Hello Eugene

By the following "it all works if I use only the default realm and link it to 
the AD domain." You mean that if u set your sources to the default realm, 
assigning AD to the default realm and have no other realms configured, 
authenticating with AD works?
Would u mind sharing the configuration u have that works with default realm?
Short term, it might just suffice for us.

Regards
Jimmy

Van: E.P. via PacketFence-users [mailto:[email protected]]
Verzonden: woensdag 7 maart 2018 4:33
Aan: [email protected]
CC: E.P. <[email protected]>
Onderwerp: Re: [PacketFence-users] [Packetfence] AD authentication with 
FreeRadius: "reading winbind reply failed!"

Hi Jimmy and Fabrice,
I would like to report the same experience. I have a realm (OPTIONS-AD-REALM) 
and it is associated with the AD domain (optionsad), i.e.

[OPTIONS-AD-REALM]
domain=optionsad
options=strip

I had similar problems with winbind, same errors in the output of RADIUS debug. 
Moreover, my attempt to test authentication from the command line was 
successful:

[root@PacketFence-ZEN bin]# ./pftest authentication it.tech XXXXXXXXX

Authenticating against OPTIONS-AD-SOURCE
  Authentication SUCCEEDED against OPTIONS-AD-SOURCE (Authentication 
successful.)
  Matched against OPTIONS-AD-SOURCE for 'authentication' rules
    set_role : Staff
    set_unreg_date : 2019-12-31

Go figure what's wrong, permissions, bugs or a lack of understanding from my 
side as what I see as the result of ntlm_auth query drives me mad:

[root@PacketFence-ZEN bin]# ntlm_auth --request-nt-key --domain=optionsad 
--username=it.tech
Password:
could not obtain winbind separator!
Reading winbind reply failed! (0x01)
:  (0x0)

So, here I would like Fabrice comment on this, specifically bearing in mind 
that it all works if I use only the default realm and link it to the AD domain.
What's the point of having named realms ?
Moreover, if I test my authentication source with the authentication realm 
pointing to default the test fails. If I remove it then the test goes through ?
What's the point of having the realm here, Fabrice ?
Moreover, if I use FQDN for the host that acts as the windows domain controller 
my test also fails but if I use the IP address it is all good.
I know and I swear that PF can resolve the name normally.
There are more questions that I'd like to ask strongly believing there's faulty 
code or missing documentation or a combination of both.

Eugene

From: Durand fabrice via PacketFence-users 
[mailto:[email protected]]

Sent: Tuesday, March 06, 2018 6:26 PM
To: 
[email protected]<mailto:[email protected]>
Cc: Durand fabrice <[email protected]<mailto:[email protected]>>
Subject: Re: [PacketFence-users] [Packetfence] AD authentication with 
FreeRadius: "reading winbind reply failed!"


Hello Jimmy,

create the realms associated to your domain, like you have a user like ACME\bob 
and [email protected]<mailto:[email protected]> then create the 2 realms and associate 
them to your AD.

Regards

Fabrice



Le 2018-03-06 à 07:14, Jimmy Claes via PacketFence-users a écrit :
I've been trying to figure out this problem for days, whenever I try to 
authenticate a user on Windows, I get the following error while the login is 
correct:
[cid:[email protected]]

'wbinfo -p' fails aswell:
[cid:[email protected]]

Winbind service is running:
[cid:[email protected]]

Freeradius service is running:
[cid:[email protected]]

The permissions on winbindd_privileged are properly set:
[cid:[email protected]]

Result of running 'freeradius -X' attached.




------------------------------------------------------------------------------

Check out the vibrant tech community on one of the world's most

engaging tech sites, Slashdot.org! http://sdm.link/slashdot



_______________________________________________

PacketFence-users mailing list

[email protected]<mailto:[email protected]>

https://lists.sourceforge.net/lists/listinfo/packetfence-users

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to