That did it! I can once again connect to the 802.1x with AD credentials.

Thank you for your help!

*Joshua Wise*
Systems Engineer, Celina ISD
469-742-9113
https://www.celinaisd.com



On Fri, Apr 2, 2021 at 11:34 AM Fabrice Durand <[email protected]> wrote:

> Try to remove that in the LOCAL realm : ldap_source=celinaisd
>
> Then with the cli do:
>
> /usr/local/pf/bin/pfcmd service radiusd generateconfig
>
> /usr/local/pf/bin/pfcmd service radiusd restart
>
> and retry.
>
>
> Le 2021-04-02 à 12 h 00, Joshua Wise a écrit :
>
> No luck adjusting those values from the web gui, same error.
>
> realm.conf
>
> [1 DEFAULT]
> permit_custom_attributes=disabled
> radius_auth_proxy_type=keyed-balance
> radius_auth_compute_in_pf=enabled
> eduroam_radius_auth=
> eduroam_radius_auth_proxy_type=keyed-balance
> eduroam_radius_acct=
> radius_acct_proxy_type=load-balance
> radius_auth=
> eduroam_radius_auth_compute_in_pf=enabled
> eduroam_radius_acct_proxy_type=load-balance
> radius_acct=
> domain=celinaisd
>
> [1 LOCAL]
> radius_strip_username=enabled
> permit_custom_attributes=disabled
> radius_auth_proxy_type=keyed-balance
> radius_auth_compute_in_pf=enabled
> eduroam_radius_auth=
> domain=celinaisd
> eduroam_radius_auth_proxy_type=keyed-balance
> eduroam_radius_acct=
> radius_acct_proxy_type=load-balance
> radius_auth=
> ldap_source=celinaisd
> eduroam_radius_auth_compute_in_pf=enabled
> eduroam_radius_acct_proxy_type=load-balance
> radius_acct=
>
> *Joshua Wise*
> Systems Engineer, Celina ISD
> 469-742-9113
> https://www.celinaisd.com
>
>
>
> On Fri, Apr 2, 2021 at 10:32 AM Fabrice Durand <[email protected]> wrote:
>
>> Hello Joshua,
>>
>> yes it can be there and it can also be because you set a "LDAP Source for
>> TTLS PAP" in the realm.
>>
>> I am just curious to see why it doesn't work, can you share the
>> realm.conf file ?
>>
>>
>> Regards
>>
>> Fabrice
>>
>>
>> Le 2021-04-01 à 16 h 26, Joshua Wise a écrit :
>>
>> Are you referring to the section under Configuration > Default > EAP
>> Profiles?
>>
>> I reset it to defaults, but get the same error.
>>
>> I actually had this all working, the authentication portion at least,
>> about a month ago. After an extended break, it's doing this.
>>
>> I'm tempted to start over with a fresh installation.
>>
>> *Joshua Wise*
>> Systems Engineer, Celina ISD
>> 469-742-9113
>> https://www.celinaisd.com
>>
>>
>>
>> On Wed, Mar 31, 2021 at 7:22 AM Fabrice Durand via PacketFence-users <
>> [email protected]> wrote:
>>
>>> Hello Joshua,
>>>
>>> sorry for the late reply.
>>>
>>> So it looks that you played with the radius eap configuration.
>>>
>>> Can you revert this section (put as default) and retry ?
>>>
>>> Thanks
>>>
>>> Regards
>>>
>>> Fabrice
>>>
>>>
>>> Le 2021-03-29 à 16 h 15, Joshua Wise via PacketFence-users a écrit :
>>>
>>> Pastebin of the response.
>>>
>>> https://pastebin.com/L70fKEB7
>>>
>>> *Joshua Wise*
>>> Systems Engineer, Celina ISD
>>> 469-742-9113
>>> https://www.celinaisd.com
>>>
>>>
>>> On Sat, Mar 27, 2021 at 8:13 AM Durand fabrice via PacketFence-users <
>>> [email protected]> wrote:
>>>
>>>> Then run the command without the filter and reconnect your device.
