PCWorks: Power supply

[Vern]

I'm back with the powersupply questions again. <G> Finally installed the 500 
watt power supply I bought 10 weeks ago. Didn't help my cooling problem but 
now when I shut down WinXP goes through the motions but the hardware doesn't 
turn off like before. The fans are still running after Windows shuts down. 
Before I would get a notice on the monitor "no video signal", not now. 
Windows seems to be shutting down properly as I am not seeing it do a scan 
check when I turn the computer on.

The directions said something about a 20 prong cable and a 4 prong cable. I 
hooked the 20 prong one to the motherboard but not the 4 prong one. The old 
powersupply didn't use a 4 prong cable. I wouldn't know where to hook the 4 
prong cable anyways. Is this the problem or did I do something else wrong. 
The computer is working as I'm using it now. It just doesn't turn the power 
off at shut down.

Vern 
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/rules.htm
Contact list owner <[EMAIL PROTECTED]>
Unsubscribing and other changes: http://pcworkers.com
=====================================================