Sorry. I got some wire shorted in my circuit that's why it wasn't working.
now its working well sorry again.

On Fri, May 17, 2019 at 2:09 PM Nico Bouthoorn <n...@cuora.nl> wrote:

> How do you use the ds18b20?, parasitic or it's own power.  I got very
> strange readings if the power pin left open on the ds18b20.
>
> Nico
>
> nihar Modi schreef:
> > Hey, thanks for the reply. But meanwhile I got in new trouble. Owdir
> command sometime shows all the sensors but as I add a new one it randomly
> shows two or three sensors only. I am trying continuously for two days and
> same problem persists. I am using 7-8 ds18b20 with ds2482-800 and powering
> it through R pi 3b 3.3 volts. I am using external 4.7K pull up. Please tell
> a solution. Thanks in advance.
> >
> > On Thu 16 May, 2019, 17:36 Jan Kandziora, <j...@gmx.de <mailto:j...@gmx.de>>
> wrote:
> >
> >     Am 16.05.19 um 11:33 schrieb modi:
> >      > Hi
> >      > I am using owfs for first time. I have to take temperature from
> 10 dsb1820
> >      > through ds2482-800 via r pi 3. I have followed instructions from
> >      > http://www.sheepwalkelectronics.co.uk/RPI2_software.php .
> >      >
> >      > It is giving correct values until I connect 5 sensors on one bus.
> As soon as
> >      > I connect 6th one it gives 85 as output. I have tried 3 on one
> bus and 3 on
> >      > other but same 85 output. I have tried 1.5K instead of 4.7K, no
> difference.
> >      > I can only use 3.3 volts for ds2482-800 as it is a part of larger
> system.
> >      >
> >     85°C is the power-on value. If you get a steady 85°C readout, it
> means
> >     your sensors power-cycle during the conversion.
> >
> >     You don't have to put pullups to the DS2482-800's 1W pins, it does so
> >     internally. It also uses its strong pullup feature automatically.
> >
> >     Check your power supply.
> >
> >     Kind regards
> >
> >              Jan
> >
> >
> >     _______________________________________________
> >     Owfs-developers mailing list
> >     Owfs-developers@lists.sourceforge.net <mailto:
> Owfs-developers@lists.sourceforge.net>
> >     https://lists.sourceforge.net/lists/listinfo/owfs-developers
> >
> >
> >
> >
> >
> > _______________________________________________
> > Owfs-developers mailing list
> > Owfs-developers@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/owfs-developers
> >
>
> --
> 0623391101
>
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers

Reply via email to