs-developers
> > > > > > >
> > > > > >
> > > > > > Using Tomcat but need to do more? Need to support web services,
> > > > security?
> > > > > > Get stuff done quickly with pre-integrated technology to make your
> > job
> > > > > > easier
> > > > > > Download IBM WebSphere Application Server v.1.0.1 based on Apache
> > > > Geronimo
> > > > > > http://sel.as-
> > > > us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> > > > > > _______________________________________________
> > > > > > Owfs-developers mailing list
> > > > > > [email protected]
> > > > > > https://lists.sourceforge.net/lists/listinfo/owfs-developers
> > > > >
> > > > > Using Tomcat but need to do more? Need to support web services,
> > > > security?
> > > > > Get stuff done quickly with pre-integrated technology to make your
> > job
> > > > easier
> > > > > Download IBM WebSphere Application Server v.1.0.1 based on Apache
> > > > Geronimo
> > > > > http://sel.as-
> > us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> > > > > _______________________________________________
> > > > > Owfs-developers mailing list
> > > > > [email protected]
> > > > > https://lists.sourceforge.net/lists/listinfo/owfs-developers
> > > > >
> > > >
> > > > Using Tomcat but need to do more? Need to support web services,
> > security?
> > > > Get stuff done quickly with pre-integrated technology to make your job
> > > > easier
> > > > Download IBM WebSphere Application Server v.1.0.1 based on Apache
> > Geronimo
> > > > http://sel.as-
> > us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> > > > _______________________________________________
> > > > Owfs-developers mailing list
> > > > [email protected]
> > > > https://lists.sourceforge.net/lists/listinfo/owfs-developers
> > >
> > > Using Tomcat but need to do more? Need to support web services,
> > security?
> > > Get stuff done quickly with pre-integrated technology to make your job
> > easier
> > > Download IBM WebSphere Application Server v.1.0.1 based on Apache
> > Geronimo
> > > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> > > _______________________________________________
> > > Owfs-developers mailing list
> > > [email protected]
> > > https://lists.sourceforge.net/lists/listinfo/owfs-developers
> > >
> >
> > Using Tomcat but need to do more? Need to support web services, security?
> > Get stuff done quickly with pre-integrated technology to make your job
> > easier
> > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> > _______________________________________________
> > Owfs-developers mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/owfs-developers
>
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Owfs-developers mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>

Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers

Reply via email to