>>>>
>>>> raddebug -f /usr/local/pf/var/run/radiusd.sock -t 3600
>>>>
>>>>
>>>> Le 21-03-27 à 08 h 29, Joshua Wise via PacketFence-users a écrit :
>>>>
>>>> Command appears to run endlessly, I grabbed a snippet that appears to
>>>> be what is repeated.
>>>>
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug: Received Status-Server Id 51
>>>> from 127.0.0.1:51452 to 127.0.0.1:18121 length 50
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:   Message-Authenticator =
>>>> 0x9257e8cab94913463172d8be5663c80b
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:   FreeRADIUS-Statistics-Type =
>>>> 15
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug: # Executing group from file
>>>> /usr/local/pf/raddb/sites-enabled/status
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:   Autz-Type Status-Server {
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:     [ok] = ok
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:   } # Autz-Type Status-Server =
>>>> ok
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug: Sent Access-Accept Id 51 from
>>>> 127.0.0.1:18121 to 127.0.0.1:51452 length 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Access-Requests = 3441
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Access-Accepts = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Access-Rejects = 2
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Access-Challenges = 16
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Auth-Responses = 18
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Auth-Duplicate-Requests = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Auth-Malformed-Requests = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Auth-Invalid-Requests = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Auth-Dropped-Requests = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Auth-Unknown-Types = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Accounting-Requests = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Accounting-Responses = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Acct-Duplicate-Requests = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Acct-Malformed-Requests = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Acct-Invalid-Requests = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Acct-Dropped-Requests = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Acct-Unknown-Types = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Proxy-Access-Requests = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Proxy-Access-Accepts = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Proxy-Access-Rejects = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Proxy-Access-Challenges = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Proxy-Auth-Responses = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Proxy-Auth-Duplicate-Requests = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Proxy-Auth-Malformed-Requests = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Proxy-Auth-Invalid-Requests = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Proxy-Auth-Dropped-Requests = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Proxy-Auth-Unknown-Types = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Proxy-Accounting-Requests = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Proxy-Accounting-Responses = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Proxy-Acct-Duplicate-Requests = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Proxy-Acct-Malformed-Requests = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Proxy-Acct-Invalid-Requests = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Proxy-Acct-Dropped-Requests = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug:
>>>> FreeRADIUS-Total-Proxy-Acct-Unknown-Types = 0
>>>> (3440) Sat Mar 27 07:25:15 2021: Debug: Finished request
>>>> (3440) Sat Mar 27 07:25:20 2021: Debug: Cleaning up request packet ID
>>>> 51 with timestamp +51321
>>>>
>>>> *Joshua Wise*
>>>> Systems Engineer, Celina ISD
>>>> 469-742-9113
>>>> https://www.celinaisd.com
>>>>
>>>>
>>>> On Fri, Mar 26, 2021 at 9:00 PM Durand fabrice via PacketFence-users <
>>>> [email protected]> wrote:
>>>>
>>>>> Hello Joshua,
>>>>>
>>>>> let's run that:
>>>>>
>>>>> raddebug -f /usr/local/pf/var/run/radiusd.sock -t 3600 -c '(
>>>>> Calling-Station-Id =~ /78[-:]?4f[-:]?43[-:]?97[-:]?f5[-:]?fe/i )'
>>>>>
>>>>>
>>>>> And paste the output.
>>>>>
>>>>> Regards
>>>>>
>>>>> Fabrice
>>>>>
>>>>>
>>>>> Le 21-03-26 à 18 h 22, Joshua Wise via PacketFence-users a écrit :
>>>>>
>>>>> RADIUS Reply is empty.
>>>>>
>>>>> I ran the specified patch, restarted services, same error.
>>>>>
>>>>> *Joshua Wise*
>>>>> Systems Engineer, Celina ISD
>>>>> 469-742-9113
>>>>> https://www.celinaisd.com
>>>>>
>>>>>
>>>>> On Fri, Mar 26, 2021 at 1:47 PM Ludovic Zammit <[email protected]>
>>>>> wrote:
>>>>>
>>>>>> I never seen that error message.
>>>>>>
>>>>>> It needs more investigation.
>>>>>>
>>>>>> What is the radius reply given by pf for that authentication ? Just
>>>>>> below the radius request.
>>>>>>
>>>>>> Did you patch your server with :
>>>>>>
>>>>>> /usr/local/pf/addons/pf-maint.pl
>>>>>>
>>>>>> Then restart all pf services:
>>>>>>
>>>>>> /usr/local/pf/bin/pfcmd service pf restart
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> Ludovic [email protected] ::  +1.514.447.4918 (x145) ::  
>>>>>> www.inverse.ca
>>>>>> Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence 
>>>>>> (http://packetfence.org)
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Mar 26, 2021, at 2:24 PM, Joshua Wise <[email protected]>
>>>>>> wrote:
>>>>>>
>>>>>> RADIS Request Audit log:
>>>>>>
>>>>>> NAS-Port-Type = Wireless-802.11 PacketFence-Outer-User = "
>>>>>> [email protected]" PacketFence-Radius-Ip = "10.56.64.44"
>>>>>> Service-Type = Framed-User Called-Station-Id = 
>>>>>> "00-1A-1E-01-EC-98-cisd.1x"
>>>>>> State = 0x6f17c8406f1fd21550a9f72c8da28ab6 FreeRADIUS-Proxied-To =
>>>>>> 127.0.0.1 Realm = "default" NAS-IP-Address = 10.56.64.44
>>>>>> PacketFence-NTLMv2-Only = "" Calling-Station-Id = "78:4f:43:97:f5:fe"
>>>>>> Aruba-Essid-Name = "cisd.1x" PacketFence-KeyBalanced =
>>>>>> "e779e78c1ea9a92dab5dc5d6d30a8dc7" PacketFence-Domain = "celinaisd"
>>>>>> Aruba-AP-Group = "CS701" User-Name = "[email protected]"
>>>>>> Aruba-Location-Id = "ADMIN-MDF-AP16" NAS-Identifier = "10.56.64.222"
>>>>>> Event-Timestamp = "Mar 25 2021 08:33:08 CDT" EAP-Message =
>>>>>> 0x020800511a0208004c316ec62dd3023b6ff16890ed459e79818b0000000000000000175ed1760cce67ff48491f88d067ce8bc17ec36c65b75de60074657374776966694063656c696e616973642e636f6d
>>>>>> Stripped-User-Name = "testwifi" NAS-Port = 0 Framed-MTU = 1100 EAP-Type =
>>>>>> MSCHAPv2 PacketFence-UserNameAttribute = "[email protected]"
>>>>>> Module-Failure-Message = "celinaisd: Attribute \"User-Password\" is
>>>>>> required for authentication" User-Password = "******" SQL-User-Name = "
>>>>>> [email protected]"
>>>>>>
>>>>>> *Joshua Wise*
>>>>>> Systems Engineer, Celina ISD
>>>>>> 469-742-9113
>>>>>> https://www.celinaisd.com
>>>>>>
>>>>>>
>>>>>> On Fri, Mar 26, 2021 at 12:12 PM Ludovic Zammit <[email protected]>
>>>>>> wrote:
>>>>>>
>>>>>>> For that radius request, go check Auditing and show me the radius
>>>>>>> request.
