On 18/07/17 11:28, Nigel Titley wrote: > > Thanks to the good offices of Jan the SS-WALL-TH is now integrated > into OWFS. If you have one of these then please be aware that older > releases of the firmware have a bug that causes the humidity value to > be reported as a negative value now and again (conditions under which > this happens are somewhat vague). If you've seen this effect and you > are in Europe then let us (Homechip) know, even if you didn't buy your > device from us, and we will arrange for a replacement. > > The other thing we have noticed during testing is that activating the > LED causes a substantial (>5C) temperature rise. iButtonlink tell us > that the LED should not be left on in normal operation. It is there to > enable location of the device after installation. Once located, turn > it off. > > One final note, the wiring colour is black - GND, red - 5V, blue - OW > data. This isn't currently in the manual (which is being revised as we > speak). > > I've added firmware version reporting to the SS-WALL-TH code so you can see if you have obsolete firmware. Firmware prior to 1.4 is suspect and will be updated by IBL on request.
Nigel -- Homechip Ltd Tel: +44 (0) 1908 410175 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers