Hi Jimmy and Fabrice,
I would like to report the same experience. I have a realm
(OPTIONS-AD-REALM) and it is associated with the AD domain (optionsad), i.e.
[OPTIONS-AD-REALM]
domain=optionsad
options=strip
I had similar problems with winbind, same errors in the output of RADIUS
debug. Moreover, my attempt to test authentication from the command line was
successful:
[root@PacketFence-ZEN bin]# ./pftest authentication it.tech XXXXXXXXX
Authenticating against OPTIONS-AD-SOURCE
Authentication SUCCEEDED against OPTIONS-AD-SOURCE (Authentication
successful.)
Matched against OPTIONS-AD-SOURCE for 'authentication' rules
set_role : Staff
set_unreg_date : 2019-12-31
Go figure whats wrong, permissions, bugs or a lack of understanding from my
side as what I see as the result of ntlm_auth query drives me mad:
[root@PacketFence-ZEN bin]# ntlm_auth --request-nt-key --domain=optionsad
--username=it.tech
Password:
could not obtain winbind separator!
Reading winbind reply failed! (0x01)
: (0x0)
So, here I would like Fabrice comment on this, specifically bearing in mind
that it all works if I use only the default realm and link it to the AD
domain.
Whats the point of having named realms ?
Moreover, if I test my authentication source with the authentication realm
pointing to default the test fails. If I remove it then the test goes
through ?
Whats the point of having the realm here, Fabrice ?
Moreover, if I use FQDN for the host that acts as the windows domain
controller my test also fails but if I use the IP address it is all good.
I know and I swear that PF can resolve the name normally.
There are more questions that Id like to ask strongly believing theres
faulty code or missing documentation or a combination of both.
Eugene
From: Durand fabrice via PacketFence-users
[mailto:[email protected]]
Sent: Tuesday, March 06, 2018 6:26 PM
To: [email protected]
Cc: Durand fabrice <[email protected]>
Subject: Re: [PacketFence-users] [Packetfence] AD authentication with
FreeRadius: "reading winbind reply failed!"
Hello Jimmy,
create the realms associated to your domain, like you have a user like
ACME\bob and [email protected] <mailto:[email protected]> then create the 2 realms
and associate them to your AD.
Regards
Fabrice
Le 2018-03-06 à 07:14, Jimmy Claes via PacketFence-users a écrit :
Ive been trying to figure out this problem for days, whenever I try to
authenticate a user on Windows, I get the following error while the login is
correct:
wbinfo p fails aswell:
Winbind service is running:
Freeradius service is running:
The permissions on winbindd_privileged are properly set:
Result of running freeradius X attached.
----------------------------------------------------------------------------
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users