>>>>>>> Thanks,
>>>>>>>
>>>>>>>
>>>>>>> Ludovic Zammit
>>>>>>> [email protected] ::  +1.514.447.4918 (x145) ::  www.inverse.ca
>>>>>>> Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and 
>>>>>>> PacketFence (http://packetfence.org)
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Mar 26, 2021, at 8:43 AM, Joshua Wise <[email protected]>
>>>>>>> wrote:
>>>>>>>
>>>>>>> Here we go:
>>>>>>>
>>>>>>> Mar 26 07:40:11 packetfence auth[2770]: (10350)   Login incorrect
>>>>>>> (celinaisd: Attribute "User-Password" is required for authentication): [
>>>>>>> [email protected]] (from client 10.56.64.222/32 port 0 cli
>>>>>>> 78:4f:43:97:f5:fe via TLS tunnel)
>>>>>>> Mar 26 07:40:11 packetfence auth[2770]: [mac:78:4f:43:97:f5:fe]
>>>>>>> Rejected user: [email protected]
>>>>>>> Mar 26 07:40:11 packetfence auth[2770]: (10351) Login incorrect
>>>>>>> (eap_peap: The users session was previously rejected: returning reject
>>>>>>> (again.)): [[email protected]] (from client 10.56.64.222/32
>>>>>>> port 0 cli 78:4f:43:97:f5:fe)
>>>>>>>
>>>>>>> *Joshua Wise*
>>>>>>> Systems Engineer, Celina ISD
>>>>>>> 469-742-9113
>>>>>>> https://www.celinaisd.com
>>>>>>>
>>>>>>>
>>>>>>> On Fri, Mar 26, 2021 at 7:00 AM Ludovic Zammit <[email protected]>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> That’s not good, you should have something in the log related to
>>>>>>>> that Mac address. Try another computer or clear the cache info related 
>>>>>>>> to
>>>>>>>> your Mac in the wifi controller.
>>>>>>>>
>>>>>>>> Check:
>>>>>>>>
>>>>>>>> grep MAC_ADDRESS /usr/local/pf/logs/radius.log
>>>>>>>>
>>>>>>>> Use 00:11:22:33:44:55 for the Mac address format.
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>>
>>>>>>>>
>>>>>>>> Ludovic Zammit
>>>>>>>> [email protected] ::  +1.514.447.4918 (x145) ::  www.inverse.ca
>>>>>>>> Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and 
>>>>>>>> PacketFence (http://packetfence.org)
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Mar 25, 2021, at 2:20 PM, Joshua Wise <[email protected]>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>> I don't get a response when using that command. I can see the log
>>>>>>>> file exists, modifying with vi shows the following repeatedly.
>>>>>>>>
>>>>>>>> Mar 25 03:52:58 packetfence packetfence: pfperl-api(2202) INFO:
>>>>>>>> Using 300 resolution threshold (pf::pfcron::task::cluster_check::run)
>>>>>>>> Mar 25 03:52:58 packetfence packetfence: pfperl-api(2202) INFO: All
>>>>>>>> cluster members are running the same configuration version
>>>>>>>> (pf::pfcron::task::cluster_check::run)
>>>>>>>> Mar 25 03:52:58 packetfence packetfence: pfperl-api(2204) INFO:
>>>>>>>> processed 0 security_events during security_event maintenance
>>>>>>>> (1616662378.2789 1616662378.28441)
>>>>>>>> (pf::security_event::security_event_maintenance)
>>>>>>>> Mar 25 03:52:58 packetfence packetfence: pfperl-api(2204) INFO:
>>>>>>>> processed 0 security_events during security_event maintenance
>>>>>>>> (1616662378.2855 1616662378.2874)
>>>>>>>> (pf::security_event::security_event_maintenance)
>>>>>>>> Mar 25 03:53:58 packetfence packetfence: pfperl-api(2204) INFO:
>>>>>>>> Using 300 resolution threshold (pf::pfcron::task::cluster_check::run)
>>>>>>>>
>>>>>>>> *Joshua Wise*
>>>>>>>> Systems Engineer, Celina ISD
>>>>>>>> 469-742-9113
>>>>>>>> https://www.celinaisd.com
>>>>>>>>
>>>>>>>>
>>>>>>>> On Thu, Mar 25, 2021 at 10:08 AM Ludovic Zammit <[email protected]>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> Give me the output of:
>>>>>>>>>
>>>>>>>>> grep MAC_ADDRESS /usr/local/pf/logs/packetfence.log
>>>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Ludovic Zammit
>>>>>>>>> [email protected] ::  +1.514.447.4918 (x145) ::  www.inverse.ca
>>>>>>>>> Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and 
>>>>>>>>> PacketFence (http://packetfence.org)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Mar 25, 2021, at 8:39 AM, Joshua Wise <[email protected]>
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>> SSID type is 802.1x with WPA2-Enterprise.
