I’ve upgraded the firmware to “Barrier breaker rc2” which ships owfs 2.9p5 and it seems to work fine. It is not very extensively tested yet of course.
Akos 2014.08.09. dátummal, 8:13 időpontban Akos Gabriel <akos.gabr...@gmail.com> írta: > I'll look for an upgrade soon, thanks for the version info. > > Best, > Akos > > > On Thu, Aug 7, 2014 at 11:18 PM, Paul Alfille <paul.alfi...@gmail.com> wrote: > Indeed, Robin Gilks endian corrections were in 2.9p3 > > Can you try a newer version and see if the problem persists? > > Paul > > > On Thu, Aug 7, 2014 at 2:45 AM, Robin Gilks <g8...@gilks.org> wrote: > > > Hi Paul, > > > > > > On Wed, Aug 6, 2014 at 9:54 PM, Paul Alfille <paul.alfi...@gmail.com> > > wrote: > > > >> Hi Akos, > >> > >> Can you clarify? Do some combinations of platform and version work and > >> some not? Or do you have trouble in all circumstances. > >> > > > > Normal PC with Linux (Ubuntu x64) works perfectly, regardless of version. > > That's why I think the hardware setup is fine. > > I use a HobbyBoards 8-relay board, everything is on factory default. > > > > PC environment is a bit more actual: 2.8p21 > > Openwrt environment: temperature reading works from a 18S20. > > I try to write (and read back) PIO.x under owfs. > > > > Right now I encountered that writing to PIO.BYTE works as expected > > (appropriate relays will be turned on/off). > > Reading from PIO.BYTE also reflects the correct state. > > So the problem seems to be with PIO.x only. > > > > Maybe a big endian / little endian problem? > > That sounds like the endian problem I found on the 2413 dual output > device. The fix I produced went into the main tree but I can't remember if > it extends to the 2408. > > > -- > Robin Gilks zl3rob/g8ecj > Internet: g8...@gilks.org http://www.gilks.org > > > > > ------------------------------------------------------------------------------ > Infragistics Professional > Build stunning WinForms apps today! > Reboot your WinForms applications with our WinForms controls. > Build a bridge from your legacy apps to the future. > http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk > _______________________________________________ > Owfs-developers mailing list > Owfs-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/owfs-developers > > > ------------------------------------------------------------------------------ > Infragistics Professional > Build stunning WinForms apps today! > Reboot your WinForms applications with our WinForms controls. > Build a bridge from your legacy apps to the future. > http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk > _______________________________________________ > Owfs-developers mailing list > Owfs-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/owfs-developers > >
------------------------------------------------------------------------------
_______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
