> Hi Paul, > > > On Wed, Aug 6, 2014 at 9:54 PM, Paul Alfille <paul.alfi...@gmail.com> > wrote: > >> Hi Akos, >> >> Can you clarify? Do some combinations of platform and version work and >> some not? Or do you have trouble in all circumstances. >> > > Normal PC with Linux (Ubuntu x64) works perfectly, regardless of version. > That's why I think the hardware setup is fine. > I use a HobbyBoards 8-relay board, everything is on factory default. > > PC environment is a bit more actual: 2.8p21 > Openwrt environment: temperature reading works from a 18S20. > I try to write (and read back) PIO.x under owfs. > > Right now I encountered that writing to PIO.BYTE works as expected > (appropriate relays will be turned on/off). > Reading from PIO.BYTE also reflects the correct state. > So the problem seems to be with PIO.x only. > > Maybe a big endian / little endian problem?
That sounds like the endian problem I found on the 2413 dual output device. The fix I produced went into the main tree but I can't remember if it extends to the 2408. -- Robin Gilks zl3rob/g8ecj Internet: g8...@gilks.org http://www.gilks.org ------------------------------------------------------------------------------ Infragistics Professional Build stunning WinForms apps today! Reboot your WinForms applications with our WinForms controls. Build a bridge from your legacy apps to the future. http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
