Thanks!
----- Original Message -----
From: "Dane Trethowan" <grtd...@internode.on.net>
To: "PC Audio Discussion List" <pc-audio@pc-audio.org>
Sent: Wednesday, November 03, 2010 3:16 AM
Subject: Re: A tip to overcome one of the annoying problems with the Zoom H1
I've not experimented much with MP3 files though logic would dictate that
the rate of writing would be smaller, the way I look at things regarding the
Zoom H1 is that I need not bother with MP3, after all! I have a computer
which probably does a far better job than the Zoom H1 does at MP3 encoding
<smile>.
On 03/11/2010, at 6:21 PM, Gary Wood wrote:
Dane, you mentioned wav files. How about whilst using MP3's, and the
speed of those.
----- Original Message ----- From: "André van Deventer"
<andred...@webafrica.org.za>
To: "'PC Audio Discussion List'" <pc-audio@pc-audio.org>
Sent: Tuesday, November 02, 2010 11:13 AM
Subject: RE: A tip to overcome one of the annoying problems with the Zoom
H1
Dane
There are many of these weird things I use the induction loop coils in a
hearing aid for.
I can hear the hard disk of my iriver hard drive booting up for example.
And my cell phone to know if it's starting up or not.
If a normal hearing person can get hold of a small amplifier with an
induction loop built in, you will be able to check all kinds of
interesting things.
Andre
-----Original Message-----
From: pc-audio-boun...@pc-audio.org
[mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Dane Trethowan
Sent: 02 November 2010 04:37 AM
To: PC Audio Discussion List
Subject: A tip to overcome one of the annoying problems with the Zoom H1
Hi!
Now this tip isn't going to be for everyone as not everyone wears hearing
instruments which can be used with induction loops but if you do? Well
here's a handy way to use your instruments to great effect when sorting
out
one of the very few functions of the Zoom H1 which isn't accessible.
I'm talking about the Bit and Sample rate of the file you're recording,
this
is changed in "Standby" mode by using the fast forward and rewind
buttons,
rewind takes you back through the cycle whilst fast forward takes you
forward through the cycle of bit and sample rates.
When recording using Wave Broadcast format you cycle through 44.1KHZ 16
Bit,
48KHZ 24 bit and so on right the way up to 96KHZ 24 and back to 44.1KHZ
16
bit so how to tell where you are.
Well turn your instruments to pick up induction loops and put the
recorder
near them. Now start recording, you'll be able to hear the recorder as
it
writes to the SD card and the slower the rate of writing then the small
the
sample size, 44.1KHZ 16 bit has the Zoom H1 writing to the SD card about
every half second whilst 96KHZ 24 bit has the H1 writing to the SD card
every sixth of a second or so.
Just thought others may find this helpful as I do, still haven't worked
out
a way to set the date and time for date/time stamping of recordings but I
have to admit to not trying too hard, after all! one can change all that
when the files are copied from the H1 to your computer.
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org