*sudo /opt/owfs/bin/owserver --i2c=/dev/i2c-1 --server localhost:4304 --debug* result: CONNECT: owlib.c:(112) Cannot open server at localhost:4304 -- first attempt. DEBUG: ow_net_client.c:(85) IP address=[localhost] port=[4304] CONNECT: ow_net_client.c:(147) [Address family not supported by protocol] Socket problem CONNECT: owlib.c:(117) Cannot open server at localhost:4304 -- second (and final) attempt. CONNECT: ow_ds2482.c:(399) Found an i2c device at /dev/i2c-1 address 18 DEBUG: ow_ds2482.c:(516) ok CONNECT: ow_ds2482.c:(428) i2c device at /dev/i2c-1 address 18 appears to be DS2482-x00 DEBUG: ow_ds2482.c:(785) Channel select set error CONNECT: ow_ds2482.c:(692) DS2482-100 (Single channel) DEBUG: ow_ds2482.c:(676) Cannot set to port configuration -- not a DS2483 *with --nozero* command never finish.
Could be a problem that i have static ip on raspberry? /etc/network/interfaces: #iface eth0 inet dhcp # The loopback interface auto lo iface lo inet loopback auto eth0 iface eth0 inet static #your static IP address 192.168.2.198 #your gateway IP gateway 192.168.2.1 netmask 255.255.255.0 #your network address "family" #network 192.168.2.99 #broadcast 192.168.2.199 allow-hotplug wlan0 iface wlan0 inet manual wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf iface default inet dhcp -- View this message in context: http://owfs-developers.1086194.n5.nabble.com/owhttpd-in-2-9p0-tp9556p9710.html Sent from the OWFS Developers mailing list archive at Nabble.com. ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
