Yep, that's right. You'll get feed back, and the monitoring isn't realtime. There is an instant delay and you'll get tung tied and confused.
-----Original Message----- From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Aidan Maher Sent: Wednesday, March 13, 2013 4:59 PM To: PC Audio Discussion List Subject: Re: Newbie Question About Setttings Also, if you record from a mic, its better to rather uncheck the listen to this device. On 13/03/2013, Darran Ross <darran.r...@dsl.pipex.com> wrote: > Thanks for this. > > I see I've got eight options here for the default format, should I > have the > > same bit rate selected here as I do in Goldwave? Assuming that that's > possible, haven't checked that yet! > > Darran > ----- Original Message ----- > From: "Hamit Campos" <hamitcam...@gmail.com> > To: "'PC Audio Discussion List'" <pc-audio@pc-audio.org> > Sent: Wednesday, March 13, 2013 8:09 PM > Subject: RE: Newbie Question About Setttings > > >> Since we're talking about line in recording, then yes you must check >> the listen to this device box, check the leval of volume just to be >> safe and make sure you aren't distorting, and there's not much in the >> defalt format dialogue box. What it will do though if you down arrow >> to the last choice >> >> is >> tellyou what the highest sample rate and bit depth your line in >> recordings can be at. For instance, mine will onlydo 96 thousand KHZ >> which is fine, but at 16 bit. My laptop on the other hand can do full >> HD 96 thousand KHZ at >> 24 >> bit. That's Blu-Ray quality. So there you have it. >> >> -----Original Message----- >> From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of >> Darran Ross >> Sent: Wednesday, March 13, 2013 11:46 AM >> To: PC Audio Discussion List >> Subject: Newbie Question About Setttings >> >> Hi List. >> >> I'm about to start trying to record on my PC, and I've got a couple >> of starter questions for the list. I'll be using Goldwave to record >> and edit, but my question concerns the settings within Windows 7 >> itself. >> >> Basically, do I need to make any changes to the settings within >> Recording Devices, or do I just plug in my Line-In cable and only >> concern myself with the various options in Goldwave? Need I do >> anything in the Listen tab or the Advanced tab for example? Should >> the Listen to this Device be checked or unchecked, and what about the >> Default Format settings when Running in Shared Mode? And, what is >> shared Mode come to that! >> >> As you can tell, I'm seeking a guiding hand! Any advice on which >> options to select in the Recording devices tabs would be much >> appreciated. >> >> Regards. >> >> Darran >> >> >> >> >> >> To unsubscribe from this list, send a blank email to: >> pc-audio-unsubscr...@pc-audio.org >> >> >> To unsubscribe from this list, send a blank email to: >> pc-audio-unsubscr...@pc-audio.org > > > To unsubscribe from this list, send a blank email to: > pc-audio-unsubscr...@pc-audio.org > To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
