Ok, looking at the superbuild. I'm behind a firewall, so all git commands need to be over http:// rather than git://
Which makefile can I mod this path in? [ 90%] Performing download step (git clone) for 'paraview' Initialized empty Git repository in /cfd/software/ParaView/ParaView-3.14.1-SuperBuild/build/paraview/src/paraview/.git/ error: RPC failed; result=22, HTTP code = 407 Regards, Joseph David Borġ http://www.jdborg.com On 24 October 2012 16:01, Utkarsh Ayachit <utkarsh.ayac...@kitware.com>wrote: > This include libXt.so and include files such as > /usr/include/X11/Core.h. On debian-based systems, it's available as > the package "libxt-dev". Also you can try the nightly binaries > directly, if you don't want to build from source. The instructions to > download the binaries are: > http://paraview.org/Wiki/ParaView/Superbuild#Obtaining_the_source > > On Wed, Oct 24, 2012 at 10:47 AM, Joe Borġ <m...@jdborg.com> wrote: > > Hi guys, sorry to keep finding problems, but I'm stuck here: > > > > X11_Xt_LIB could not be found. Required for VTK X lib. > > > > Can you give me an example of a lib that should be in there so I can > search > > for that to get the dir please? > > > > > > > > Regards, > > Joseph David Borġ > > http://www.jdborg.com > > > > > > On 23 October 2012 13:55, Utkarsh Ayachit <utkarsh.ayac...@kitware.com> > > wrote: > >> > >> Joe, > >> > >> Use the latest revision of the wiki page to build the source from > >> git-master (http://paraview.org/Wiki/ParaView:Build_And_Install). > >> > >> Utkarsh > >> > >> On Tue, Oct 23, 2012 at 7:18 AM, Joe Borġ <m...@jdborg.com> wrote: > >> > Thanks for the info Leo, > >> > > >> > I am, however, having trouble building the source that I've > downloaded. > >> > > >> > Could you point me to any instructions on how to build? > >> > > >> > > http://paraview.org/Wiki/index.php?title=ParaView:Build_And_Install&oldid=46445#On_Unix-like_operating_systems_2 > >> > doesn't seem to tie up with the files I get. > >> > > >> > These are the files I've pulled from Git: > >> > > >> > -rw-r--r-- 1 joe.borg root 364 Oct 23 09:43 > >> > ParaViewConfigVersion.cmake.in > >> > -rw-r--r-- 1 joe.borg root 2.6K Oct 23 09:43 ParaViewConfig.cmake.in > >> > -rw-r--r-- 1 joe.borg root 15K Oct 23 09:43 License_v1.2.txt > >> > -rw-r--r-- 1 joe.borg root 583 Oct 23 09:43 DartConfig.cmake > >> > -rw-r--r-- 1 joe.borg root 539 Oct 23 09:43 CTestConfig.cmake > >> > -rw-r--r-- 1 joe.borg root 24K Oct 23 09:43 CMakeLists.txt > >> > -rw-r--r-- 1 joe.borg root 3.2K Oct 23 09:43 vtkPVConfig.h.in > >> > -rw-r--r-- 1 joe.borg root 5.0K Oct 23 09:43 cave.pvx > >> > drwxr-xr-x 5 joe.borg root 4.0K Oct 23 09:54 Examples/ > >> > drwxr-xr-x 26 joe.borg root 4.0K Oct 23 09:55 Plugins/ > >> > drwxr-xr-x 13 joe.borg root 4.0K Oct 23 09:56 Utilities/ > >> > drwxr-xr-x 2 joe.borg root 12K Oct 23 09:56 CMake/ > >> > drwxr-xr-x 11 joe.borg root 12K Oct 23 09:56 SuperBuild/ > >> > drwxr-xr-x 5 joe.borg root 4.0K Oct 23 09:56 CoProcessing/ > >> > drwxr-xr-x 2 joe.borg root 4.0K Oct 23 09:56 CommandLineExecutables/ > >> > drwxr-xr-x 4 joe.borg root 4.0K Oct 23 09:56 Wrapping/ > >> > drwxr-xr-x 3 joe.borg root 4.0K Oct 23 09:56 Common/ > >> > drwxr-xr-x 7 joe.borg root 4.0K Oct 23 09:57 Qt/ > >> > drwxr-xr-x 24 joe.borg root 8.0K Oct 23 10:01 VTK/ > >> > drwxr-xr-x 5 joe.borg root 4.0K Oct 23 10:01 ThirdParty/ > >> > drwxr-xr-x 9 joe.borg root 4.0K Oct 23 10:02 ParaViewCore/ > >> > drwxr-xr-x 3 joe.borg root 4.0K Oct 23 10:02 Applications/ > >> > > >> > Thanks. > >> > > >> > > >> > Regards, > >> > Joseph David Borġ > >> > http://www.jdborg.com > >> > > >> > > >> > On 19 October 2012 21:43, Yuanxin Liu <leo....@kitware.com> wrote: > >> >> > >> >> Hi, Joe, > >> >> Berk reminded me that Andy Bauer has put in some fixes for gradient > >> >> interpolation for pyramids (5a7dc931c54d868). Since your data > contain > >> >> pyramids, this is quite likely the fix for this bug. > >> >> Leo > >> >> > >> >> On Fri, Oct 19, 2012 at 12:05 PM, Yuanxin Liu <leo....@kitware.com> > >> >> wrote: > >> >>> > >> >>> Hi, Joe, > >> >>> It looks like this was indeed a bug in 3.14.1 but the bug has been > >> >>> fixed in the current development branch. I am not entirely sure > which > >> >>> commit > >> >>> explicitly did it. > >> >>> > >> >>> Leo > >> >>> > >> >>> On Fri, Oct 19, 2012 at 5:54 AM, Joe Borġ <m...@jdborg.com> wrote: > >> >>>> > >> >>>> Hi, > >> >>>> > >> >>>> I am using 3.14.1 64-bit on a single core (if I enable multi-core, > it > >> >>>> becomes very unstable). > >> >>>> > >> >>>> Adding tets to this small case works, but I've got a bigger duct > with > >> >>>> a > >> >>>> more refined mesh and adding tets don't fix the problem (make it > >> >>>> better > >> >>>> though). > >> >>>> > >> >>>> See attached PVSM. > >> >>>> > >> >>>> > >> >>>> > >> >>>> Regards, > >> >>>> Joseph David Borġ > >> >>>> http://www.jdborg.com > >> >>>> > >> >>>> > >> >>>> On 18 October 2012 19:00, Yuanxin Liu <leo....@kitware.com> wrote: > >> >>>>> > >> >>>>> No, I did not use Tetrahedralize. > >> >>>>> > >> >>>>> Are you using the lastest development version? Are you running > >> >>>>> paraview as a single process? > >> >>>>> > >> >>>>> Do you mind saving a state file of your session and post it? > >> >>>>> > >> >>>>> thanks! > >> >>>>> > >> >>>>> Leo > >> >>>>> > >> >>>>> > >> >>>>> > >> >>>>> On Thu, Oct 18, 2012 at 4:31 AM, Joe Borġ <m...@jdborg.com> > wrote: > >> >>>>>> > >> >>>>>> Hi Leo, > >> >>>>>> > >> >>>>>> You don't seem to have used the Tetrahedralise filter? How have > >> >>>>>> you > >> >>>>>> got this to work without that? > >> >>>>>> > >> >>>>>> Mine works fine after setting the fluid as input and source as > the > >> >>>>>> inlet, but I must first use the Tetrahedralise filter. > >> >>>>>> > >> >>>>>> > >> >>>>>> Regards, > >> >>>>>> Joseph David Borġ > >> >>>>>> http://www.jdborg.com > >> >>>>>> > >> >>>>>> > >> >>>>>> On 17 October 2012 18:14, Yuanxin Liu <leo....@kitware.com> > wrote: > >> >>>>>>> > >> >>>>>>> Hi Joe, > >> >>>>>>> > >> >>>>>>> I am not seeing exactly what you are seeing. In the attached > >> >>>>>>> image > >> >>>>>>> produced with the current master, I created a stream tracer with > >> >>>>>>> outlet > >> >>>>>>> block as the seeds and the fluid block as the input, and the > >> >>>>>>> streamlines > >> >>>>>>> seem right. > >> >>>>>>> > >> >>>>>>> But I think there is a bug in how the stream tracer handles > >> >>>>>>> multiblock data, because if I change the stream tracer input to > >> >>>>>>> the whole > >> >>>>>>> pipe data set, instead of just the fluid block, some stream > lines > >> >>>>>>> go > >> >>>>>>> straight to the void like you described. > >> >>>>>>> > >> >>>>>>> Can you try setting up the pipeline as I did using ExtractBlock > >> >>>>>>> and > >> >>>>>>> compare with my image? > >> >>>>>>> > >> >>>>>>> Leo > >> >>>>>>> > >> >>>>>>> On Wed, Oct 17, 2012 at 10:51 AM, Magician <f_magic...@mac.com> > >> >>>>>>> wrote: > >> >>>>>>>> > >> >>>>>>>> Hi Joe, > >> >>>>>>>> > >> >>>>>>>> > >> >>>>>>>> "Tetrahedralize" filter is applicable. > >> >>>>>>>> All cells are splitted into Tetrahedral ones. > >> >>>>>>>> Try it. > >> >>>>>>>> > >> >>>>>>>> > >> >>>>>>>> Magician > >> >>>>>>>> > >> >>>>>>>> > >> >>>>>>>> On 2012/10/17, at 23:40, Joe Borġ wrote: > >> >>>>>>>> > >> >>>>>>>> > Thanks Magician, > >> >>>>>>>> > > >> >>>>>>>> > Thanks for testing. What are you using to convert to tet? > Is > >> >>>>>>>> > it > >> >>>>>>>> > a ParaView feature? > >> >>>>>>>> > > >> >>>>>>>> > Leo, can the priority of the bug be raised please? > >> >>>>>>>> > > >> >>>>>>>> > > >> >>>>>>>> > Regards, > >> >>>>>>>> > Joseph David Borġ > >> >>>>>>>> > http://www.jdborg.com > >> >>>>>>>> > > >> >>>>>>>> > > >> >>>>>>>> > On 17 October 2012 14:20, Magician <f_magic...@mac.com> > wrote: > >> >>>>>>>> > Hi Joseph, > >> >>>>>>>> > > >> >>>>>>>> > > >> >>>>>>>> > I tried your data and got a result as yours. > >> >>>>>>>> > Your data only includes Hex, Wedge, Tet and Pyramid, > >> >>>>>>>> > but streamlines are stopped earlier. > >> >>>>>>>> > > >> >>>>>>>> > Same as my polyhedral pipe sample, I applied Tetrahedralize > >> >>>>>>>> > filter > >> >>>>>>>> > to your pipe source, and I could get valid streamlines. > >> >>>>>>>> > > >> >>>>>>>> > > >> >>>>>>>> > Magician > >> >>>>>>>> > > >> >>>>>>>> > > >> >>>>>>>> > > Pipe.tar.gz attached to the bug report below, in the form > of > >> >>>>>>>> > > an > >> >>>>>>>> > > Ensight > >> >>>>>>>> > > Case. First extract the archive and to open in Paraview, > use > >> >>>>>>>> > > "All files > >> >>>>>>>> > > (*)" when browsing and select the .encas, then select > >> >>>>>>>> > > "EnSight > >> >>>>>>>> > > Files". > >> >>>>>>>> > > > >> >>>>>>>> > > > >> >>>>>>>> > > Regards, > >> >>>>>>>> > > Joseph David Borġ > >> >>>>>>>> > > http://www.jdborg.com > >> >>>>>>>> > > > >> >>>>>>>> > > > >> >>>>>>>> > > On 12 October 2012 03:28, Yuanxin Liu <leo.liu at > >> >>>>>>>> > > kitware.com> > >> >>>>>>>> > > wrote: > >> >>>>>>>> > > > >> >>>>>>>> > > > Hi, > >> >>>>>>>> > > > Is it possible for you to upload the data? By the > way, > >> >>>>>>>> > > > if > >> >>>>>>>> > > > the cell > >> >>>>>>>> > > > type is polyhedron, then this is quite likely the same > bug > >> >>>>>>>> > > > as > >> >>>>>>>> > > > this: > >> >>>>>>>> > > > http://paraview.org/Bug/view.php?id=13442 > >> >>>>>>>> > > > > >> >>>>>>>> > > > Leo > >> >>>>>>>> > > > > >> >>>>>>>> > > > On Thu, Oct 11, 2012 at 6:17 AM, Joe Borġ <mail at > >> >>>>>>>> > > > jdborg.com> > >> >>>>>>>> > > > wrote: > >> >>>>>>>> > > > > >> >>>>>>>> > > >> Hi guys, > >> >>>>>>>> > > >> > >> >>>>>>>> > > >> I've got an odd issue with the stream trace and stream > >> >>>>>>>> > > >> trace > >> >>>>>>>> > > >> custom > >> >>>>>>>> > > >> source filters in Paraview (3.14.1 64bit). No matter > what > >> >>>>>>>> > > >> settings I use, > >> >>>>>>>> > > >> the traces die off very soon and some even carry on > >> >>>>>>>> > > >> straight > >> >>>>>>>> > > >> (even when > >> >>>>>>>> > > >> there's no fluid). > >> >>>>>>>> > > >> > >> >>>>>>>> > > >> See the two screenshots I've got from Paraview. > >> >>>>>>>> > > >> > >> >>>>>>>> > > >> http://jdborg.com/images/paraview/pv_inlet.png > >> >>>>>>>> > > >> http://jdborg.com/images/paraview/pv_outlet.png > >> >>>>>>>> > > >> > >> >>>>>>>> > > >> > >> >>>>>>>> > > >> Not sure if this is a setting that's easy to miss or if > >> >>>>>>>> > > >> it's > >> >>>>>>>> > > >> more > >> >>>>>>>> > > >> terminal. > >> >>>>>>>> > > >> > >> >>>>>>>> > > >> Thanks, > >> >>>>>>>> > > >> > >> >>>>>>>> > > >> > >> >>>>>>>> > > >> Regards, > >> >>>>>>>> > > >> Joseph David Borġ > >> >>>>>>>> > > >> http://www.jdborg.com > >> >>>>>>>> > > >> >>>>>>>> > >> >>>>>>> > >> >>>>>> > >> >>>>> > >> >>>> > >> >>> > >> >> > >> > > >> > > >> > _______________________________________________ > >> > Powered by www.kitware.com > >> > > >> > Visit other Kitware open-source projects at > >> > http://www.kitware.com/opensource/opensource.html > >> > > >> > Please keep messages on-topic and check the ParaView Wiki at: > >> > http://paraview.org/Wiki/ParaView > >> > > >> > Follow this link to subscribe/unsubscribe: > >> > http://www.paraview.org/mailman/listinfo/paraview > >> > > > > > >
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview