Can you try the script with 4.2-RC before we try debugging this? Thanks Utkarsh
On Mon, Sep 22, 2014 at 5:16 AM, Zenker, Dr. Matthias <matthias.zen...@erbe-med.com> wrote: > Hi Utkarsh, > > thank you for the Python script. > Having never used Python scripts in ParaView before, I have difficulties to > run it. When I open the Python shell and try to launch the script with the > "Run Script" button, I get an error message saying: > > Traceback (most recent call last): > File "<string>", line 19, in <module> > NameError: name 'GetActiveSource' is not defined > > I use ParaView 4.0.1 under Windows 7. I have added the lib directory of > ParaView to my path, as it says in the ParaView Python documentation. Is > there anything else I need to do to run the script? > > When I load it as a macro, the corresponding button appears, but when I click > on it, nothing seems to happen. I have tested it with a pvd time collection > where I have commented out the last timestep. When I loaded it, all timesteps > but the last one were visible. Then I removed the comment marks around in the > last timestep in the pvd file and lauched the Refresh Reader macro. I would > expect that now the last timestep in the pvd would be visible, but it wasn't. > > You said that the reader to reload should be the active reader. How do I see > which reader is the active one? The pvd collection was highlighted when I > activated the macro. Do I have to do something else? > > Thanks, > > Matthias > >> -----Ursprüngliche Nachricht----- >> Von: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com] >> Gesendet: Sonntag, 21. September 2014 16:17 >> An: Zenker, Dr. Matthias >> Cc: Cory Quammen; paraview@paraview.org >> Betreff: Re: [Paraview] How to simply "Reload" a data file >> >> Matthias, >> >> Attached is the Python script that reloads a file-series. You can import >> this as >> a macro or just run it from the Python shell. In either case, ensure that the >> reader to reload is the active reader. >> >> Utkarsh >> >> >> On Thu, Sep 18, 2014 at 9:34 AM, Zenker, Dr. Matthias >> <matthias.zen...@erbe-med.com> wrote: >> > OK - but don't forget that the weekend is also there to have some free >> > time... ;) >> > >> > Matthias >> > >> >> -----Ursprüngliche Nachricht----- >> >> Von: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com] >> >> Gesendet: Donnerstag, 18. September 2014 14:46 >> >> An: Zenker, Dr. Matthias >> >> Cc: Cory Quammen; paraview@paraview.org >> >> Betreff: Re: [Paraview] How to simply "Reload" a data file >> >> >> >> Sorry, didn't get around to it yet. Over this weekend is more likely, >> >> since I am tracking down some last minute issues with 4.2 right now. >> >> >> >> Utkarsh >> >> >> >> On Thu, Sep 18, 2014 at 3:33 AM, Zenker, Dr. Matthias >> >> <matthias.zen...@erbe-med.com> wrote: >> >> > Hi Utkarsh, >> >> > >> >> > any news regarding a reload data function (see below)? >> >> > >> >> > Matthias >> >> > >> >> >> -----Ursprüngliche Nachricht----- >> >> >> Von: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com] >> >> >> Gesendet: Montag, 15. September 2014 16:50 >> >> >> An: Zenker, Dr. Matthias >> >> >> Cc: Cory Quammen; paraview@paraview.org >> >> >> Betreff: Re: [Paraview] How to simply "Reload" a data file >> >> >> >> >> >> Ah. since it's a file series, it would not work the way Cory is >> >> >> suggesting. I'll see if I can cook up a Python script that can >> >> >> make this possible for now. We're putting this on the roadmap for >> >> >> the next release (I know I've said that a few times in the past :) ). >> >> >> >> >> >> Utkarsh >> >> >> >> >> >> On Mon, Sep 15, 2014 at 10:31 AM, Zenker, Dr. Matthias >> >> >> <matthias.zen...