Hello,
sorry to intrude,
I think the problem may come from the CGNS loader of ParaView.
When using the CGNS plugin from ParaView development version, you get
the same picture as Ensight.
My two cents
Mickael
On 17/03/2015 05:04, Masaaki SHOJIMA wrote:
Hi Berk,
I appreciate your kindness
Here, I attaches the data.
Compare Gradient.pdf (252KB)
A calculated field by SC/Tetra solver is uploaded in Dropbox. (Calc.zip)
Please download the data. It contains FLD format for SC/Tetra post and
CGNS format for Ensight and Paraview.
https://www.dropbox.com/s/5fpeu1qwhyzjn5u/Calc.zip?dl=0
(1) I calculated the flow and the pressure in a simple cylinder for a
test ( diameter 0.005m, length 0.01m). Plug flow at inlet with 0.03 m/s.
(2) Data were transfered to Ensight and Paraview in CGNS format.
(3) Pressure was mapped on the surface and compared between SC/Tetra
post, Ensight and Paraview. All application provided same results.
(4) Gradient (pressure) was calculated in each post and z-component of
Gradient (pressure) was visualized with same colored contour. Only
paraview provided a different image because the computed gradients in
paraview had half values compared to SC/Tetra post and Ensight.
(5) Gradient (velocity-X) was also calculated in each post and the
X-component of Grad (velocity-X) was visualized. Same results as shown
in 4.
Thanks a lot.
Masaaki
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview
