Hello
I installed the owfs packages on my Pi (Raspbian - last release) : 2.8p15
is the last version.
I use /etc/owfs.conf file to facilitate the configuration. Here it is:
SERVER: -d /dev/i2c-1
SERVER: -p 4304
!SERVER: -s 4304
FS: -m /mnt/1wire
FS: allow_other
FS: nonempty
HTTP: -p 4444
#alias = /etc/owfs.alias
FTP: -p 2120
Then, I configure to start owserver, owfs and owhttpd that seem to work
fine except that my 1-wire probes appear twice in the filesystem (1D & FF):
pi@Pi1Wire /mnt/1wire $ dir
total 4
0 drwxr-xr-x 1 root root 8 jun 26 15:13 .
4 drwxr-xr-x 4 root root 4096 jun 26 10:42 ..
0 drwxrwxrwx 1 root root 8 jun 26 15:19 1D.CBD90D000000
0 drwxrwxrwx 1 root root 8 jun 26 15:19 1D.CBD90D000000
0 drwxr-xr-x 1 root root 8 jun 26 15:13 alarm
0 drwxr-xr-x 1 root root 8 jun 26 15:13 bus.0
0 drwxr-xr-x 1 root root 8 jun 26 15:13 bus.1
0 drwxrwxrwx 1 root root 8 jun 26 15:19 FF.7D0800000100
0 drwxrwxrwx 1 root root 8 jun 26 15:19 FF.7D0800000100
0 drwxr-xr-x 1 root root 8 jun 26 15:13 settings
0 drwxr-xr-x 1 root root 8 jun 26 15:13 statistics
0 drwxr-xr-x 1 root root 32 jun 26 15:13 structure
0 drwxr-xr-x 1 root root 8 jun 26 15:13 system
0 drwxr-xr-x 1 root root 8 jun 26 15:13 uncached
Then, I cannot use owfs to read/write to 1wire
my second question is regarding the usage of alias inside the owfs.conf file
is it allowed touse that command at that place: alias = /etc/owfs.alias or
is there another easier tip ?
Thank you
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
