Is there any way to share a internet connection between a Mac and a PC?
Such as PC connected to the internet via cable modem, Mac connected to PC via crossover Ethernet cable. Whenever I tell the Mac to go to the internet it does so thru the PC's connection.
If the cable modem is connected to the PC, run WinProxy on the PC. A decent solution, but not very stable.
If the cable modem is connected to the Mac, run IPNetRouter on the Mac.
Not that with either solution, you'll have difficulties with the cross-over cable and the Mac. Apple just doesn't handle cross-cables well. Best to use a hub or switch to connect the computers.
IPNetRouter is a far superior product, IMO. Basically a full featured router, that supports DHCP, NAT, filters, etc.
Or you could buy an off-the-shelf home/office NAT router, such as those made by LinkSys or D-Link or Cisco. They're easier to set-up than IPNetRouter, I guess. But they're slower and have fewer features.
Take a look at the info on Sustworks' web site for details about how to handle NAT routing in general, IPNetRouter specifics, etc.
http://www.sustworks.com/
- Dan. (A Sustworks reseller)
-- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
