High Walter, This is a trick that I taut myself 15 years ago when I lost my eyesite. I have been doing this ever cense. John Price.
----- Original Message ----- From: "Walter Ramage" <[EMAIL PROTECTED]> To: "PC Audio Discussion List" <pc-audio@pc-audio.org> Sent: Tuesday, September 11, 2007 4:06 AM Subject: Identifying the playing surface and non playing surface of a CD > Ok. Here's the best way to identify the playing surface and non playing > surface of a CD. Braille readers will be able to use their finger tips > but > for those who have sensitivity problems use your finger nail but very > carefully. Probably the easiest way to do this, if you are doing it for > the > first time is to place the disc in the case. From the centre of the disc > slowly run your finger nail towards the outer edge of the disc. About > half > an inch from the spindle hole you will find a deep groove, your finger > nail > will pick this up. This is the non playing surface. Now if you turn the > disc up the other way and again slowly and gently run your finger nail > from > the centre towards the outer edge about half an inch from the centre you > will find a ridge. Depending on the brand of the disc the ridge will vary > in how pronounced it is but it is there and It is a ridge. This is the > playing surface. Once you get used to feeling it then you will know at a > very brief touch which side is which. Walter. > > > > > > Audio List Help, Guidelines, Archives and more... > http://www.pc-audio.org > > To unsubscribe from this list, send a blank email to: > [EMAIL PROTECTED] > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.5.485 / Virus Database: 269.13.13/998 - Release Date: 9/10/2007 > 8:48 AM > > Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
