Try to remove that in the LOCAL realm : ldap_source=celinaisd
Then with the cli do:
/usr/local/pf/bin/pfcmd service radiusd generateconfig
/usr/local/pf/bin/pfcmd service radiusd restart
and retry.
Le 2021-04-02 à 12 h 00, Joshua Wise a écrit :
No luck adjusting those values from the web gui, same error.
realm.conf
[1 DEFAULT]
permit_custom_attributes=disabled
radius_auth_proxy_type=keyed-balance
radius_auth_compute_in_pf=enabled
eduroam_radius_auth=
eduroam_radius_auth_proxy_type=keyed-balance
eduroam_radius_acct=
radius_acct_proxy_type=load-balance
radius_auth=
eduroam_radius_auth_compute_in_pf=enabled
eduroam_radius_acct_proxy_type=load-balance
radius_acct=
domain=celinaisd
[1 LOCAL]
radius_strip_username=enabled
permit_custom_attributes=disabled
radius_auth_proxy_type=keyed-balance
radius_auth_compute_in_pf=enabled
eduroam_radius_auth=
domain=celinaisd
eduroam_radius_auth_proxy_type=keyed-balance
eduroam_radius_acct=
radius_acct_proxy_type=load-balance
radius_auth=
ldap_source=celinaisd
eduroam_radius_auth_compute_in_pf=enabled
eduroam_radius_acct_proxy_type=load-balance
radius_acct=
*Joshua Wise*
Systems Engineer, Celina ISD
469-742-9113
https://www.celinaisd.com <https://www.celinaisd.com/>
On Fri, Apr 2, 2021 at 10:32 AM Fabrice Durand <[email protected]
<mailto:[email protected]>> wrote:
Hello Joshua,
yes it can be there and it can also be because you set a "LDAP
Source for TTLS PAP" in the realm.
I am just curious to see why it doesn't work, can you share the
realm.conf file ?
Regards
Fabrice
Le 2021-04-01 à 16 h 26, Joshua Wise a écrit :
Are you referring to the section under Configuration > Default >
EAP Profiles?
I reset it to defaults, but get the same error.
I actually had this all working, the authentication portion at
least, about a month ago. After an extended break, it's doing this.
I'm tempted to start over with a fresh installation.
*Joshua Wise*
Systems Engineer, Celina ISD
469-742-9113
https://www.celinaisd.com <https://www.celinaisd.com/>
On Wed, Mar 31, 2021 at 7:22 AM Fabrice Durand via
PacketFence-users <[email protected]
<mailto:[email protected]>> wrote:
Hello Joshua,
sorry for the late reply.
So it looks that you played with the radius eap configuration.
Can you revert this section (put as default) and retry ?
Thanks
Regards
Fabrice
Le 2021-03-29 à 16 h 15, Joshua Wise via PacketFence-users a
écrit :
Pastebin of the response.
https://pastebin.com/L70fKEB7 <https://pastebin.com/L70fKEB7>
*
*
*Joshua Wise*
Systems Engineer, Celina ISD
469-742-9113
https://www.celinaisd.com <https://www.celinaisd.com/>
On Sat, Mar 27, 2021 at 8:13 AM Durand fabrice via
PacketFence-users <[email protected]
<mailto:[email protected]>> wrote:
Then run the command without the filter and reconnect
your device.
raddebug -f /usr/local/pf/var/run/radiusd.sock -t 3600
Le 21-03-27 à 08 h 29, Joshua Wise via PacketFence-users
a écrit :
Command appears to run endlessly, I grabbed a snippet
that appears to be what is repeated.
