> On Jul 11, 2017, at 15:40, Jason 'XenoPhage' Frisvold 
> <[email protected]> wrote:
> 
> 
> Ok, giving this a try now.  I did create a portal and put a filter of
> Connection Type WIRED_MAC_AUTH which seems to at least get me into the
> registration network when I disable 802.1x.  But, once in there, I'm not
> getting redirected to the portal, which is odd.  Auto-registration is
> disabled, but everything else is the same as the default profile.  I
> don't see a "use captive portal" button anywhere to force this action.

You don't need to enable the captive portal.
It's on by default if you have an interface defined as type=registration.
As long as you are sent to the registration VLAN, and you get your IP and DNS 
configuration from the PacketFence managed dhcpd you should be redirected to 
the captive portal.

Check to see if those assumptions are correct.
I.e. are you sent to the right VLAN?
Do you get your dhcp lease and configuration from the PacketFence dhcpd?

If you do, your DNS queries should be sent to pfdns, which should return the IP 
of the captive portal to any (non-passthrought) dns request.
See if your dns requests are sent to PacketFence, and if the reply points to 
the IP of the captive-portal.

Let me know what you find...


> Makes sense, I'll go ahead and start building granular profiles.  How do
> I specify non-802.1x wireless traffic?  Wireless-802.11-NoEAP?
> 

Exactly.

Regards,
--
Louis Munro
[email protected] <mailto:[email protected]>  ::  www.inverse.ca 
<http://www.inverse.ca/> 
+1.514.447.4918 x125  :: +1 (866) 353-6153 x125
Inverse inc. :: Leaders behind SOGo (www.sogo.nu <http://www.sogo.nu/>) and 
PacketFence (www.packetfence.org <http://www.packetfence.org/>)
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to