Ant to rcvr are 150 ft ~ 50m, no? On Friday, February 6, 2015, Matt Dexter <[email protected]> wrote:
> RX to bulkhead cables > SMAM-LMR240-SMAM-50-CT1 > www.fieldcomponents.com > > SMA Straight Male Crimp Plug on LMR240 to SMA Straight > Male Plug 50 Feet Long > Connectors will be Passivated Stainless Steel > Rubber caps will be put on the ends of the SMA Connectors > Labels will be black shrink with white lettering on the 256 > cables that require labels. Labeled on Both Ends > The last 32 cables will have a > white blank label on both ends of the cable > VSWR 1.35:1 at 4 Ghz > > LMR240 is 1.21ns/ft > 1.21 * 50 = 60.5 ns one way. > > On Fri, 6 Feb 2015, Chris Carilli wrote: > > Date: Fri, 06 Feb 2015 08:37:56 -0700 >> From: Chris Carilli <[email protected]> >> To: [email protected] >> Subject: Re: memo on PAPER 128 autocorrelations >> >> 6MHz = 50m reflection. what in the system is 25m or 50M round trip? >> cables from receivorator to bulkhead? >> >> cc >> >> >> >> On 02/05/2015 01:55 PM, Jonathan Pober wrote: >> >>> Hi everyone, >>> >>> I had a little bit of time today to do some writing, and so jotted down >>> some of the things we noticed looking at the PSA 128 data back in January. >>> There are two sections: (1) looking at a 6 MHz ripple that now shows up in >>> all of our autocorrelation spectra, and (2) looking into Omnical's ability >>> to identify and flag antennas on an initial run. I'm sending this email to >>> the PAPER list, but since this is essentially the exact hardware that will >>> become HERA in 2 months, this may make sense as a HERA memo. I leave it to >>> the powers that be to decide. >>> >>> Jonnie >>> >> >> >> >> > -- Sent from Gmail Mobile