@erbe-med.com> wrote: >> >> >> > Normally I load a time series, either a series of vtu files or a >> >> >> > time collection >> >> >> (pvd file containing the vtu file names with asociated timestamps). >> >> >> During the simulation, new files are added to the series. So it >> >> >> would be nice to watch the simulation going on by reloading from time >> to time. >> >> >> > >> >> >> > Matthias >> >> >> > >> >> >> >> -----Ursprüngliche Nachricht----- >> >> >> >> Von: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com] >> >> >> >> Gesendet: Montag, 15. September 2014 16:28 >> >> >> >> An: Zenker, Dr. Matthias >> >> >> >> Cc: Cory Quammen; paraview@paraview.org >> >> >> >> Betreff: Re: [Paraview] How to simply "Reload" a data file >> >> >> >> >> >> >> >> I suspect will not work with vtu. To understand this better, >> >> >> >> what is that which is changing that you need to reload the >> >> >> >> file? Are you loading a file series or a single file? >> >> >> >> >> >> >> >> Utkarsh >> >> >> >> >> >> >> >> On Mon, Sep 15, 2014 at 9:54 AM, Zenker, Dr. Matthias >> >> >> >> <matthias.zen...@erbe-med.com> wrote: >> >> >> >> > Hi Cory, >> >> >> >> > >> >> >> >> > I use the reader for vtu format and pvd (vtu time >> >> >> >> > collection). I tried to >> >> >> >> modify the xml as follows: >> >> >> >> > >> >> >> >> > <ParaViewPlugin> >> >> >> >> > <ServerManagerConfiguration> >> >> >> >> > <ProxyGroup name="sources"> <SourceProxy >> name="VTUrefresh" >> >> >> >> > base_proxygroup="sources" >> >> >> >> base_proxyname="VTUReader" class="vtuReader"> >> >> >> >> > <Property name="Refresh" command="Modified" >> >> >> >> panel_widget="command_button"/> >> >> >> >> > <Hints> >> >> >> >> > <ReaderFactory extensions="vtu pvd" >> >> >> >> > file_description="vtu Reader >> >> >> >> (Refresh button)" /> >> >> >> >> > </Hints> >> >> >> >> > </SourceProxy> >> >> >> >> > </ProxyGroup> >> >> >> >> > </ServerManagerConfiguration> >> >> >> >> > <ParaViewReaders> >> >> >> >> > <Reader name="ReaderWithButton" /> >> >> >> >> > </ParaViewReaders> >> >> >> >> > </ParaViewPlugin> >> >> >> >> > >> >> >> >> > But I cannot even load it as plugin. Presumably there are >> >> >> >> > special keyword to >> >> >> >> use for the name of the original reader. Is there a >> >> >> >> documentation where I can find more information on that topic? >> >> >> >> > >> >> >> >> > Thanks, >> >> >> >> > >> >> >> >> > Matthias >> >> >> >> > >> >> >> >> >> -----Ursprüngliche Nachricht----- >> >> >> >> >> Von: Cory Quammen [mailto:cory.quam...@kitware.com] >> >> >> >> >> Gesendet: Montag, 15. September 2014 15:05 >> >> >> >> >> An: Zenker, Dr. Matthias >> >> >> >> >> Cc: paraview@paraview.org >> >> >> >> >> Betreff: Re: [Paraview] How to simply "Reload" a data file >> >> >> >> >> >> >> >> >> >> Matthias, >> >> >> >> >> >> >> >> >> >> The method I suggested requires modifying ParaView's source >> >> >> >> >> code, so it won't work for a binary distribution. >> >> >> >> >> >> >> >> >> >> As for the XML method, did you try to load an Xdmf file >> >> >> >> >> through what should be the new "Xdmf Reader (Refresh >> button)" reader? >> >> >> >> >> If you are loading a different type of file, this plugin >> >> >> >> >> will have no effect because it provides a Refresh button >> >> >> >> >> only for the Xdmf reader. You could modify the XML for other >> >> >> >> >> reader types, >> >> though. >> >> >> >> >> >> >> >> >> >> Thanks, >> >> >> >> >> Cory >> >> >> >> >> >> >> >> >> >> On Mon, Sep 15, 2014 at 4:16 AM, Zenker, Dr. Matthias >> >> >> >> >> <matthias.zen...@erbe-med.com> wrote: >> >> >> >> >> > Hi, >> >> >> >> >> > >> >> >> >> >> > I wanted to try the "Reload" button which presumably can >> >> >> >> >> > be created by >> >> >> >> >> one of the methods outlined below. But I am maybe too naive >> >> >> >> >> or am missing >> >> >> >> >> something: I have a Windoze binary distribution of ParaView >> 4.0.1. >> >> >> >> >> I did not find the file indicated by Cory, and copying the >> >> >> >> >> xml code given by Sébastien into a file and loading that as >> >> >> >> >> plugin had no effect >> >> >> >> visible to me. >> >> >> >> >> > >> >> >> >> >> > What am I missing here? >> >> >> >> >> > >> >> >> >> >> > Thank you, >> >> >> >> >> > >> >> >> >> >> > Matthias >> >> >> >> >> > >> >> >> >> >> >> -----Ursprüngliche Nachricht----- >> >> >> >> >> >> Von: paraview-boun...@paraview.org [mailto:paraview- >> >> >> >> >> >> boun...@paraview.org] Im Auftrag von paraview- >> >> >> >> requ...@paraview.org >> >> >> >> >> >> Gesendet: Samstag, 15. Juni 2013 18:00 >> >> >> >> >> >> An: paraview@paraview.org >> >> >> >> >> >> Betreff: Reload a file >> >> >> >> >> >> >> >> >> >> >> >> Send ParaView mailing list submissions to >> >> >> >> >> >> paraview@paraview.org >> >> >> >> >> >> >> >> >> >> >> >> To subscribe or unsubscribe via the World Wide Web, visit >> >> >> >> >> >> http://www.paraview.org/mailman/listinfo/paraview >> >> >> >> >> >> or, via email, send a message with subject or body 'help' to >> >> >> >> >> >> paraview-requ...@paraview.org >> >> >> >> >> >> >> >> >> >> >> >> You can reach the person managing the list at >> >> >> >> >> >> paraview-ow...@paraview.org >> >> >> >> >> >> >> >> >> >> >> >> When replying, please edit your Subject line so it is >> >> >> >> >> >> more specific than >> >> >> >> >> "Re: >> >> >> >> >> >> Contents of ParaView digest..." >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> Today's Topics: >> >> >> >> >> >> >> >> >> >> >> >> 1. Re: How to simply "Reload" a data file (Cory >> >> >> >> >> >> Quammen) >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> --------------------------------------------------------- >> >> >> >> >> >> --- >> >> >> >> >> >> --- >> >> >> >> >> >> --- >> >> >> >> >> >> --- >> >> >> >> >> >> - >> >> >> >> >> >> >> >> >> >> >> >> Message: 1 >> >> >> >> >> >> Date: Fri, 14 Jun 2013 13:42:34 -0400 >> >> >> >> >> >> From: Cory Quammen <cquam...@cs.unc.edu> >> >> >> >> >> >> Subject: Re: [Paraview] How to simply "Reload" a data >> >> >> >> >> >> file >> >> >> >> >> >> To: Sebastien Jourdain <sebastien.jourd...@kitware.com> >> >> >> >> >> >> Cc: Michael Jackson <mike.jack...@bluequartz.net>, >> >> ParaView >> >> >> >> >> >> <paraview@paraview.org> >> >> >> >> >> >> Message-ID: >> >> >> >> >> >> <CANmPiKDegNcAjjRwcVimiGAq3s9j02q7xE- >> >> >> >> >> >> oervrsrnbzus...@mail.gmail.com> >> >> >> >> >> >> Content-Type: text/plain; charset=ISO-8859-1 >> >> >> >> >> >> >> >> >> >> >> >> For what it's worth, I just experimented with adding the >> >> >> >> >> >> line >> >> >> >> >> >> >> >> >> >> >> >> <Property name="Refresh" command="Modified" >> >> >> >> >> >> panel_widget="command_button"/> >> >> >> >> >> >> >> >> >> >> >> >> to the CSV reader and XDMF reader in >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> ParaView/ParaViewCore/ServerManager/SMApplication/Resources/readers >> >> >> >> >> >> .xml >> >> >> >> >> >> >> >> >> >> >> >> The Refresh button appears among the other property >> >> >> >> >> >> widgets and it indeed reloads the data set. >> >> >> >> >> >> >> >> >> >> >> >> I would happily add this to all the readers and submit a >> >> >> >> >> >> patch to gerrit if it would be received well by the core >> >> >> >> >> >> ParaView >> >> >> developers. >> >> >> >> >> >> >> >> >> >> >> >> Thanks, >> >> >> >> >> >> Cory >> >> >> >> >> >> >> >> >> >> >> >> On Fri, Jun 14, 2013 at 11:57 AM, Sebastien Jourdain >> >> >> >> >> >> <sebastien.jourd...@kitware.com> wrote: >> >> >> >> >> >> > BTW that's the correct XML for you, just need to create >> >> >> >> >> >> > a file with that in and load it as a plugin and you >> >> >> >> >> >> > will have your >> >> >> "Refresh" >> >> >> >> button. >> >> >> >> >> >> > >> >> >> >> >> >> > <ParaViewPlugin> >> >> >> >> >> >> > <ServerManagerConfiguration> >> >> >> >> >> >> > <ProxyGroup name="sources"> <SourceProxy >> >> >> >> >> >> > name="XDMFRrefresh" base_proxygroup="sources" >> >> >> >> >> >> > base_proxyname="XdmfReader" class="vtkXdmfReader"> >> >> >> >> >> >> > <Property name="Refresh" command="Modified" >> >> >> >> >> >> > panel_widget="command_button"/> >> >> >> >> >> >> > <Hints> >> >> >> >> >> >> > <ReaderFactory extensions="xmf xdmf" >> >> >> >> >> >> > file_description="Xdmf Reader (Refresh button)" /> >> >> >> >> >> >> > </Hints> >> >> >> >> >> >> > </SourceProxy> >> >> >> >> >> >> > </ProxyGroup> >> >> >> >> >> >> > </ServerManagerConfiguration> >> >> >> >> >> >> > <ParaViewReaders> >> >> >> >> >> >> > <Reader name="ReaderWithButton" /> >> >> >> >> >> >> > </ParaViewReaders> >> >> >> >> >> >> > </ParaViewPlugin> >> >> >> >> >> >> > >> >> >> >> >> >> > >> >> >> >> >> >> > >> >> >> >> >> >> > >> >> >> >> >> >> > >> >> >> >> >> >> > On Fri, Jun 14, 2013 at 10:27 AM, Sebastien Jourdain >> >> >> >> >> >> > <sebastien.jourd...@kitware.com> wrote: >> >> >> >> >> >> >> >> >> >> >> >> >> >> Another approach could be a python macro that >> >> >> >> >> >> >> invalidate the "active/selected' proxy in the >> >> >> >> >> >> >> pipeline, but that one will require the usage of ParaView >> in built-in mode. >> >> >> >> >> >> >> >> >> >> >> >> >> >> If interested I can try to write the corresponding >> >> >> >> >> >> >> python >> >> code... >> >> >> >> >> >> >> >> >> >> >> >> >> >> Seb >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> On Fri, Jun 14, 2013 at 10:24 AM, Sebastien Jourdain >> >> >> >> >> >> >> <sebastien.jourd...@kitware.com> wrote: >> >> >> >> >> >> >>> >> >> >> >> >> >> >>> I forgot to state the obvious, the plugin is a XML one... >> >> >> >> >> >> >>> No code involved... >> >> >> >> >> >> >>> >> >> >> >> >> >> >>> In fact, just having the XML that I wrote in a file >> >> >> >> >> >> >>> extend the UI with a button to refresh the reader >> >> >> >> >> >> >>> should be >> >> enough. >> >> >> >> >> >> >>> Need to figure out why the reader factory did not >> >> >> >> >> >> >>> catch up the >> >> >> >> hint. >> >> >> >> >> >> >>> >> >> >> >> >> >> >>> That should be the only thing that you would need. >> >> >> >> >> >> >>> >> >> >> >> >> >> >>> Seb >> >> >> >> >> >> >>> >> >> >> >> >> >> >>> >> >> >> >> >> >> >>> >> >> >> >> >> >> >>> On Fri, Jun 14, 2013 at 10:08 AM, Michael Jackson >> >> >> >> >> >> >>> <mike.jack...