PDF-Forms is a service provided by PDFzone.com | http://www.pdfzone.com/ __________________________________________________________________


You can also use setpagedevice with PDF on (color) 2060/6060/iGen3 using a Creo front end XRX is also supported by Creo. I don't know if EFI or DocuSP front ends support this.


XRX works fine with DocuPrint.

Todd


The setpagedevice only works with postscript, and the implementation is
device specific. It does work on Xerox production printers.

Trray switches are not supported in pdf. Period.

If you have a Xerox 6xxx with a DocuSP front end (not sure about DocuPrint),
you can pre-pend Xerox comments to the pdf file. This directs the printer to
use those characteristics for that job.


Here is an example of some that we use in front of pdf files

%XRXbegin: 001.0300
%XRXPDLformat: PDF-1.4
%XRXsenderName: MAKEPDF
%XRXrecipientName: MAKEPDF
XRXbinding: None
%XRXedgeStitching: None
%XRXbookletMaker: False
%XRXrequirements: collated
%XRXxImageShift: 0
%XRXyImageShift: 0
%XRXdisposition: PRINT
%XRXsignature: False
%XRXdocumentPaperColors: white
%XRXpaperType-opacity: opaque
%XRXpaperType-weight: 75
%XRXcopyCount:  337
%XRXpaperType-preFinish: BIE 0 0
%XRXpaperType-size: 216 279
%XRXrequirements:  duplex
%XRXmessage:Trim to use BI3E and insert into OE3E envelope
%XRXaccount: 12print_A375
%XRXend
%PDF-1.4%����



 -----Original Message-----
From:   Todd Kueny [mailto:[EMAIL PROTECTED]
Sent:   Friday, January 09, 2004 5:02 PM
To:     [EMAIL PROTECTED]
Subject:        Re: [PDF-Forms] embedding duplex command directly into a PDF


PDF-Forms is a service provided by PDFzone.com | http://www.pdfzone.com/
__________________________________________________________________


You have several choices for commercial B/W 6XXX/91XX-type equipment.

1) You can use SPD (setpagedevice) commands embedded as PostScript in
PostScript XObjects to control low level device characteristics of the
printer.  This does not work on the 9110 series of equipment because PS
XObjects are not supported.

2) You can use KDK or XRX commands prepended to the front of the job.

3) You can create different page sizes and set up a job ticket to
trigger proper drawer selection based on page size.

This has been discussed in pdf-dev forum on numerous occasions.  Please
no "SPD is bad" flames - this is what works commercially.

Todd

On Friday, January 9, 2004, at 12:28 PM, xtr211668 wrote:


PDF-Forms is a service provided by PDFzone.com | http://www.pdfzone.com/ __________________________________________________________________

Mathew,
Have you considered  changing default settings of printer to duplex
and then renaming printer ("duplex" perhaps?). You, your IT or Xerox
people can then install printer again as a further printer under
original name and defaults.
Simple printer selection  ("duplex") would automatically produce
duplexed pages.

bob,
jvh

Larson, Mathew A wrote:

PDF-Forms is a service provided by PDFzone.com |
http://www.pdfzone.com/
__________________________________________________________________

I asked a similar question a couple a months ago about embedding
commands to switch trays.  The solution wasn't successful.
We have a web app where we are creating PDFs from XML documents.  We
have a process where at the end of the day, we can merge all the
different PDFs created throughout the day into one giant PDF.  We'd
like
to print the entire stream on our batch (Xerox) printers.  The
printers
we have (I'm not sure model #) don't allow the operators to easily
switch the job stream to duplex.  Is there a way to embed directly
into
the PDF without ripping to postscript to allow it print the stream in
duplex mode and then at the end of the stream switch it back to
simplex.


I would appreciate a quick response as this is still our biggest issue
to resolve (along with tray switching which we are putting off for the
interim) and we are coming up to the go live date.


Matt

Mathew A. Larson American Family Insurance
[EMAIL PROTECTED]

To change your subscription:
http://www.pdfzone.com/discussions/lists-pdfforms.html





-- John van Hulst Consultant/Graphics

JvH GRAPHICS
Mezzanine
233 Willis Street
PO Box 27 010
Wellington CBD
New Zealand

Voice    64-4-384 6212
Fax       64-4-384 7900
Email    [EMAIL PROTECTED]




To change your subscription:
http://www.pdfzone.com/discussions/lists-pdfforms.html



To change your subscription:
http://www.pdfzone.com/discussions/lists-pdfforms.html

To change your subscription:
http://www.pdfzone.com/discussions/lists-pdfforms.html



To change your subscription:
http://www.pdfzone.com/discussions/lists-pdfforms.html



Reply via email to