Hello,

Theoretically, there are 2 VLANs on the switch.
I followed the Network Devices Configuration Guide to configure my switch, the 
HP ProCurve 2500 Series chapter.

On PacketFence, I linked my AD and added my switch. I created a connection 
profile saying that if the device that plugs into my switch was part of the AD, 
it would be on VLAN 1, and if it wasn't, it would be on VLAN 2.

But there is no indication that it works.

Is what I did theoretically correct?

De : Durand fabrice via PacketFence-users 
<[email protected]>
Envoyé : mardi, 9 mars 2021 02:53
À : [email protected]
Cc : Durand fabrice <[email protected]>
Objet : Re: [PacketFence-users] VLANs assignation for HP Procurve 2824 switch


Hello Robin,

what is the configuration you applied on the switch ?

What have been done on the packetfence side ?

Do you have any logs ?

Regards

Fabrice




Le 21-03-08 à 10 h 15, Robin Cortat via PacketFence-users a écrit :
Hello,

I use an HP ProCurve 2824 switch, and the only thing I would like to do with 
PacketFence is to assign VLANs to devices that would connect to the switch 
based on authentication rules.

Unfortunately, after hours and hours of reading documentation and testing, I 
did not get what I wanted. Isn't there a simple way to achieve this solution?

Thank you very much for your answer.






_______________________________________________

PacketFence-users mailing list

[email protected]<mailto:[email protected]>

https://lists.sourceforge.net/lists/listinfo/packetfence-users
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to