Hi I wonder if anyone can help.
I'm running OWFS ver 2.7p32 on a Raspberry Pi. Using a LinkUSB device, I've been successfully monitoring a couple of temp sensors for months. Ages ago I bought a Hobbyboards 6 channel hub, but have only just got round to using it. If I connect my LinkUSB to the IN terminal, and my existing 1-wire bus to the OUT ie just pass-through) it all continues to work fine. I can see my existing temp sensors and the 3 x DS2409 devices of the hub. But if I connect my bus to one of the hub branches - eg Channel 1 main, then nothing happens. No sign of my temp devices anywhere below the DS2409 main or aux directories. If cat "branch.0" and "branch.1" of each DS2409 device, all are set to 0. None of the 3 LEDs are lit on the hub (just the power LED). Incidentally, I have a 12vdc PSU connected to the hub. On advice from Hobbyboards, both the "unreg" and "reg" jumpers are in place on the hub. Do I have to do something to "enable" any of the branches, for the devices on them to become visible in OWFS ? Or am I doing something else silly ? There's little in the way of documentation on the 6-channel Hobbyboards hub, as it seems to have been discontinued. Thanks for any help. ------------------------------------------------------------------------------ Monitor your physical, virtual and cloud infrastructure from a single web console. Get in-depth insight into apps, servers, databases, vmware, SAP, cloud infrastructure, etc. Download 30-day Free Trial. Pricing starts from $795 for 25 servers or applications! http://p.sf.net/sfu/zoho_dev2dev_nov _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
