Hi. We are running PacketFence 13.2.0 and we use MAB in order to authenticate clients. We need to achieve the following setup. 1 - a client connect to a network switch and switch authenticates the client using MAB 2 - PacketFence places the client into registration VLAN where the client gets IP from PacketFence 3 - based on VLAN filters, PacketFence moves the client from registration VLAN to normal VLAN Our issue is that PacketFence does not move a client to normal VLAN upon registration. However, when we reevaluate access manually from 'Nodes' menu (or disable and enable port connected to the client on a switch), the client is being moved to normal VLAN. We have network switches set as SNMP switch type because network switches probably do not support RADIUS CoA to reevaluate access and we must use SNMP to perform SNMP up/down. Below is the switches.conf file. #switches.conf [10.0.1.230] radiusSecret=secret group=Aruba deauthMethod=SNMP [group Aruba] description=Aruba type=PacketFence::SNMP SNMPCommunityTrap=xxxxx SNMPVersion=2c SNMPCommunityWrite=xxxxx SNMPCommunityRead=xxxxx SNMPVersionTrap=2c VLAN90Vlan=90 VLAN130Vlan=130 REGISTRATIONVlan=198 VLAN136Vlan=136 isolationVlan=199 registrationVlan=198 VLAN20Vlan=20 VoIPDHCPDetect=N uplink_dynamic=static What can we do to move clients to normal VLAN automatically by PacketFence? Any help will be appreciated. Regards, o2 Team
_______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
