Hi Ann, It appears your printer has some sort of sensor that detects the type of paper being used, and apparently there are some problems with the sensor causing slow printing. I'm not sure if it's the culprit in your case, but you can read more about it here http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=bpy20450&product=57595&dlc=en&lang=en#N524
and download the Media Sense Calibration Utility here: http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=bpy20754&product=57595&dlc=en&lang=en I would also check the website for updated drivers. Good Luck, Marlene On 6/2/06, ann parker <[EMAIL PROTECTED]> wrote: > > I have a printer problem that I hope someone can help me with. I usually > do my printing in the draft mode, which means that it prints quite > rapidly. > In the best mode, it is much, much slower. It is an HP Photosmart 1215. > Recently it has begun printing one page rapidly as it should in the draft > mode, but, even though I don't make a change in the setting, the second > page > prints slowly as though it were in the best mode. Then the next will be > fast again, followed by a slow print. The print on the pages is the same. > The slow-printing pages are no better than the fast-printing pages. This > goes on until I have finished printing all the pages-----one fast and the > next slow. My computer is an HP Pavilion 7975. Will appreciate any help > you > can give me. Ann Parker ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
