Am 25.05.2013 23:24, schrieb foster:
>
> error is the same:
>
> CONNECT: ow_ds2482.c:(399) Found an i2c device at /dev/i2c-1 address 18
> DEBUG: ow_ds2482.c:(516) ok
> CONNECT: ow_ds2482.c:(428) i2c device at /dev/i2c-1 address 18 appears to be
> DS2482-x00
> DEBUG: ow_ds2482.c:(785) Channel select set error
> CONNECT: ow_ds2482.c:(692) DS2482-100 (Single channel)
> DEBUG: ow_ds2482.c:(676) Cannot set to port configuration -- not a DS2483
>
These aren't errors but mere informational messages. There is no other
way to test for DS2482-100, DS2482-800 or DS2483 than to check which
features are missing. So you have a DS2482-100 here.
If bus.0 is not there there should be *another* problem.
Kind regards
Jan
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers
