Hello Fabrice,thanks for the response. I will try.
thanksD.
Il venerdì 2 aprile 2021, 17:41:54 CEST, Fabrice Durand via
PacketFence-users <[email protected]> ha scritto:
Hello doppino,
yes you can use SNMP and active directory but for that you will need to use the
portal to authenticate.
Be sure on the packetfence side to enable the packetfence-snmptrapd.service
(it's disabled by default).
Then add the switch in packetfence and fill the correct registration vlan and
snmp information to be able to talk to the switch.
Regards
Fabrice
Le 2021-04-01 à 10 h 07, doppino--- via PacketFence-users a écrit :
Hello, I'm new to Packetfence and NAC. I'm implementing PF in a lab
environment to test and learn. I'm tryng to setup an out of band architecture
as described here:
https://www.packetfence.org/doc/PacketFence_Installation_Guide.html#_supported_enforcement_modes
with a cisco 2960 switch. In this phase is not clear to me if I can use only
SNMP and Active Directory user credential without 802.1x for assign vlan and
give access to the network.
thanks D.
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
--
Fabrice Durand
[email protected] :: +1.514.447.4918 (x135) :: www.inverse.ca
Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence
(http://packetfence.org) _______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users