In the wee hour of 06:00 AM 5/14/01 -0400, Ted Mozer bequeathed such tales
as these:
>Just installed a Maxtor ATA Card and a 30 Gig Maxtor Drive hung off of it as
>a second hard drive. Mother board IDE bus has a 13 Gig Hard drive on one
>connection and my CD-Rom/Zip drive on the other (master/slave). Wanted to
>run a Sony DVD drive off the second connection of the Maxtor card as a
>master. Card will not recognize the DVD and will not allow the computer to
>boot with it attached. DVD is properly configured as a master. Any
>advise??
Have you tried putting the cdrom and zip drive on the controller while
having the dvd on the secondary IDE?
Peter Kaulback
I haven't failed, I've found 10,000 ways that don't work.
Thomas Edison (1847-1931)
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/rules.htm
Contact list owner <[EMAIL PROTECTED]>
Unsubscribing and other changes: http://pcworkers.com
=====================================================