>>>>>>>>>
>>>>>>>>> *Joshua Wise*
>>>>>>>>> Systems Engineer, Celina ISD
>>>>>>>>> 469-742-9113
>>>>>>>>> https://www.celinaisd.com
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Thu, Mar 25, 2021 at 7:08 AM Ludovic Zammit <[email protected]>
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> Hello,
>>>>>>>>>>
>>>>>>>>>> What’s your SSID type ? Open SSID or 8021.x with WPA2 Entreprise?
>>>>>>>>>>
>>>>>>>>>> Thanks,
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Ludovic Zammit
>>>>>>>>>> [email protected] ::  +1.514.447.4918 (x145) ::  www.inverse.ca
>>>>>>>>>> Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and 
>>>>>>>>>> PacketFence (http://packetfence.org)
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Mar 24, 2021, at 3:06 PM, Joshua Wise via PacketFence-users <
>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>
>>>>>>>>>> I'm in the process of testing Packefence with our Aruba
>>>>>>>>>> Controller. I've added our on-prem Active Directory to Packetfence, 
>>>>>>>>>> and can
>>>>>>>>>> test authentication fine with pftest, no issues.
>>>>>>>>>>
>>>>>>>>>> I've configured our Aruba Controller with an 802.1x SSID, RADIUS,
>>>>>>>>>> etc.
>>>>>>>>>>
>>>>>>>>>> When I attempt to connect with username/password, it fails. I can
>>>>>>>>>> see in the RADIUS log that I get an error "Attribute "User-Password" 
>>>>>>>>>> is
>>>>>>>>>> required for authentication."
>>>>>>>>>>
>>>>>>>>>> Within that log, I can go to the RADIUS section and see:
>>>>>>>>>> User-Password = "******"
>>>>>>>>>>
>>>>>>>>>> This makes me think the password is being passed from our
>>>>>>>>>> Controller to Packetfence just fine.
>>>>>>>>>>
>>>>>>>>>> Not sure what I'm missing, any ideas or suggestions?
>>>>>>>>>>
>>>>>>>>>> *Joshua Wise*
>>>>>>>>>> Systems Engineer, Celina ISD
>>>>>>>>>> 469-742-9113
>>>>>>>>>> https://www.celinaisd.com
>>>>>>>>>> _______________________________________________
>>>>>>>>>> PacketFence-users mailing list
>>>>>>>>>> [email protected]
>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> PacketFence-users mailing 
>>>>> [email protected]https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>>>>
>>>>> _______________________________________________
>>>>> PacketFence-users mailing list
>>>>> [email protected]
>>>>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> PacketFence-users mailing 
>>>> [email protected]https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>>>
>>>> _______________________________________________
>>>> PacketFence-users mailing list
>>>> [email protected]
>>>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>>>
>>>
>>>
>>> _______________________________________________
>>> PacketFence-users mailing 
>>> [email protected]https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>>
>>> --
>>> Fabrice [email protected] ::  +1.514.447.4918 (x135) ::  
>>> www.inverse.ca
>>> Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence 
>>> (http://packetfence.org)
>>>
>>> _______________________________________________
>>> PacketFence-users mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>>
>> --
>> Fabrice [email protected] ::  +1.514.447.4918 (x135) ::  
>> www.inverse.ca
>> Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence 
>> (http://packetfence.org)
>>
>> --
> Fabrice [email protected] ::  +1.514.447.4918 (x135) ::  www.inverse.ca
> Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence 
> (http://packetfence.org)
>
>
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to