Clint:
Sorry for the delay in the reply, which
has already been sent. I was so taken
with playing with the Win 2000 machine after finding
that I did not have any USB 2.0 ports, that the time just
slipped by. I am replying on list because in the past,
I have had very poor results trying to send messages
to you directly.
Wally
Clint wrote:
I'm trying this again from a different address since I didn't
hear from you.
-Clint
On Fri, 17 Dec 2004 07:41:07 -0600 "Support-OrpheusComputing.com"
<[EMAIL PROTECTED]> writes:
> Yeah I'll send it to you off list.
> -Clint
>
> Merry Christmas to all & God Bless
> Clint Hamilton, Owner
> http://OrpheusComputing.com )
> http://ComputersCustomBuilt.com
>
> ----- Original Message -----
> From: <[EMAIL PROTECTED]>
>
> Clint:
> Thanks for the heads up. I will probably
> use win 98 or win NT when I get through
> playing with the win 2000 system.
> Is there a simple way to tell if you have a
> usb-1 or a usb-2 connector?
>
> Wally
>
> On Thu, 16 Dec 2004 05:26:05 -0600
> "Support-OrpheusComputing.com"
> > writes:
> > Wally, it's probably best to reformat to whatever OS you
> > have,
> > since the OS is probably not in the best of shape. You're
> > also
> > going to run into problems for when it needs a Win2K CD.
> > -Clint
>
> >
> > ----- Original Message -----
> > From: "Robert Thornton" <[EMAIL PROTECTED]>
> >
> >
> > Password cracker. http://home.eunet.no/~pnordahl/ntpasswd/
> >
> > http://home.eunet.no/~pnordahl/ntpasswd/
> > >I have received an old computer with a 20 Gb
> > > hard drive partitioned with a 2 Gb DOS primary
> > > partition and an 18 Gb NTFS partition. The
> > > computer boots to windows 2000 pro, but
> > > asks for a password for user or administrator
> > > which I do not have.
> > > There are no passwords needed for the BIOS.
> > > I have access to the DOS partition. Is there a
> > > way disable or change the password needed
> > > to continue the boot-up?
> > > I do not have a recovery disc or a windows
> > > 2000 Pro disc.
> > >
> > > Wally
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/rules.htm
Contact list owner <[EMAIL PROTECTED]>
Unsubscribing and other changes: http://pcworkers.com
=====================================================