(3440) Sat Mar 27 07:25:15 2021: Debug: Received
Status-Server Id 51 from 127.0.0.1:51452
<http://127.0.0.1:51452> to 127.0.0.1:18121
<http://127.0.0.1:18121> length 50
(3440) Sat Mar 27 07:25:15 2021: Debug:
Message-Authenticator = 0x9257e8cab94913463172d8be5663c80b
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Statistics-Type = 15
(3440) Sat Mar 27 07:25:15 2021: Debug: # Executing
group from file /usr/local/pf/raddb/sites-enabled/status
(3440) Sat Mar 27 07:25:15 2021: Debug: Autz-Type
Status-Server {
(3440) Sat Mar 27 07:25:15 2021: Debug: [ok] = ok
(3440) Sat Mar 27 07:25:15 2021: Debug: } # Autz-Type
Status-Server = ok
(3440) Sat Mar 27 07:25:15 2021: Debug: Sent
Access-Accept Id 51 from 127.0.0.1:18121
<http://127.0.0.1:18121> to 127.0.0.1:51452
<http://127.0.0.1:51452> length 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Access-Requests = 3441
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Access-Accepts = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Access-Rejects = 2
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Access-Challenges = 16
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Auth-Responses = 18
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Auth-Duplicate-Requests = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Auth-Malformed-Requests = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Auth-Invalid-Requests = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Auth-Dropped-Requests = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Auth-Unknown-Types = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Accounting-Requests = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Accounting-Responses = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Acct-Duplicate-Requests = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Acct-Malformed-Requests = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Acct-Invalid-Requests = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Acct-Dropped-Requests = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Acct-Unknown-Types = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Proxy-Access-Requests = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Proxy-Access-Accepts = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Proxy-Access-Rejects = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Proxy-Access-Challenges = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Proxy-Auth-Responses = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Proxy-Auth-Duplicate-Requests = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Proxy-Auth-Malformed-Requests = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Proxy-Auth-Invalid-Requests = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Proxy-Auth-Dropped-Requests = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Proxy-Auth-Unknown-Types = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Proxy-Accounting-Requests = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Proxy-Accounting-Responses = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Proxy-Acct-Duplicate-Requests = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Proxy-Acct-Malformed-Requests = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Proxy-Acct-Invalid-Requests = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Proxy-Acct-Dropped-Requests = 0
(3440) Sat Mar 27 07:25:15 2021: Debug:
FreeRADIUS-Total-Proxy-Acct-Unknown-Types = 0
(3440) Sat Mar 27 07:25:15 2021: Debug: Finished request
(3440) Sat Mar 27 07:25:20 2021: Debug: Cleaning up
request packet ID 51 with timestamp +51321
*Joshua Wise*
Systems Engineer, Celina ISD
469-742-9113
https://www.celinaisd.com <https://www.celinaisd.com/>
On Fri, Mar 26, 2021 at 9:00 PM Durand fabrice via
PacketFence-users
<[email protected]
<mailto:[email protected]>> wrote:
Hello Joshua,
let's run that:
raddebug -f /usr/local/pf/var/run/radiusd.sock -t
3600 -c '( Calling-Station-Id =~
/78[-:]?4f[-:]?43[-:]?97[-:]?f5[-:]?fe/i )'
And paste the output.
Regards
Fabrice
Le 21-03-26 à 18 h 22, Joshua Wise via
PacketFence-users a écrit :
RADIUS Reply is empty.
I ran the specified patch, restarted services,
same error.
*Joshua Wise*
Systems Engineer, Celina ISD
469-742-9113
https://www.celinaisd.com <https://www.celinaisd.com/>
On Fri, Mar 26, 2021 at 1:47 PM Ludovic Zammit
<[email protected] <mailto:[email protected]>>
wrote:
I never seen that error message.
It needs more investigation.
What is the radius reply given by pf for that
authentication ? Just below the radius request.
Did you patch your server with :
/usr/local/pf/addons/pf-maint.pl
<http://pf-maint.pl>
Then restart all pf services:
/usr/local/pf/bin/pfcmd service pf restart
Thanks,
Ludovic Zammit
[email protected] <mailto:[email protected]> ::
+1.514.447.4918 (x145) ::www.inverse.ca <http://www.inverse.ca>
Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu
<http://www.sogo.nu>) and PacketFence (http://packetfence.org
<http://packetfence.org>)
On Mar 26, 2021, at 2:24 PM, Joshua Wise
<[email protected]
<mailto:[email protected]>> wrote:
RADIS Request Audit log:
NAS-Port-Type = Wireless-802.11
PacketFence-Outer-User =
"[email protected]
<mailto:[email protected]>"
PacketFence-Radius-Ip = "10.56.64.44"
Service-Type = Framed-User Called-Station-Id
= "00-1A-1E-01-EC-98-cisd.1x" State =
0x6f17c8406f1fd21550a9f72c8da28ab6
FreeRADIUS-Proxied-To = 127.0.0.1 Realm =
"default" NAS-IP-Address = 10.56.64.44
PacketFence-NTLMv2-Only = ""
Calling-Station-Id = "78:4f:43:97:f5:fe"
Aruba-Essid-Name = "cisd.1x"
PacketFence-KeyBalanced =
"e779e78c1ea9a92dab5dc5d6d30a8dc7"
PacketFence-Domain = "celinaisd"
Aruba-AP-Group = "CS701" User-Name =
"[email protected]
<mailto:[email protected]>"
Aruba-Location-Id = "ADMIN-MDF-AP16"
NAS-Identifier = "10.56.64.222"
Event-Timestamp = "Mar 25 2021 08:33:08 CDT"
EAP-Message =
0x020800511a0208004c316ec62dd3023b6ff16890ed459e79818b0000000000000000175ed1760cce67ff48491f88d067ce8bc17ec36c65b75de60074657374776966694063656c696e616973642e636f6d
Stripped-User-Name = "testwifi" NAS-Port = 0
Framed-MTU = 1100 EAP-Type = MSCHAPv2
PacketFence-UserNameAttribute =
"[email protected]
<mailto:[email protected]>"
Module-Failure-Message = "celinaisd:
Attribute \"User-Password\" is required for
authentication" User-Password = "******"
SQL-User-Name = "[email protected]
<mailto:[email protected]>"
*Joshua Wise*
Systems Engineer, Celina ISD
469-742-9113
https://www.celinaisd.com
<https://www.celinaisd.com/>
On Fri, Mar 26, 2021 at 12:12 PM Ludovic
Zammit <[email protected]
<mailto:[email protected]>> wrote:
For that radius request, go check
Auditing and show me the radius request.
