The way I've done it in the past was
Install SP2 on the first box, run the wizard, when it prompts you to tell you to make sure all the other servers on the farm on in this screen (after you click next a few times) go to the second box and do the same thing. Get all the boxes to have that popup then click next on the first box, wait for it to finish, click next on the second box, etc etc. Here's some instructions to0: https://msmvps.com/blogs/shane/archive/2009/04/29/install-guide-sp2-for- sharepoint-wss-v3-and-moss-2007.aspx Fadi ________________________________ From: ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com] On Behalf Of Martin Tse Sent: Wednesday, 16 September 2009 6:36 PM To: ozmoss@ozmoss.com Subject: Installing WSS 3.0 SP2 "Hi guys, I have an installation of SP2 coming for a client and would really like to have verification on how to proceed with installing on a multiple server environment. Environment: 2 x WFE Approach: 1. Install WSS 3.0 on WFE01 when the wizard prompts click Next. This will then prompt " You must run setup to install new binary ... and click OK to continue". 2. Proceed to install SP2 on WFE2, when the wizard prompts I will cancel it 3. Go back to WFE01 and click OK. Questions: 1. Is it OK to not click Next to the wizard, then install SP2 on WFE02 cancel the wizard, go back to WFE01 and continue the wizard. 2. Do I need to run the WSS 3.0 wizards on both machines? If you guys have a better approach please let me know, I will be ultimately be upgrading to MOSS SP2 as well. I am just a bit curious because the prompts are telling me to do one thing and the real world experiences are different. Thanks! Martin
_______________________________________________ ozmoss mailing list ozmoss@ozmoss.com http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss