Hello,

On my Pi V3.1p3 will not build right.
Configure work with the following configuration:
Current configuration:
    Deployment location: /opt/owfs
Compile-time options:
                      USB is enabled
                    AVAHI is DISABLED
                      I2C is enabled
                       W1 is enabled
    Parallel port DS1410E is enabled
           FTDI (LinkUSB) is DISABLED
         Zeroconf/Bonjour is enabled
             Debug-output is enabled
               Mutexdebug is enabled
                Profiling is DISABLED
Tracing memory allocation is DISABLED
Module configuration:
                    owlib is enabled
                  owshell is enabled
                     owfs is enabled
                  owhttpd is enabled
                   owftpd is enabled
                 owserver is enabled
               owexternal is enabled
                    ownet is enabled
                 ownetlib is enabled
                    owtap is enabled
                    owmon is enabled
                   owcapi is enabled
                     swig is enabled
                   owperl is enabled
                    owphp is DISABLED
                 owpython is enabled
                    owtcl is enabled
              unit tests are DISABLED

But by the build i will get the error:

owusbprobe.o: In function `list_usb_devices_iter':
/home/pi/owfs-3.1p3/module/owshell/src/c/owusbprobe.c:149: undefined 
reference to `libusb_strerror'
/home/pi/owfs-3.1p3/module/owshell/src/c/owusbprobe.c:159: undefined 
reference to `libusb_strerror'
/home/pi/owfs-3.1p3/module/owshell/src/c/owusbprobe.c:154: undefined 
reference to `libusb_strerror'
/home/pi/owfs-3.1p3/module/owshell/src/c/owusbprobe.c:132: undefined 
reference to `libusb_strerror'
/home/pi/owfs-3.1p3/module/owshell/src/c/owusbprobe.c:135: undefined 
reference to `libusb_strerror'
owusbprobe.o:/home/pi/owfs-3.1p3/module/owshell/src/c/owusbprobe.c:182: more 
undefined references to `libusb_strerror' follow
collect2: ld returned 1 exit status
Makefile:643: recipe for target 'owusbprobe' failed

Best regards,
Roland


------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity 
planning reports. http://sdm.link/zohodev2dev
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers

Reply via email to