Thanks,
Ludovic Zammit
[email protected]
<mailto:[email protected]> ::
+1.514.447.4918 (x145) :: www.inverse.ca
<https://www.inverse.ca/>
Inverse inc. :: Leaders behind SOGo
(http://www.sogo.nu
<http://www.sogo.nu/>) and PacketFence
(http://packetfence.org
<http://packetfence.org/>)
On Mar 26, 2021, at 8:43 AM, Joshua Wise
<[email protected]
<mailto:[email protected]>> wrote:
Here we go:
Mar 26 07:40:11 packetfence auth[2770]:
(10350) Login incorrect (celinaisd:
Attribute "User-Password" is required
for authentication):
[[email protected]
<mailto:[email protected]>] (from
client 10.56.64.222/32
<http://10.56.64.222/32> port 0 cli
78:4f:43:97:f5:fe via TLS tunnel)
Mar 26 07:40:11 packetfence auth[2770]:
[mac:78:4f:43:97:f5:fe] Rejected user:
[email protected]
<mailto:[email protected]>
Mar 26 07:40:11 packetfence auth[2770]:
(10351) Login incorrect (eap_peap: The
users session was previously rejected:
returning reject (again.)):
[[email protected]
<mailto:[email protected]>] (from
client 10.56.64.222/32
<http://10.56.64.222/32> port 0 cli
78:4f:43:97:f5:fe)
*
*
*Joshua Wise*
Systems Engineer, Celina ISD
469-742-9113
https://www.celinaisd.com
<https://www.celinaisd.com/>
On Fri, Mar 26, 2021 at 7:00 AM Ludovic
Zammit <[email protected]
<mailto:[email protected]>> wrote:
That’s not good, you should have
something in the log related to that
Mac address. Try another computer or
clear the cache info related to your
Mac in the wifi controller.
Check:
grep MAC_ADDRESS
/usr/local/pf/logs/radius.log
Use 00:11:22:33:44:55 for the Mac
address format.
Thanks,
Ludovic Zammit
[email protected]
<mailto:[email protected]> ::
+1.514.447.4918 (x145) ::
www.inverse.ca <https://www.inverse.ca/>
Inverse inc. :: Leaders behind SOGo
(http://www.sogo.nu
<http://www.sogo.nu/>) and
PacketFence (http://packetfence.org
<http://packetfence.org/>)
On Mar 25, 2021, at 2:20 PM, Joshua
Wise <[email protected]
<mailto:[email protected]>>
wrote:
I don't get a response when using
that command. I can see the log
file exists, modifying with vi
shows the following repeatedly.
Mar 25 03:52:58 packetfence
packetfence: pfperl-api(2202) INFO:
Using 300 resolution threshold
(pf::pfcron::task::cluster_check::run)
Mar 25 03:52:58 packetfence
packetfence: pfperl-api(2202) INFO:
All cluster members are running the
same configuration version
(pf::pfcron::task::cluster_check::run)
Mar 25 03:52:58 packetfence
packetfence: pfperl-api(2204) INFO:
processed 0 security_events during
security_event maintenance
(1616662378.2789 1616662378.28441)
(pf::security_event::security_event_maintenance)
Mar 25 03:52:58 packetfence
packetfence: pfperl-api(2204) INFO:
processed 0 security_events during
security_event maintenance
(1616662378.2855 1616662378.2874)
(pf::security_event::security_event_maintenance)
Mar 25 03:53:58 packetfence
packetfence: pfperl-api(2204) INFO:
Using 300 resolution threshold
(pf::pfcron::task::cluster_check::run)
*Joshua Wise*
Systems Engineer, Celina ISD
469-742-9113
https://www.celinaisd.com
<https://www.celinaisd.com/>
On Thu, Mar 25, 2021 at 10:08 AM
Ludovic Zammit <[email protected]
<mailto:[email protected]>> wrote:
Give me the output of:
grep MAC_ADDRESS
/usr/local/pf/logs/packetfence.log
Thanks,
Ludovic Zammit
[email protected]
<mailto:[email protected]> ::
+1.514.447.4918 (x145) ::
www.inverse.ca
<https://www.inverse.ca/>
Inverse inc. :: Leaders behind
SOGo (http://www.sogo.nu
<http://www.sogo.nu/>) and
PacketFence
(http://packetfence.org
<http://packetfence.org/>)
On Mar 25, 2021, at 8:39 AM,
Joshua Wise
<[email protected]
<mailto:[email protected]>>
wrote:
SSID type is 802.1x with
WPA2-Enterprise.
*Joshua Wise*
Systems Engineer, Celina ISD
469-742-9113
https://www.celinaisd.com
<https://www.celinaisd.com/>
On Thu, Mar 25, 2021 at 7:08
AM Ludovic Zammit
<[email protected]
<mailto:[email protected]>>
wrote:
Hello,
What’s your SSID type ?
Open SSID or 8021.x with
WPA2 Entreprise?
Thanks,
Ludovic Zammit
[email protected]
<mailto:[email protected]> ::
+1.514.447.4918 (x145) ::
www.inverse.ca
<https://www.inverse.ca/>
Inverse inc. :: Leaders
behind SOGo
(http://www.sogo.nu
<http://www.sogo.nu/>) and
PacketFence
(http://packetfence.org
<http://packetfence.org/>)
On Mar 24, 2021, at 3:06
PM, Joshua Wise via
PacketFence-users
<[email protected]
<mailto:[email protected]>>
wrote:
I'm in the process of
testing Packefence with
our Aruba Controller.
I've added our on-prem
Active Directory to
Packetfence, and can test
authentication fine with
pftest, no issues.
I've configured our Aruba
Controller with an 802.1x
SSID, RADIUS, etc.
When I attempt to connect
with username/password,
it fails. I can see in
the RADIUS log that I get
an error "Attribute
"User-Password" is
required for authentication."
Within that log, I can go
to the RADIUS section and
see: User-Password = "******"
This makes me think the
password is being passed
from our Controller to
Packetfence just fine.
Not sure what I'm
missing, any ideas or
suggestions?
*
*
*Joshua Wise*
Systems Engineer, Celina ISD
469-742-9113
https://www.celinaisd.com
<https://www.celinaisd.com/>
_______________________________________________
PacketFence-users mailing
list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
<https://lists.sourceforge.net/lists/listinfo/packetfence-users>
_______________________________________________
PacketFence-users mailing list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
<https://lists.sourceforge.net/lists/listinfo/packetfence-users>
_______________________________________________
PacketFence-users mailing list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
<https://lists.sourceforge.net/lists/listinfo/packetfence-users>
_______________________________________________
PacketFence-users mailing list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
<https://lists.sourceforge.net/lists/listinfo/packetfence-users>
_______________________________________________
PacketFence-users mailing list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
<https://lists.sourceforge.net/lists/listinfo/packetfence-users>
_______________________________________________
PacketFence-users mailing list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
<https://lists.sourceforge.net/lists/listinfo/packetfence-users>
--
Fabrice Durand
[email protected] <mailto:[email protected]> :: +1.514.447.4918 (x135)
::www.inverse.ca <http://www.inverse.ca>
Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu
<http://www.sogo.nu>) and PacketFence (http://packetfence.org
<http://packetfence.org>)
_______________________________________________
PacketFence-users mailing list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
<https://lists.sourceforge.net/lists/listinfo/packetfence-users>
--
Fabrice Durand
[email protected] <mailto:[email protected]> :: +1.514.447.4918 (x135)
::www.inverse.ca <http://www.inverse.ca>
Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu <http://www.sogo.nu>)
and PacketFence (http://packetfence.org <http://packetfence.org>)
--
Fabrice Durand
[email protected] :: +1.514.447.4918 (x135) :: www.inverse.ca
Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence
(http://packetfence.org)
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users