@bluequartz.net> wrote: >> >> >> >> >> >> >>>> >> >> >> >> >> >> >>>> I was hoping that ParaView just had something built in. >> >> >> >> >> >> >>>> I would rather not have to create a plugin and >> >> >> >> >> >> >>>> distribute that along side my own software and to >> >> >> >> >> >> >>>> keep up on builds for all the various OS's and all of >> >> >> >> >> >> >>>> that. >> >> >> >> >> >> >>>> i tried that for a while and I just could not >> >> >> >> >> keep up. >> >> >> >> >> >> >>>> >> >> >> >> >> >> >>>> So either I am the only person who has asked for >> >> >> >> >> >> >>>> this or there is some over riding reason in the >> >> >> >> >> >> >>>> design of ParView why this type of functionality is not >> >> >> >> >> >> >>>> in >> ParaView. >> >> >> >> >> >> >>>> >> >> >> >> >> >> >>>> Thanks >> >> >> >> >> >> >>>> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> __________________________________________________________ >> >> >> >> >> >> _ >> >> >> >> >> >> >>>> Mike Jackson Principal Software >> >> >> >> >> >> >>>> Engineer >> >> >> >> >> >> >>>> BlueQuartz Software Dayton, >> >> >> >> >> >> >>>> Ohio >> >> >> >> >> >> >>>> mike.jack...@bluequartz.net >> www.bluequartz.net >> >> >> >> >> >> >>>> >> >> >> >> >> >> >>>> On Jun 14, 2013, at 3:40 PM, Felipe Bordeu >> >> >> >> >> >> >>>> <felipe.bor...@ec-nantes.fr> >> >> >> >> >> >> >>>> wrote: >> >> >> >> >> >> >>>> >> >> >> >> >> >> >>>> > hi you can try the approach of S?bastien >> >> >> >> >> >> >>>> > >> >> >> >> >> >> >>>> > http://perso.uclouvain.be/sebastien.blaise/tools.h >> >> >> >> >> >> >>>> > tml >> >> >> >> >> >> >>>> > >> >> >> >> >> >> >>>> > I haven't tested yet. >> >> >> >> >> >> >>>> > >> >> >> >> >> >> >>>> > You can save the code as a macro, so you will have >> >> >> >> >> >> >>>> > a >> >> button. >> >> >> >> >> >> >>>> > >> >> >> >> >> >> >>>> > Felipe >> >> >> >> >> >> >>>> > >> >> >> >> >> >> >>>> > Le 14/06/2013 09:42, Michael Jackson a ?crit : >> >> >> >> >> >> >>>> >> Is there button where I can simply reload a data >> >> >> >> >> >> >>>> >> file that was read in a pipeline? >> >> >> >> >> >> >>>> >> >> >> >> >> >> >> >>>> >> We have a workflow where we process data into a >> >> >> >> >> >> >>>> >> file and view it in ParaView. it is becoming >> >> >> >> >> >> >>>> >> tedious to blow away the entire pipeline just to >> >> >> >> >> >> >>>> >> reload the new >> >> data. >> >> >> >> >> >> >>>> >> >> >> >> >> >> >> >>>> >> I know about state files but this still requires >> >> >> >> >> >> >>>> >> the user to go to the File->Load State... " menu >> >> >> >> >> >> >>>> >> and then select a state >> >> >> >> file. >> >> >> >> >> >> >>>> >> I would like to just select the data file in the >> >> >> >> >> >> >>>> >> Pipeline browser (XDMF File reader for us), and >> >> >> >> >> >> >>>> >> just click some button that just reloads data from >> the file. >> >> >> >> >> >> >>>> >> >> >> >> >> >> >> >>>> >> Or am I just missing something? I am using >> >> >> >> >> >> >>>> >> ParaView 3.98.1. I have to admit I have not tried >> >> >> >> >> >> >>>> >> any of the >> >> >> >> >> >> >>>> >> 4.0.RC* >> >> >> >> downloads. >> >> >> >> >> >> >>>> >> >> >> >> >> >> >> >>>> >> Thanks >> >> >> >> >> >> >>>> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> _________________________________________________________ >> >> >> >> >> >> >>>> >> Mike Jackson >> >> >> >> >> >> >>>> >> mike.jack...@bluequartz.net >> >> >> >> >> >> >>>> >> BlueQuartz Software >> >> >> >> >> >> >>>> >> www.bluequartz.net >> >> >> >> >> >> >>>> >> Principal Software Engineer Dayton, >> >> >> >> >> >> >>>> >> Ohio >> >> >> >> >> >> >>>> >> >> >> >> _______________________________________________ >> >> >> >> >> >> >>>> >> Powered by www.kitware.com >> >> >> >> >> >> >>>> >> >> >> >> >> >> >> >>>> >> Visit other Kitware open-source projects at >> >> >> >> >> >> >>>> >> >> >> http://www.kitware.com/opensource/opensource.html >> >> >> >> >> >> >>>> >> >> >> >> >> >> >> >>>> >> Please keep messages on-topic and check the >> >> >> >> >> >> >>>> >> ParaView Wiki >> >> >> >> at: >> >> >> >> >> >> >>>> >> http://paraview.org/Wiki/ParaView >> >> >> >> >> >> >>>> >> >> >> >> >> >> >> >>>> >> Follow this link to subscribe/unsubscribe: >> >> >> >> >> >> >>>> >> >> http://www.paraview.org/mailman/listinfo/paraview >> >> >> >> >> >> >>>> > >> >> >> >> >> >> >>>> > >> >> >> >> >> >> >>>> > -- >> >> >> >> >> >> >>>> > Felipe Bordeu Weldt Ing?nieur de Recherche >> >> >> >> >> >> >>>> > ------------------------------------- >> >> >> >> >> >> >>>> > T?l. : 33 (0)2 40 37 16 57 Fax. : 33 (0)2 40 74 74 >> >> >> >> >> >> >>>> > 06 felipe.bor...@ec-nantes.fr Institut GeM - UMR >> >> >> >> >> >> >>>> > CNRS >> >> >> >> >> >> >>>> > 6183 ?cole Centrale Nantes >> >> >> >> >> >> >>>> > 1 Rue de La No?, 44321 Nantes, FRANCE >> >> >> >> >> >> >>>> > ------------------------------------- >> >> >> >> >> >> >>>> > >> >> >> >> >> >> >>>> > >> >> >> _______________________________________________ >> >> >> >> >> >> >>>> > Powered by www.kitware.com >> >> >> >> >> >> >>>> > >> >> >> >> >> >> >>>> > Visit other Kitware open-source projects at >> >> >> >> >> >> >>>> > >> http://www.kitware.com/opensource/opensource.html >> >> >> >> >> >> >>>> > >> >> >> >> >> >> >>>> > Please keep messages on-topic and check the >> >> >> >> >> >> >>>> > ParaView Wiki >> >> >> >> at: >> >> >> >> >> >> >>>> > http://paraview.org/Wiki/ParaView >> >> >> >> >> >> >>>> > >> >> >> >> >> >> >>>> > Follow this link to subscribe/unsubscribe: >> >> >> >> >> >> >>>> > http://www.paraview.org/mailman/listinfo/paraview >> >> >> >> >> >> >>>> >> >> >> >> >> >> >>>> >> >> _______________________________________________ >> >> >> >> >> >> >>>> Powered by www.kitware.com >> >> >> >> >> >> >>>> >> >> >> >> >> >> >>>> Visit other Kitware open-source projects at >> >> >> >> >> >> >>>> >> http://www.kitware.com/opensource/opensource.html >> >> >> >> >> >> >>>> >> >> >> >> >> >> >>>> Please keep messages on-topic and check the ParaView >> >> >> >> >> >> >>>> Wiki >> >> >> at: >> >> >> >> >> >> >>>> http://paraview.org/Wiki/ParaView >> >> >> >> >> >> >>>> >> >> >> >> >> >> >>>> Follow this link to subscribe/unsubscribe: >> >> >> >> >> >> >>>> http://www.paraview.org/mailman/listinfo/paraview >> >> >> >> >> >> >>> >> >> >> >> >> >> >>> >> >> >> >> >> >> >> >> >> >> >> >> >> > >> >> >> >> >> >> > >> >> >> >> >> >> > >> _______________________________________________ >> >> >> >> >> >> > Powered by www.kitware.com >> >> >> >> >> >> > >> >> >> >> >> >> > Visit other Kitware open-source projects at >> >> >> >> >> >> > http://www.kitware.com/opensource/opensource.html >> >> >> >> >> >> > >> >> >> >> >> >> > Please keep messages on-topic and check the ParaView >> >> >> >> >> >> > Wiki >> >> at: >> >> >> >> >> >> > http://paraview.org/Wiki/ParaView >> >> >> >> >> >> > >> >> >> >> >> >> > Follow this link to subscribe/unsubscribe: >> >> >> >> >> >> > http://www.paraview.org/mailman/listinfo/paraview >> >> >> >> >> >> > >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> -- >> >> >> >> >> >> Cory Quammen >> >> >> >> >> >> Research Associate >> >> >> >> >> >> Department of Computer Science The University of North >> >> >> >> >> >> Carolina at Chapel Hill >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> ------------------------------ >> >> >> >> >> >> >> >> >> >> >> >> >> _______________________________________________ >> >> >> >> >> >> Powered by www.kitware.com >> >> >> >> >> >> >> >> >> >> >> >> Visit other Kitware open-source projects at >> >> >> >> >> >> http://www.kitware.com/opensource/opensource.html >> >> >> >> >> >> >> >> >> >> >> >> Please keep messages on-topic and check the ParaView Wiki >> at: >> >> >> >> >> >> http://paraview.org/Wiki/ParaView >> >> >> >> >> >> >> >> >> >> >> >> Follow this link to subscribe/unsubscribe: >> >> >> >> >> >> http://www.paraview.org/mailman/listinfo/paraview >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> End of ParaView Digest, Vol 110, Issue 42 >> >> >> >> >> >> ***************************************** >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> __________________________________________________________ >> >> >> >> >> ___________ >> >> >> >> >> > ERBE Elektromedizin GmbH >> >> >> >> >> > Firmensitz: 72072 Tuebingen >> >> >> >> >> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede >> >> >> >> >> > Registergericht: Stuttgart HRB 380137 >> >> >> >> >> > >> >> >> >> >> > _______________________________________________ >> >> >> >> >> > Powered by www.kitware.com >> >> >> >> >> > >> >> >> >> >> > Visit other Kitware open-source projects at >> >> >> >> >> > http://www.kitware.com/opensource/opensource.html >> >> >> >> >> > >> >> >> >> >> > Please keep messages on-topic and check the ParaView Wiki >> at: >> >> >> >> >> > http://paraview.org/Wiki/ParaView >> >> >> >> >> > >> >> >> >> >> > Follow this link to subscribe/unsubscribe: >> >> >> >> >> > http://public.kitware.com/mailman/listinfo/paraview >> >> >> >> > >> >> >> >> > >> >> >> >> > >> >> >> >> >> >> >> >> >> >> __________________________________________________________ >> >> >> >> ___________ >> >> >> >> > ERBE Elektromedizin GmbH >> >> >> >> > Firmensitz: 72072 Tuebingen >> >> >> >> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede >> >> >> >> > Registergericht: Stuttgart HRB 380137 >> >> >> >> > >> >> >> >> > _______________________________________________ >> >> >> >> > Powered by www.kitware.com >> >> >> >> > >> >> >> >> > Visit other Kitware open-source projects at >> >> >> >> > http://www.kitware.com/opensource/opensource.html >> >> >> >> > >> >> >> >> > Please keep messages on-topic and check the ParaView Wiki at: >> >> >> >> > http://paraview.org/Wiki/ParaView >> >> >> >> > >> >> >> >> > Follow this link to subscribe/unsubscribe: >> >> >> >> > http://public.kitware.com/mailman/listinfo/paraview >> >> >> > >> >> >> > >> >> >> > >> >> >> >> >> >> __________________________________________________________ >> >> >> ___________ >> >> >> > ERBE Elektromedizin GmbH >> >> >> > Firmensitz: 72072 Tuebingen >> >> >> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede >> >> >> > Registergericht: Stuttgart HRB 380137 >> >> >> > >> >> > >> >> > >> >> > >> >> >> __________________________________________________________ >> >> ___________ >> >> > ERBE Elektromedizin GmbH >> >> > Firmensitz: 72072 Tuebingen >> >> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede >> >> > Registergericht: Stuttgart HRB 380137 >> >> > >> > >> > >> > >> __________________________________________________________ >> ___________ >> > ERBE Elektromedizin GmbH >> > Firmensitz: 72072 Tuebingen >> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede >> > Registergericht: Stuttgart HRB 380137 >> > > > > _____________________________________________________________________ > ERBE Elektromedizin GmbH > Firmensitz: 72072 Tuebingen > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede > Registergericht: Stuttgart HRB 380137 > _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview
