Thanks Jan. Do you know if there is any way to limit values for IO modules? I have tested with DS2413, fake gives random values, tester gives consistent values, but accessing via the owhttpd page any change I make is immediately over-written for both configs.
Mick On 06/12/16 00:01, Jan Kandziora wrote: > Am 05.12.2016 um 16:39 schrieb Mick Sulley: >> OK more research and I have made a bit of progress. >> >> adding >> >> server: fake=10.053C8A010800,10.2AFE89010800,10.90F889010800 >> >> to owfs.conf creates these devices with random values, different at each >> read. They can be split over different lines e.g. >> >> server: fake=10.053C8A010800 >> fake=10.2AFE89010800,10.90F889010800 >> > fake= is a hostadapter option. What you defined here is > > * a fake hostadapter with a connected 10.053C8A010800 which can only be > seen by owserver. > > * another fake hostadapter with a connected 10.2AFE89010800 and > 10.90F889010800 which can be seen by all programs using owlib directly > (and having -c /etc/owfs.conf on their command line). > > > > >> Also you can limit the values - >> >> --temperature_low=20.1 >> --temperature_high=22.1 >> > Again, these are options used by all programs using owlib directly and > having -c /etc/owfs.conf on their command line. > > >> Is there any way to set individual temperatures for fake devices? >> > No. All fake devices share the same static data and do not have > individual properties. > > >> Using 'tester' in place of 'fake' creates the device with a consistent >> value, but there does not seem to be any way to control what that value >> is, --temperature_low=20.1, --temperature_high=22.1 has no effect. The >> values seem to be different for each device, but all are many hundreds >> or thousands of degrees. >> > IIRC tester is different from fake only in how the cache is handled. > Maybe someone else has more insight. > > > Kind regards > > Jan > > ------------------------------------------------------------------------------ > Developer Access Program for Intel Xeon Phi Processors > Access to Intel Xeon Phi processor-based developer platforms. > With one year of Intel Parallel Studio XE. > Training and support from Colfax. > Order your platform today.http://sdm.link/xeonphi > _______________________________________________ > Owfs-developers mailing list > Owfs-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/owfs-developers ------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today.http://sdm.link/xeonphi _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers