Jens,
Thanks a lot for your reply:
At 08:18 PM 2/16/01 +0100, you wrote:
>First of all, I'm not sure using the AF500FTZ for fill in purposes is such a
>good idea. The light is hard and there is no guiding light available. But
>you might give it a try!
I actually wasn't thinking direct light, perhaps bouncing off a reflector or
shooting it through a small diffusor. But you're right, the lack of a modeling
light would certianly make judgements difficult until the film came out of the
rinse!
>Coming from Europe I think of Multiblitz (Germany), Visatec (France), Hensel
>or Cortnay first. At home I use three Multiblitz strobes. For main light I
>use a Variolite 500. And I use two minilite 200 for fill in, effects (hair
>light), backgrounds etc. I bought the three
>strobes (incl. umbrellas/softbox and stands second hand in excellent
>condition for Apr. 700$.
Sounds like a good deal. Hunt's (a US mail order place) is only about 20min
from me, and they have a used selection. I'll check them out!
>BTW, you'll definitely need a
>flashmeter - KEH sells some for 150$ or less.
Already got it covered.
>Best Regards
>Jens
Thanks a lot!
Richard Holman
[EMAIL PROTECTED]
Massachusetts Institute of Technology
Department of Materials Science and Engineering
Ceramics Processing Research Laboratory
3D-Printing Group
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users' Gallery at http://pug.komkon.org .
