Hi, It's because the outputs will not be the same in each
device.
If you turn both of them on and loading the output of one divice will be ok,
bacause it was made for that impedance match.
The other device might not match those phones.
Like I said one output can feed two inputs, The other way where two outputs
feeding the same load is not alwayse going to work.
That's why I sugested the earphone amp. or if you need to have two outputs
driving one earphone a small mixer is the best way.
The little sampson mixers around $50 are very nice.
-----Original Message-----
From: Evan Reese
Sent: Tuesday, September 10, 2013 12:50 PM
To: PC Audio Discussion List
Subject: Re: Looking for a Specific Type of Connector
Hmmm, why would two inputs and one output damage one or more pieces of
equipment. Separately, they can both drive the pair of headphones I've
hooked up to them. Why should connecting them both to the same pair of
headphones damage either of them?
Evan
----- Original Message -----
From: "Tom" <t...@pc-audio.org>
To: <pc-audio@pc-audio.org>
Sent: Monday, September 09, 2013 11:41 AM
Subject: Re: Looking for a Specific Type of Connector
I agree with Ken. Although what you need is a two in one out
mixer. A headphone amplifier most likely will have one input
and two or more outputs.
Your idea of having an adaptor with two inputs and one output
might work, but it could damage one or both pieces of equipment.
Tom
** Your Message **
> Hi, let me sugest this.
>The best way is to get a head phone amplifier.
>This arangment should only be used for inputs, because
>loading in inputs is
>way less.
>Get the headphone amp, you'l be glad you did.
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org