Hi Michael,
first off: if you want to start a new thread on the mailing list, don't
answer to an existing thread and change the subject. Instead, write a
new mail to pd-list@lists.iem.at. Otherwise your message will be
associated with the thread you're replying to.
---
I can second everything Oliver has said. I also have the suspicion that
you have been using the (legacy) MMIO backend. Always use an ASIO driver
for any kind of low latency stuff! Typically you would use the driver
provided by the device manufacturer. In some rare cases, ASIO4ALL might
work better than the official driver, but IMO that would be a red flag.
Here's how you use Pd with an ASIO driver: Pd menu -> "Media" -> "ASIO
(via portaudio)". In the audio settings dialog, make sure that you
actually select the correct ASIO driver as input/output devices!
To give you another data point: I'm on Windows 10 and I typically use a
blocksize of 64 samples and 8-12 ms delay, depending on the patch.
If the Gigaport HD+ does not work at low latencies even with an ASIO
driver, do yourself a favor and get a better interface. For a low budget
solution, I can recommend the Behringer UMC series (except for UMC22).
They are very affordable and reliably work at low latencies. I you have
a bit more money in your pocket, get something like a Focusrite
Scarlett. If you want to go pro, have a look at the various RME interfaces.
Cheers,
Christof
On 27.10.2022 14:21, oliver wrote:
michael strohmann wrote:
HI,
what’s your strategies to reduce midi latency ?
in an installation setting i’m triggering samples from an e-drum
(roland pad, millenium midi module) and the latency a get with the
settigs below is 114 ms between trigger and sound.
delay(msec): 50 ms
Block Size: 256
if i go any lower i get “resyncing audio” filling up the pd-window
and occasional glitches up to a frozen pd…
occasionaly after a restart the latency is even closer to 250ms.
i am running this on a fairly decent gamer pc under windows 10 with
the esi Gigaport HD+ audio interface
Hi, usually midi interfaces have little to no latencies, or at least
they are most likely not your bottleneck. you have to use an ASIO
driver to get real low latencies on windows systems, or ALSA on Linux.
It won't work with the standard audio driver (MMIO).
For the Gigaport, i think there is an extra ASIO driver for download,
but "usually" you will be better off with the ASIO4ALL driver (that
would even work for your internal audiocard) - at least that's my
experience with this soundcard on a windows machine.
Having said that, i'm not sure that the "Gigaport HD+" really supports
low latencies at all. I used it once in an installation and remember
that i had to use a higher amount of PD's audio delay (= soundcard
buffer = overall latency) than with other soundcards, maybe a
trade-off for the 8 channels.
Do you need all of them ? (I guess so ...)
Anyway, try the internal soundcard first and see how low you can get
without hickups or clicks. to really test latencies i always use a
test setup like this:
[0.5, 0 1000(
|
[line~] [noise~]
| |
[*~ ]
| \
[dac~]
where the midi trigger fires the message box. use your phone recorder
to measure the "real life" latency between drum pad hit and noise woosh.
just for the record: i'm using a similar setup on an old acer netbook
with UBUNTU and an old MAYA44USB card and getting very low latencies
(less than 10ms) using ALSA drivers (PD blocksize 64, PD delay: 8)
i'm pretty sure that it's not your hardware that's lacking, but that
you have to use a dedicated audio driver (ASIO or ALSA)
best
Oliver
_______________________________________________
Pd-list@lists.iem.at mailing list
UNSUBSCRIBE and account-management ->
https://lists.puredata.info/listinfo/pd-list
_______________________________________________
Pd-list@lists.iem.at mailing list
UNSUBSCRIBE and account-management ->
https://lists.puredata.info/listinfo/pd-list