Can you share what you configure on the switch ?

Do you see anything in the radius.log file ?

Le 21-03-09 à 08 h 25, Robin Cortat a écrit :

Precisely and simply, this is what I want to do:

A device plugs into the switch; is this device part of my AD? If yes, it joins my company VLAN, if not, it joins an isolation VLAN.

I really need your help because this is an important and decisive project for me. I think the problem is that I don't know exactly how and what commands I need to perform on my switch and in packetfence to achieve this.

Thank you in advance for your answer.

rcortat <http://www.imageson.ch/>

logoBNJ <http://www.bnjpublicite.ch/>

        

logoRJB <http://www.rjb.ch/>

        

logoRTN <http://www.rtn.ch/>

        

logoRFJ <http://www.rfj.ch/>

        

logoGRRIF <http://www.grrif.ch/>

<https://redir.bnj.ch/site/IS>

*De :*Robin Cortat
*Envoyé :* mardi, 9 mars 2021 07:15
*À :* '[email protected]' <[email protected]>
*Cc :* Durand fabrice <[email protected]>
*Objet :* RE: [PacketFence-users] VLANs assignation for HP Procurve 2824 switch

Hello,

Theoretically, there are 2 VLANs on the switch.

I followed the Network Devices Configuration Guide to configure my switch, the HP ProCurve 2500 Series chapter.

On PacketFence, I linked my AD and added my switch. I created a connection profile saying that if the device that plugs into my switch was part of the AD, it would be on VLAN 1, and if it wasn't, it would be on VLAN 2.

But there is no indication that it works.

Is what I did theoretically correct?

*De :*Durand fabrice via PacketFence-users <[email protected] <mailto:[email protected]>>
*Envoyé :* mardi, 9 mars 2021 02:53
*À :* [email protected] <mailto:[email protected]>
*Cc :* Durand fabrice <[email protected] <mailto:[email protected]>>
*Objet :* Re: [PacketFence-users] VLANs assignation for HP Procurve 2824 switch

Hello Robin,

what is the configuration you applied on the switch ?

What have been done on the packetfence side ?

Do you have any logs ?

Regards

Fabrice

Le 21-03-08 à 10 h 15, Robin Cortat via PacketFence-users a écrit :

    Hello,

    I use an HP ProCurve 2824 switch, and the only thing I would like
    to do with PacketFence is to assign VLANs to devices that would
    connect to the switch based on authentication rules.

    Unfortunately, after hours and hours of reading documentation and
    testing, I did not get what I wanted. Isn't there a simple way to
    achieve this solution?

    Thank you very much for your answer.



    _______________________________________________

    PacketFence-users mailing list

    [email protected]  
<mailto:[email protected]>

    https://lists.sourceforge.net/lists/listinfo/packetfence-users

_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to