I see all the extensions in OS 9.1, and believe they are correct: that is why the scanner works when I boot into 9.1 ... I just don't know about the OS X ones ... any clues? I am using "Peripheral Vision" and it shows the scanner becoming active when I start it up ...
The scanner seems to work under OS X when it is attached to a combo card, like the ones you mention ... this Trio thing just might be too much for a PowerPC 8500 and USB 2.0 (something about "bandwidth" - it attempts to control FW400 and USB 2.0(1.1) and ATA133)... Sonnet Tech hasn't responded with any solutions ... I did try to install their USB 2.0 drivers that they supplied for OS X 10.2.1 through 10.2.7 ... but it didn't work ... wonder if it was conflicting with the supposedly native drivers to OS X 10.2.8 ...
The Nikon 5000ED slide scanner has just been released in the US as far as I can tell ... it is relatively new ... perhaps there's a bug on the OS X side of USB 2.0 and/or the Trio card ... my other card I used it with, is USB 1.1 ...
My Kensington USB StudioMouse functions well through it ... I don't have any other USB peripherals to test it with at present ...
Onward ... Thanks for your responses.
On Saturday, February 28, 2004, at 02:38 AM, Fluxstringer wrote:
Actually, I just got through doing just that ... same results.
I then booted into 9.1 and ran scans successfully off the Trio card. What would that imply? OS X 10.2.8 USB 2.0 driver is not working for the Trio? That infamous statement "we do not support (non-on-board USB) legacy Macs" having some meaning here? OS 9.1 has Nikon drivers listed, but I believe they are relying on the native extensions for OS X ... that make any sense?
Nikon claims to not support general PCI cards ... only gives one as their recommended one ... something called "Ratoc".
Anyway ... to recap:
Works On a PowerPC 8500 with OS X 10.2.8 and the combo Sonnet FW400/USB1.1 card
Works On a PowerPC 8500 with OS 9.1 and the Trio Sonnet FW400/USB2.0(1.1)/ATA133 card
NOT On a ..... OS X 10.2.8 and ... Trio. (with all kinds of removing all devices from the card, down to only one ATA left, added a SCSI external to run the software off of, Repaired Permissions, re-installed Nikon software, uninstalled Kensington USB software, ... ... ...)
Hmmm ... any ideas?
********
I use a fuji camera with my Macs. I don't need any proprietary software. I just plug the camera in and the camera pops up as another drive. I can access with any graphic program. or open the folder and do whatever I want. I assume you have the USB card support 1.4.1 installed as it is part of OS 9 and it or better should be in OS X.
Have you tried other USB peripherals with your card ?
That "Ratoc " may be a PC only card.
Surely someone out there is using a Nikon with a Mac.
I have a Belkin USB card in 2 macs and a firewirte/ USB card in another. They have all been plug and play after a lister clued me to the card support upgrade. make sure you have it installed and > active.
-- Adrian
-- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives |
-- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml>
--> AOL users, remove "mailto:"
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive:<http://www.mail-archive.com/pci- powermacs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
-- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:" Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
