Tomasz, Thank you for the reply. As you have said I was hoping to set it up so that everything talks to the owserver but I am unsure how to go about this. My machines ip address is 192.168.1.101 and everything pertaining to 1-wire, such as scripts will be running on it. My owfs.config is:-
! server: server = localhost:4304 server: device = /dev/ttySNX0 mountpoint = /mnt/1wire allow_other http: port = 2121 ftp: port = 2120 server: port = localhost:4304 As far as I can see, this should be configured correctly to do this. David On 8/28/2015 9:36 AM, Tomasz Torcz wrote: > You are using recent Ubuntu, so you can enable owserver.socket and have > owserver be started automatically when it's needed. And then you can > configure owfs, owhttpd and other to connect to owserver and do not > interact with 1wire bus directly. ------------------------------------------------------------------------------ _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers