Hi Utkarsh, thank you for the Python script. Having never used Python scripts in ParaView before, I have difficulties to run it. When I open the Python shell and try to launch the script with the "Run Script" button, I get an error message saying:
Traceback (most recent call last): File "<string>", line 19, in <module> NameError: name 'GetActiveSource' is not defined I use ParaView 4.0.1 under Windows 7. I have added the lib directory of ParaView to my path, as it says in the ParaView Python documentation. Is there anything else I need to do to run the script? When I load it as a macro, the corresponding button appears, but when I click on it, nothing seems to happen. I have tested it with a pvd time collection where I have commented out the last timestep. When I loaded it, all timesteps but the last one were visible. Then I removed the comment marks around in the last timestep in the pvd file and lauched the Refresh Reader macro. I would expect that now the last timestep in the pvd would be visible, but it wasn't. You said that the reader to reload should be the active reader. How do I see which reader is the active one? The pvd collection was highlighted when I activated the macro. Do I have to do something else? Thanks, Matthias > -----Ursprüngliche Nachricht----- > Von: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com] > Gesendet: Sonntag, 21. September 2014 16:17 > An: Zenker, Dr. Matthias > Cc: Cory Quammen; paraview@paraview.org > Betreff: Re: [Paraview] How to simply "Reload" a data file > > Matthias, > > Attached is the Python script that reloads a file-series. You can import this > as > a macro or just run it from the Python shell. In either case, ensure that the > reader to reload is the active reader. > > Utkarsh > > > On Thu, Sep 18, 2014 at 9:34 AM, Zenker, Dr. Matthias > <matthias.zen...@erbe-med.com> wrote: > > OK - but don't forget that the weekend is also there to have some free > > time... ;) > > > > Matthias > > > >> -----Ursprüngliche Nachricht----- > >> Von: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com] > >> Gesendet: Donnerstag, 18. September 2014 14:46 > >> An: Zenker, Dr. Matthias > >> Cc: Cory Quammen; paraview@paraview.org > >> Betreff: Re: [Paraview] How to simply "Reload" a data file > >> > >> Sorry, didn't get around to it yet. Over this weekend is more likely, > >> since I am tracking down some last minute issues with 4.2 right now. > >> > >> Utkarsh > >> > >> On Thu, Sep 18, 2014 at 3:33 AM, Zenker, Dr. Matthias > >> <matthias.zen...@erbe-med.com> wrote: > >> > Hi Utkarsh, > >> > > >> > any news regarding a reload data function (see below)? > >> > > >> > Matthias > >> > > >> >> -----Ursprüngliche Nachricht----- > >> >> Von: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com] > >> >> Gesendet: Montag, 15. September 2014 16:50 > >> >> An: Zenker, Dr. Matthias > >> >> Cc: Cory Quammen; paraview@paraview.org > >> >> Betreff: Re: [Paraview] How to simply "Reload" a data file > >> >> > >> >> Ah. since it's a file series, it would not work the way Cory is > >> >> suggesting. I'll see if I can cook up a Python script that can > >> >> make this possible for now. We're putting this on the roadmap for > >> >> the next release (I know I've said that a few times in the past :) ). > >> >> > >> >> Utkarsh > >> >> > >> >> On Mon, Sep 15, 2014 at 10:31 AM, Zenker, Dr. Matthias > >> >> <matthias.zen...@erbe-med.com> wrote: > >> >> > Normally I load a time series, either a series of vtu files or a > >> >> > time collection > >> >> (pvd file containing the vtu file names with asociated timestamps). > >> >> During the simulation, new files are added to the series. So it > >> >> would be nice to watch the simulation going on by reloading from time > to time. > >> >> > > >> >> > Matthias > >> >> > > >> >> >> -----Ursprüngliche Nachricht----- > >> >> >> Von: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com] > >> >> >> Gesendet: Montag, 15. September 2014 16:28 > >> >> >> An: Zenker, Dr. Matthias > >> >> >> Cc: Cory Quammen; paraview@paraview.org > >> >> >> Betreff: Re: [Paraview] How to simply "Reload" a data file > >> >> >> > >> >> >> I suspect will not work with vtu. To understand this better, > >> >> >> what is that which is changing that you need to reload the > >> >> >> file? Are you loading a file series or a single file? > >> >> >> > >> >> >> Utkarsh > >> >> >> > >> >> >> On Mon, Sep 15, 2014 at 9:54 AM, Zenker, Dr. Matthias > >> >> >> <matthias.zen...@erbe-med.com> wrote: > >> >> >> > Hi Cory, > >> >> >> > > >> >> >> > I use the reader for vtu format and pvd (vtu time > >> >> >> > collection). I tried to > >> >> >> modify the xml as follows: > >> >> >> > > >> >> >> > <ParaViewPlugin> > >> >> >> > <ServerManagerConfiguration> > >> >> >> > <ProxyGroup name="sources"> <SourceProxy > name="VTUrefresh" > >> >> >> > base_proxygroup="sources" > >> >> >> base_proxyname="VTUReader" class="vtuReader"> > >> >> >> > <Property name="Refresh" command="Modified" > >> >> >> panel_widget="command_button"/> > >> >> >> > <Hints> > >> >> >> > <ReaderFactory extensions="vtu pvd" > >> >> >> > file_description="vtu Reader > >> >> >> (Refresh button)" /> > >> >> >> > </Hints> > >> >> >> > </SourceProxy> > >> >> >> > </ProxyGroup> > >> >> >> > </ServerManagerConfiguration> > >> >> >> > <ParaViewReaders> > >> >> >> > <Reader name="ReaderWithButton" /> > >> >> >> > </ParaViewReaders> > >> >> >> > </ParaViewPlugin> > >> >> >> > > >> >> >> > But I cannot even load it as plugin. Presumably there are > >> >> >> > special keyword to > >> >> >> use for the name of the original reader. Is there a > >> >> >> documentation where I can find more information on that topic? > >> >> >> > > >> >> >> > Thanks, > >> >> >> > > >> >> >> > Matthias > >> >> >> > > >> >> >> >> -----Ursprüngliche Nachricht----- > >> >> >> >> Von: Cory Quammen [mailto:cory.quam...@kitware.com] > >> >> >> >> Gesendet: Montag, 15. September 2014 15:05 > >> >> >> >> An: Zenker, Dr. Matthias > >> >> >> >> Cc: paraview@paraview.org > >> >> >> >> Betreff: Re: [Paraview] How to simply "Reload" a data file > >> >> >> >> > >> >> >> >> Matthias, > >> >> >> >> > >> >> >> >> The method I suggested requires modifying ParaView's source > >> >> >> >> code, so it won't work for a binary distribution. > >> >> >> >> > >> >> >> >> As for the XML method, did you try to load an Xdmf file > >> >> >> >> through what should be the new "Xdmf Reader (Refresh > button)" reader? > >> >> >> >> If you are loading a different type of file, this plugin > >> >> >> >> will have no effect because it provides a Refresh button > >> >> >> >> only for the Xdmf reader. You could modify the XML for other > >> >> >> >> reader types, > >> though. > >> >> >> >> > >> >> >> >> Thanks, > >> >> >> >> Cory > >> >> >> >> > >> >> >> >> On Mon, Sep 15, 2014 at 4:16 AM, Zenker, Dr. Matthias > >> >> >> >> <matthias.zen...@erbe-med.com> wrote: > >> >> >> >> > Hi, > >> >> >> >> > > >> >> >> >> > I wanted to try the "Reload" button which presumably can > >> >> >> >> > be created by > >> >> >> >> one of the methods outlined below. But I am maybe too naive > >> >> >> >> or am missing > >> >> >> >> something: I have a Windoze binary distribution of ParaView > 4.0.1. > >> >> >> >> I did not find the file indicated by Cory, and copying the > >> >> >> >> xml code given by Sébastien into a file and loading that as > >> >> >> >> plugin had no effect > >> >> >> visible to me. > >> >> >> >> > > >> >> >> >> > What am I missing here? > >> >> >> >> > > >> >> >> >> > Thank you, > >> >> >> >> > > >> >> >> >> > Matthias > >> >> >> >> > > >> >> >> >> >> -----Ursprüngliche Nachricht----- > >> >> >> >> >> Von: paraview-boun...@paraview.org [mailto:paraview- > >> >> >> >> >> boun...@paraview.org] Im Auftrag von paraview- > >> >> >> requ...@paraview.org > >> >> >> >> >> Gesendet: Samstag, 15. Juni 2013 18:00 > >> >> >> >> >> An: paraview@paraview.org > >> >> >> >> >> Betreff: Reload a file > >> >> >> >> >> > >> >> >> >> >> Send ParaView mailing list submissions to > >> >> >> >> >> paraview@paraview.org > >> >> >> >> >> > >> >> >> >> >> To subscribe or unsubscribe via the World Wide Web, visit > >> >> >> >> >> http://www.paraview.org/mailman/listinfo/paraview > >> >> >> >> >> or, via email, send a message with subject or body 'help' to > >> >> >> >> >> paraview-requ...@paraview.org > >> >> >> >> >> > >> >> >> >> >> You can reach the person managing the list at > >> >> >> >> >> paraview-ow...@paraview.org > >> >> >> >> >> > >> >> >> >> >> When replying, please edit your Subject line so it is > >> >> >> >> >> more specific than > >> >> >> >> "Re: > >> >> >> >> >> Contents of ParaView digest..." > >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> >> Today's Topics: > >> >> >> >> >> > >> >> >> >> >> 1. Re: How to simply "Reload" a data file (Cory > >> >> >> >> >> Quammen) > >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> >> --------------------------------------------------------- > >> >> >> >> >> --- > >> >> >> >> >> --- > >> >> >> >> >> --- > >> >> >> >> >> --- > >> >> >> >> >> - > >> >> >> >> >> > >> >> >> >> >> Message: 1 > >> >> >> >> >> Date: Fri, 14 Jun 2013 13:42:34 -0400 > >> >> >> >> >> From: Cory Quammen <cquam...@cs.unc.edu> > >> >> >> >> >> Subject: Re: [Paraview] How to simply "Reload" a data > >> >> >> >> >> file > >> >> >> >> >> To: Sebastien Jourdain <sebastien.jourd...@kitware.com> > >> >> >> >> >> Cc: Michael Jackson <mike.jack...@bluequartz.net>, > >> ParaView > >> >> >> >> >> <paraview@paraview.org> > >> >> >> >> >> Message-ID: > >> >> >> >> >> <CANmPiKDegNcAjjRwcVimiGAq3s9j02q7xE- > >> >> >> >> >> oervrsrnbzus...@mail.gmail.com> > >> >> >> >> >> Content-Type: text/plain; charset=ISO-8859-1 > >> >> >> >> >> > >> >> >> >> >> For what it's worth, I just experimented with adding the > >> >> >> >> >> line > >> >> >> >> >> > >> >> >> >> >> <Property name="Refresh" command="Modified" > >> >> >> >> >> panel_widget="command_button"/> > >> >> >> >> >> > >> >> >> >> >> to the CSV reader and XDMF reader in > >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> > >> >> >> > >> >> > >> > ParaView/ParaViewCore/ServerManager/SMApplication/Resources/readers > >> >> >> >> >> .xml > >> >> >> >> >> > >> >> >> >> >> The Refresh button appears among the other property > >> >> >> >> >> widgets and it indeed reloads the data set. > >> >> >> >> >> > >> >> >> >> >> I would happily add this to all the readers and submit a > >> >> >> >> >> patch to gerrit if it would be received well by the core > >> >> >> >> >> ParaView > >> >> developers. > >> >> >> >> >> > >> >> >> >> >> Thanks, > >> >> >> >> >> Cory > >> >> >> >> >> > >> >> >> >> >> On Fri, Jun 14, 2013 at 11:57 AM, Sebastien Jourdain > >> >> >> >> >> <sebastien.jourd...@kitware.com> wrote: > >> >> >> >> >> > BTW that's the correct XML for you, just need to create > >> >> >> >> >> > a file with that in and load it as a plugin and you > >> >> >> >> >> > will have your > >> >> "Refresh" > >> >> >> button. > >> >> >> >> >> > > >> >> >> >> >> > <ParaViewPlugin> > >> >> >> >> >> > <ServerManagerConfiguration> > >> >> >> >> >> > <ProxyGroup name="sources"> <SourceProxy > >> >> >> >> >> > name="XDMFRrefresh" base_proxygroup="sources" > >> >> >> >> >> > base_proxyname="XdmfReader" class="vtkXdmfReader"> > >> >> >> >> >> > <Property name="Refresh" command="Modified" > >> >> >> >> >> > panel_widget="command_button"/> > >> >> >> >> >> > <Hints> > >> >> >> >> >> > <ReaderFactory extensions="xmf xdmf" > >> >> >> >> >> > file_description="Xdmf Reader (Refresh button)" /> > >> >> >> >> >> > </Hints> > >> >> >> >> >> > </SourceProxy> > >> >> >> >> >> > </ProxyGroup> > >> >> >> >> >> > </ServerManagerConfiguration> > >> >> >> >> >> > <ParaViewReaders> > >> >> >> >> >> > <Reader name="ReaderWithButton" /> > >> >> >> >> >> > </ParaViewReaders> > >> >> >> >> >> > </ParaViewPlugin> > >> >> >> >> >> > > >> >> >> >> >> > > >> >> >> >> >> > > >> >> >> >> >> > > >> >> >> >> >> > > >> >> >> >> >> > On Fri, Jun 14, 2013 at 10:27 AM, Sebastien Jourdain > >> >> >> >> >> > <sebastien.jourd...@kitware.com> wrote: > >> >> >> >> >> >> > >> >> >> >> >> >> Another approach could be a python macro that > >> >> >> >> >> >> invalidate the "active/selected' proxy in the > >> >> >> >> >> >> pipeline, but that one will require the usage of ParaView > in built-in mode. > >> >> >> >> >> >> > >> >> >> >> >> >> If interested I can try to write the corresponding > >> >> >> >> >> >> python > >> code... > >> >> >> >> >> >> > >> >> >> >> >> >> Seb > >> >> >> >> >> >> > >> >> >> >> >> >> > >> >> >> >> >> >> On Fri, Jun 14, 2013 at 10:24 AM, Sebastien Jourdain > >> >> >> >> >> >> <sebastien.jourd...@kitware.com> wrote: > >> >> >> >> >> >>> > >> >> >> >> >> >>> I forgot to state the obvious, the plugin is a XML one... > >> >> >> >> >> >>> No code involved... > >> >> >> >> >> >>> > >> >> >> >> >> >>> In fact, just having the XML that I wrote in a file > >> >> >> >> >> >>> extend the UI with a button to refresh the reader > >> >> >> >> >> >>> should be > >> enough. > >> >> >> >> >> >>> Need to figure out why the reader factory did not > >> >> >> >> >> >>> catch up the > >> >> >> hint. > >> >> >> >> >> >>> > >> >> >> >> >> >>> That should be the only thing that you would need. > >> >> >> >> >> >>> > >> >> >> >> >> >>> Seb > >> >> >> >> >> >>> > >> >> >> >> >> >>> > >> >> >> >> >> >>> > >> >> >> >> >> >>> On Fri, Jun 14, 2013 at 10:08 AM, Michael Jackson > >> >> >> >> >> >>> <mike.jack...@bluequartz.net> wrote: > >> >> >> >> >> >>>> > >> >> >> >> >> >>>> I was hoping that ParaView just had something built in. > >> >> >> >> >> >>>> I would rather not have to create a plugin and > >> >> >> >> >> >>>> distribute that along side my own software and to > >> >> >> >> >> >>>> keep up on builds for all the various OS's and all of > >> >> >> >> >> >>>> that. > >> >> >> >> >> >>>> i tried that for a while and I just could not > >> >> >> >> keep up. > >> >> >> >> >> >>>> > >> >> >> >> >> >>>> So either I am the only person who has asked for > >> >> >> >> >> >>>> this or there is some over riding reason in the > >> >> >> >> >> >>>> design of ParView why this type of functionality is not in > ParaView. > >> >> >> >> >> >>>> > >> >> >> >> >> >>>> Thanks > >> >> >> >> >> >>>> > >> >> >> >> >> > >> >> >> >> > >> >> >> > >> >> > >> > __________________________________________________________ > >> >> >> >> >> _ > >> >> >> >> >> >>>> Mike Jackson Principal Software > >> >> >> >> >> >>>> Engineer > >> >> >> >> >> >>>> BlueQuartz Software Dayton, > >> >> >> >> >> >>>> Ohio > >> >> >> >> >> >>>> mike.jack...@bluequartz.net > www.bluequartz.net > >> >> >> >> >> >>>> > >> >> >> >> >> >>>> On Jun 14, 2013, at 3:40 PM, Felipe Bordeu > >> >> >> >> >> >>>> <felipe.bor...@ec-nantes.fr> > >> >> >> >> >> >>>> wrote: > >> >> >> >> >> >>>> > >> >> >> >> >> >>>> > hi you can try the approach of S?bastien > >> >> >> >> >> >>>> > > >> >> >> >> >> >>>> > http://perso.uclouvain.be/sebastien.blaise/tools.h > >> >> >> >> >> >>>> > tml > >> >> >> >> >> >>>> > > >> >> >> >> >> >>>> > I haven't tested yet. > >> >> >> >> >> >>>> > > >> >> >> >> >> >>>> > You can save the code as a macro, so you will have > >> >> >> >> >> >>>> > a > >> button. > >> >> >> >> >> >>>> > > >> >> >> >> >> >>>> > Felipe > >> >> >> >> >> >>>> > > >> >> >> >> >> >>>> > Le 14/06/2013 09:42, Michael Jackson a ?crit : > >> >> >> >> >> >>>> >> Is there button where I can simply reload a data > >> >> >> >> >> >>>> >> file that was read in a pipeline? > >> >> >> >> >> >>>> >> > >> >> >> >> >> >>>> >> We have a workflow where we process data into a > >> >> >> >> >> >>>> >> file and view it in ParaView. it is becoming > >> >> >> >> >> >>>> >> tedious to blow away the entire pipeline just to > >> >> >> >> >> >>>> >> reload the new > >> data. > >> >> >> >> >> >>>> >> > >> >> >> >> >> >>>> >> I know about state files but this still requires > >> >> >> >> >> >>>> >> the user to go to the File->Load State... " menu > >> >> >> >> >> >>>> >> and then select a state > >> >> >> file. > >> >> >> >> >> >>>> >> I would like to just select the data file in the > >> >> >> >> >> >>>> >> Pipeline browser (XDMF File reader for us), and > >> >> >> >> >> >>>> >> just click some button that just reloads data from > the file. > >> >> >> >> >> >>>> >> > >> >> >> >> >> >>>> >> Or am I just missing something? I am using > >> >> >> >> >> >>>> >> ParaView 3.98.1. I have to admit I have not tried > >> >> >> >> >> >>>> >> any of the > >> >> >> >> >> >>>> >> 4.0.RC* > >> >> >> downloads. > >> >> >> >> >> >>>> >> > >> >> >> >> >> >>>> >> Thanks > >> >> >> >> >> >>>> >> > >> >> >> >> >> > >> >> >> >> > >> >> >> > >> >> > >> > _________________________________________________________ > >> >> >> >> >> >>>> >> Mike Jackson > >> >> >> >> >> >>>> >> mike.jack...@bluequartz.net > >> >> >> >> >> >>>> >> BlueQuartz Software > >> >> >> >> >> >>>> >> www.bluequartz.net > >> >> >> >> >> >>>> >> Principal Software Engineer Dayton, > >> >> >> >> >> >>>> >> Ohio > >> >> >> >> >> >>>> >> > >> >> _______________________________________________ > >> >> >> >> >> >>>> >> Powered by www.kitware.com > >> >> >> >> >> >>>> >> > >> >> >> >> >> >>>> >> Visit other Kitware open-source projects at > >> >> >> >> >> >>>> >> > >> http://www.kitware.com/opensource/opensource.html > >> >> >> >> >> >>>> >> > >> >> >> >> >> >>>> >> Please keep messages on-topic and check the > >> >> >> >> >> >>>> >> ParaView Wiki > >> >> >> at: > >> >> >> >> >> >>>> >> http://paraview.org/Wiki/ParaView > >> >> >> >> >> >>>> >> > >> >> >> >> >> >>>> >> Follow this link to subscribe/unsubscribe: > >> >> >> >> >> >>>> >> > http://www.paraview.org/mailman/listinfo/paraview > >> >> >> >> >> >>>> > > >> >> >> >> >> >>>> > > >> >> >> >> >> >>>> > -- > >> >> >> >> >> >>>> > Felipe Bordeu Weldt Ing?nieur de Recherche > >> >> >> >> >> >>>> > ------------------------------------- > >> >> >> >> >> >>>> > T?l. : 33 (0)2 40 37 16 57 Fax. : 33 (0)2 40 74 74 > >> >> >> >> >> >>>> > 06 felipe.bor...@ec-nantes.fr Institut GeM - UMR > >> >> >> >> >> >>>> > CNRS > >> >> >> >> >> >>>> > 6183 ?cole Centrale Nantes > >> >> >> >> >> >>>> > 1 Rue de La No?, 44321 Nantes, FRANCE > >> >> >> >> >> >>>> > ------------------------------------- > >> >> >> >> >> >>>> > > >> >> >> >> >> >>>> > > >> >> _______________________________________________ > >> >> >> >> >> >>>> > Powered by www.kitware.com > >> >> >> >> >> >>>> > > >> >> >> >> >> >>>> > Visit other Kitware open-source projects at > >> >> >> >> >> >>>> > > http://www.kitware.com/opensource/opensource.html > >> >> >> >> >> >>>> > > >> >> >> >> >> >>>> > Please keep messages on-topic and check the > >> >> >> >> >> >>>> > ParaView Wiki > >> >> >> at: > >> >> >> >> >> >>>> > http://paraview.org/Wiki/ParaView > >> >> >> >> >> >>>> > > >> >> >> >> >> >>>> > Follow this link to subscribe/unsubscribe: > >> >> >> >> >> >>>> > http://www.paraview.org/mailman/listinfo/paraview > >> >> >> >> >> >>>> > >> >> >> >> >> >>>> > >> _______________________________________________ > >> >> >> >> >> >>>> Powered by www.kitware.com > >> >> >> >> >> >>>> > >> >> >> >> >> >>>> Visit other Kitware open-source projects at > >> >> >> >> >> >>>> > http://www.kitware.com/opensource/opensource.html > >> >> >> >> >> >>>> > >> >> >> >> >> >>>> Please keep messages on-topic and check the ParaView > >> >> >> >> >> >>>> Wiki > >> >> at: > >> >> >> >> >> >>>> http://paraview.org/Wiki/ParaView > >> >> >> >> >> >>>> > >> >> >> >> >> >>>> Follow this link to subscribe/unsubscribe: > >> >> >> >> >> >>>> http://www.paraview.org/mailman/listinfo/paraview > >> >> >> >> >> >>> > >> >> >> >> >> >>> > >> >> >> >> >> >> > >> >> >> >> >> > > >> >> >> >> >> > > >> >> >> >> >> > > _______________________________________________ > >> >> >> >> >> > Powered by www.kitware.com > >> >> >> >> >> > > >> >> >> >> >> > Visit other Kitware open-source projects at > >> >> >> >> >> > http://www.kitware.com/opensource/opensource.html > >> >> >> >> >> > > >> >> >> >> >> > Please keep messages on-topic and check the ParaView > >> >> >> >> >> > Wiki > >> at: > >> >> >> >> >> > http://paraview.org/Wiki/ParaView > >> >> >> >> >> > > >> >> >> >> >> > Follow this link to subscribe/unsubscribe: > >> >> >> >> >> > http://www.paraview.org/mailman/listinfo/paraview > >> >> >> >> >> > > >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> >> -- > >> >> >> >> >> Cory Quammen > >> >> >> >> >> Research Associate > >> >> >> >> >> Department of Computer Science The University of North > >> >> >> >> >> Carolina at Chapel Hill > >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> >> ------------------------------ > >> >> >> >> >> > >> >> >> >> >> > _______________________________________________ > >> >> >> >> >> Powered by www.kitware.com > >> >> >> >> >> > >> >> >> >> >> Visit other Kitware open-source projects at > >> >> >> >> >> http://www.kitware.com/opensource/opensource.html > >> >> >> >> >> > >> >> >> >> >> Please keep messages on-topic and check the ParaView Wiki > at: > >> >> >> >> >> http://paraview.org/Wiki/ParaView > >> >> >> >> >> > >> >> >> >> >> Follow this link to subscribe/unsubscribe: > >> >> >> >> >> http://www.paraview.org/mailman/listinfo/paraview > >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> >> End of ParaView Digest, Vol 110, Issue 42 > >> >> >> >> >> ***************************************** > >> >> >> >> > > >> >> >> >> > > >> >> >> >> > > >> >> >> >> > >> >> >> > >> >> > >> > __________________________________________________________ > >> >> >> >> ___________ > >> >> >> >> > ERBE Elektromedizin GmbH > >> >> >> >> > Firmensitz: 72072 Tuebingen > >> >> >> >> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede > >> >> >> >> > Registergericht: Stuttgart HRB 380137 > >> >> >> >> > > >> >> >> >> > _______________________________________________ > >> >> >> >> > Powered by www.kitware.com > >> >> >> >> > > >> >> >> >> > Visit other Kitware open-source projects at > >> >> >> >> > http://www.kitware.com/opensource/opensource.html > >> >> >> >> > > >> >> >> >> > Please keep messages on-topic and check the ParaView Wiki > at: > >> >> >> >> > http://paraview.org/Wiki/ParaView > >> >> >> >> > > >> >> >> >> > Follow this link to subscribe/unsubscribe: > >> >> >> >> > http://public.kitware.com/mailman/listinfo/paraview > >> >> >> > > >> >> >> > > >> >> >> > > >> >> >> > >> >> > >> > __________________________________________________________ > >> >> >> ___________ > >> >> >> > ERBE Elektromedizin GmbH > >> >> >> > Firmensitz: 72072 Tuebingen > >> >> >> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede > >> >> >> > Registergericht: Stuttgart HRB 380137 > >> >> >> > > >> >> >> > _______________________________________________ > >> >> >> > Powered by www.kitware.com > >> >> >> > > >> >> >> > Visit other Kitware open-source projects at > >> >> >> > http://www.kitware.com/opensource/opensource.html > >> >> >> > > >> >> >> > Please keep messages on-topic and check the ParaView Wiki at: > >> >> >> > http://paraview.org/Wiki/ParaView > >> >> >> > > >> >> >> > Follow this link to subscribe/unsubscribe: > >> >> >> > http://public.kitware.com/mailman/listinfo/paraview > >> >> > > >> >> > > >> >> > > >> >> > >> > __________________________________________________________ > >> >> ___________ > >> >> > ERBE Elektromedizin GmbH > >> >> > Firmensitz: 72072 Tuebingen > >> >> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede > >> >> > Registergericht: Stuttgart HRB 380137 > >> >> > > >> > > >> > > >> > > >> > __________________________________________________________ > >> ___________ > >> > ERBE Elektromedizin GmbH > >> > Firmensitz: 72072 Tuebingen > >> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede > >> > Registergericht: Stuttgart HRB 380137 > >> > > > > > > > > __________________________________________________________ > ___________ > > ERBE Elektromedizin GmbH > > Firmensitz: 72072 Tuebingen > > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede > > Registergericht: Stuttgart HRB 380137 > > _____________________________________________________________________ ERBE Elektromedizin GmbH Firmensitz: 72072 Tuebingen Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede Registergericht: Stuttgart HRB 380137 _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview